Consort EV261 Power Supply

This Agilent Technologies  Preselector Power Supply Model 11974-60028 was removed from a univer (more)sity lab where it was surplus to requirements. The unit powers up and is in good cosmetic condition.

This listing is for a Powervar UPM UPS Power Supply . The unit is in full working condition and is  (more)ready for immediate release. The Powervar UPM UPS is a power conditioned, sine-wave uninterruptible power supply designed to provide clean, conditioned power free from noise, voltage spikes, and common-mode disturbances. Key Features: Power Rating: The Powervar UPM UPS has a power rating of 1440VA/1296 Watts. Inverter Waveform: The UPS produces a low distortion sine wave output. Transfer Time: The transfer time is 4 ms. Frequency: The typical frequency is 60 Hz. Efficiency: The online efficiency (without charger) is 91%. BTU/Hr: The UPS has a BTU/Hr rating of 459. THD: The total harmonic distortion (THD) with 100% resistive load is not specified. Protection Features: Surge Diverter: The UPS is equipped with a surge diverter to protect against high-voltage surges. Noise Filter: The UPS has a built-in noise filter to reduce electromagnetic interference (EMI). Low-Impedance Isolation Transformer: The UPS features a low-impedance isolation transformer to provide fully conditioned isolated power. Ground Guard Technology: The UPS is designed with Ground Guard technology to prevent ground loops and eliminate the need for special dedicated-isolated electrical circuits.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LEP MAC5000 73005020 Microscopy Stage Motor Controller Power Supply This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Model MAC 5000 73005020Serial No. 127383

Accuris myVolt Touch Power Supply The Accuris myVolt Touch is a work horse electrophoresis power sup (more)ply, ideal for efficient separation of nucleic acids and proteins as well as basic western blotting applications. Four pairs of output jacks are wired in parallel for connecting multiple electrophoresis tanks. A color touch screen allows quick setting and monitoring of all run conditions, including run time, voltage, and current. Users can select “Constant Current” or “Constant Voltage” during an electrophoresis run, keeping the chosen parameter fixed as resistance changes. The dual orientation design with rotating display allows the myVolt Touch to be installed in the most convenient location, on a shelf or bench, saving valuable space. The myVolt Touch features a logical user interface. Setting up an electrophoresis run couldn’t be easier; simply touch the parameter to select it, press the “up” and “down” arrows to adjust the value, and then touch “Start”. All parameters are always displayed, with no need to toggle between Time, Voltage or Amperage. In addition the run status is always displayed. Click Here to View Product Video INCLUDED: The Accuris myVolt Touch Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This Edwards EDM 2 High Vacuum Pump was removed from a university lab where it was surplus to requir (more)ements. The unit powers up and runs. It is in good cosmetic condition with some marks from use.

Dimensions (HxWxD): 310 x 2860 x 775 mm Worktop (WxD): 2840 x 750/380 mm Sink (HxWxD): 200 x 400 x 5 (more)50 mm

FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab This was removed from a u (more)niversity lab where it was surplus to requirements. The system is in good cosmetic condition and is made up of the following units; 1x FluidX X-Seal AAS Automated Adhesive SealerS/N: 1407 This item is in very good cosmetic condition and powered on without issue - The item carried out all of its self-checks successfully on start-up - it was hooked up to the compressor, and carried out one sealing run, performing as intended. Bambi VT75 CompressorS/N: VT75-01229 52x42x61 cm28.08 Kg This item is in excellent condition (looking almost brand new), powered on without issue, and works as intended - tested to 120 psi. 1x SMC compressor regulator (with connecting tubes)P/N: AW10-M5 2x Compressor connecting tubes 4x Rubber grommets 1x Roll of Clear Adhesive SealP/N: 43-1031 2x Spare Rollers 1x Connection Valve 1x RS232 cable

MARSHALL Select MS-SP200-1100 Spectrophotometer, 200-1,100nm Wavelength Range 200 to 1,100nm Wavelen (more)gth Accuracy ± 2nm Sample Compartment 4 position, 10mm pathlength cuvette Features - Utilizes Tungsten and Deuterium lamps for a broad wavelength coverage from 200 to 1,100nm - Features auto-setting wavelength to streamline calibration and minimize errors - Equipped with a large, backlit LCD screen that displays detailed graphical data with adjustable brightness - Stores up to 200 test results and standard curves in RAM for efficient data management - Includes a USB port for straightforward data export to external storage devices - Accommodates cuvettes with path lengths from 5 to 100mm and supports various holders The MARSHALL Select MS-SP200-1100 Spectrophotometer is a cutting-edge analytical tool tailored for extensive use in educational and research environments, where precise quantification is crucial in areas such as biotechnology, quality control of new materials, and microbial studies. Operating over a wavelength range of 200 to 1,100 nm, this device is powered by both tungsten and deuterium lamps, ensuring comprehensive coverage across a wide spectrum. The system's automatic lamp switching enhances usability, mitigating operational errors by auto-calibrating wavelengths via intuitive arrow keys. With its high resolution and performance, the MS-SP200-1100 stands out as a highly stable instrument that consistently delivers accurate results, making it a valuable asset in any laboratory setting. User experience is central to the design of the MS-SP200-1100, featuring an advanced LCD display that presents data and graphs with adjustable brightness for clearer visibility and analysis. The spectrophotometer is adept at handling a variety of sample sizes, from films as thin as 1-3mm using specific holders, to larger cuvettes with optional extensions, accommodating up to 100mm path length cuvettes. Connectivity is also a priority, with USB ports for data transfer to external storage and Bluetooth capabilities for wireless printing, ensuring seamless integration into modern lab environments. Certified with cTUVus and CE, the MARSHALL Select MS-SP200-1100 ensures compliance with the highest safety and quality standards, solidifying its role as an essential tool for scientific advancement. INCLUDED: The MARSHALL Select MS-SP200-1100 Spectrophotometer, 200-1,100nm includes: - Tungsten Lamp - Deuterium Lamp - 4 Place Cuvette Holder - 4 x 3.5ml Glass Square Cuvettes - 2 x 3.5ml Quartz Square Cuvettes - Dust Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F2 Mass Standard - knob weights, service case. Nominal value - 1000 kg.