Bio-Rad Power Pac 300 Power Supply

This Laser Quantum Finesse & FPU 35 Power Supply was removed from a university lab where it was  (more)surplus to requirements. The power supply powers up. There is no umbilical cable included so we tested it with one from a working unit. We were unable to power the laser up. The item is in good used cosmetic condition and comes in its original packaging. Included are; 1 x Laser Quantum Finesse 1 x FPU 35 Power SupplyModel - Finesse 6W It is sold for spares/repairs.

Leica Diavert Inverted Microscope w/ 4 x Objectives & 465 Power Supply This was removed from a u (more)niversity lab where it was surplus to requirements. The unit is in reasonably good cosmetic condition. There are some light tape marks from general use, as well as some patina from age. It is in good working order. Included are; 1 x Leitz Phaco A 0.25 L62 Lamp 2x Eyepieces:PERIPLAN GF 12.5x /20 M lietz Wetzlar Germany 4x Leitz Wetzlar Objectives: 1x 170/- 4/0.121x 170/- L32/0.4 Phaco 11x 170/- L20/0.32 Phaco 11x 170/- 10/0.25 Phaco Power Supply:Model. 465

Stanton Redcroft 1000ºc Tube Furance + Power Supply/Controller Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and in good working order.

Bucher Hydraulic Power Supply (QT-34-016R) This item was removed from a university where it was surp (more)lus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The previous owner assured us it was in working order. This item is fitted with a 32 amp red 4 pin plug. Specifications: - Model: QT34-016R - Serial No.: 27361952 - 3 Phase Induction Motor - Type: Y160L - No.: 381 010

Hoefer PS600 Electrophoresis Power Supply Voltage 10 to 600 V in 1 V step Current 4 to 750 mA in 1 m (more)A steps Maximum Wattage 150 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 600 V, 3 to 750 mA, 150 W - Four sets of 4 mm output jacks - Ideal choice for most electrophoresis techniques - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS600 Electrophoresis Power Supply is a robust midrange solution designed for a wide range of electrophoresis and blotting techniques, including large format and high throughput applications. Featuring a compact design, large handle, and user-friendly interface, the PS600 is easy to set up and operate in any lab setting. Its large, easy-to-read LED display allows for simple configuration of constant voltage or current parameters, timer settings up to 999 minutes, and effortless initiation of runs. With a power output range of 5 to 600 V and 3 to 750 mA, this unit provides a dependable 150 W of maximum power. The PS600 supports three key modes of operation: Constant Voltage Mode, where the power supply maintains the user-selected voltage by adjusting the current flow; Constant Current Mode, where the supply maintains the chosen current by modulating the voltage supplied; and Automatic Crossover, which seamlessly shifts between modes when the constant parameter cannot be sustained due to power limits. Additional features such as automatic recovery after power failure, short circuit and open circuit protection, and four sets of 4 mm output jacks add to its versatility and safety. Ideal for both continuous and timed operations, the Hoefer PS600 ensures reliable performance for various electrophoresis applications. INCLUDED: The Hoefer PS600 Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Mettler Toledo EN 8 SLC Deionizing Power Supply is designed exclusively for high voltage HUAG io (more)nizing units, for removal of electrostatic charge from glass, paper, and plastics. Dimensions (WxDxH): 126 x 245 x 125 mm Weight: 5 kg

Amersham Biosciences AKTA Pilot Liquid Chromatography System This was removed from a laboratory whe (more)re it was surplus to requirements. The unit powers up and has been professionally serviced. It is in good working order. A report is available on request. It is in excellent cosmetic condition with minor marks.

Leica Microsystems Type - TCS SP2 Confocal Microscope System This was removed from a university lab  (more)where it was surplus to requirements. What is included is in good working order, but the system is not complete. It is missing the following; Table topCooling unitMicroscope isolation tableCameraFlexi tube for prior unit.Bulb for prior unit.There may be more missing parts, but we are unable to confirm. It is in good cosmetic condition with minor marks. Included are; Leica TCS SP2 MicroscopeModel: RCS SP2Serial#: 142400026 Attached to microscope:Leica ∞/0.17/E HCX PL APO 40x/1.25-0.75 OIL CS Leica ∞/-/C HC PL APO 20x/0.75 Leica ∞/0.17/E HC PL APO 10x/0.40 CS 2 x Eyepieces HC PLAN S 10x/22 Leica Condenser 0.53 S 23 (521500)Leica C Mount Adaptor 0.5x : 1/2" = 16 (541511) All other items included: Prior Lumen200Model: L200/CSerial#: 70808 Ernst Leitz Wetzlar GmbhType: 307-072.45Hg 100 W Bulb Leica Power Supply for DiodeLaser COH 405nm, 25mWPart#: 1530910001 03 Leica DM R ManualLeica Confocal SoftwareLeica TCS User Manual Leica PC with Software installed. Leica Dust cover for Microscope and PC.

This BMG Lab Technologies Fluostar Galaxy Microplate Reader was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but would not connect to a PC (not included) when we tried to test it. Other units would connect to this same PC, so we are sure it is the unit itself at fault, and not the PC. It is in otherwise good cosmetic condition with minor marks but is sold for spares/repairs.

Gilson Pipetman F167400 Classic Large Volume Starter Kit The PIPETMAN® Classic line is one of the wo (more)rld standards in pipetting and offers a wide range of continuously adjustable, air-displacement pipettes with legendary accuracy and precision. The PIPETMAN Classic Large-Volume Kit provides two pipettes that cover large volume transfers from 500µL to 10 mL, along with appropriate filters. Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Classic offers uncontested durability and reliability. Built-to-last, it is the economical solution for years of pipetting.

Edwards acoustic enclosures provide soundproofing for your pump operations in laboratories or sensit (more)ive industrial work environments. High noise absorption materials reduce pump noise by up to 9 dB (A), without adversely affecting your vacuum pump efficiency. A integrated air-cooling fan provides ventilation to maintain your optimum pump running temperature.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW