Climatic chamber KK 700 POL-EKO

MEMMERT ICH750eco climatic chamber - 750 litres ICH model: Incubator / drying oven with humidity con (more)trol Tested at 35°C / 65% humidity Year of manufacture: 2019 Non-refrigerated chamber (non-functional refrigeration unit) Temperature range: Ambient temperature + 10°C to 60°C Temperature delta, regulation: ± 2°C Adjustable useful humidity (% rh): 10 to 80 Volume: 749 litres Case: stainless steel exterior and interior Double glazed interior doors Intuitive, touch control interface and programmable settings 40 mm diameter access port at the rear as standard Models on casters Operation: with distilled water Supplied with 2 stainless steel grids and water tank External dimensions L x D x H (mm): 1224 x 834 x 1950 Internal dimensions L x D x H (mm): 1040 x 600 x 1200 Weight: 249 kg Power: 1350W Capacity Maximum load per tray (kg): 30 Maximum load per device (kg): 200 Equipment tested at: 35°C - 70% humidity 50°C - 50% humidity Test possible with your values ​​on request

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

CLIMATE CHAMBERS KKP SMART PRO POL-EKO KKP - STABILITY AND NO VIBRATION WITH PELTIER TECHNOLOGY The  (more)Peltier technology of the KKP series offers stable, silent and vibration-free climate conditions, maintaining exceptional temperature and humidity variations and fluctuations. They are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 70°C (max 20°C below room temperature; without humidity) and thanks to a steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKP Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Temperature range without humidity 0…+70°C (max 20°C below room temperature) - Temperature range with humidity +5…+70°C (max 20°C below ambient temperature) - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and - Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKP SMART PRO SERIES POL-EKO offers 2 models of climatic chamber with Peltier cell: KKP 240 of 245 liters and KKP 750 of 749 litres. Reliable. For peace of mind. The Peltier cell-based cooling system features excellent temperature variation and fluctuation. It improves the temperature recovery time (for example after opening the door) and the humidity inside the chamber is extremely stable. In the images below, the temperature/humidity diagram with the test points displayed according to the ICH Q1 A (R2) guidelines and the recording of temperature and humidity over time. STEAM HUMIDIFIER KKP climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Furthermore, thanks to their wide temperature and humidity range they can be used for testing electronic components, plastics or building materials. ENERGY SAVING Thanks to latest generation technology, the KKP series humidifier heats very quickly, using only the water necessary. LOW WATER CONSUMPTION Water consumption is only 90 ml per day for KKP 240 and 290 ml per day for KKP 750 (at 40°C, 75% RH). Water consumption is so low that the tank will only need to be refilled every two months. Furthermore, thanks to a heater in the waste water tank, no maintenance is required and the climatic chamber can be installed anywhere. PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the structure and accessories of the KKP models. 1 - touch control panel 2 - USB port 3 - open door sensor 4 - ø30mm access port for external sensor 5 - room fan 6 - door handle with key lock 7 - shelf 8 - internal glass door 9 - main power socket 10 - fan for electronic compartment 11 - LAN 12 - cooling system based on Peltier modules 13 - humidifier module 14 - drying module 15 - demineralised water tank Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Stainless steel wire shelf - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door

This Sanyo Versatile Environmental Test Chamber Model - MLR-351H was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer(not included). The water tank for humidity operation is missing from this unit, therefore it is listed as Spares/Repair. The temperature was first set to 37˚c, when reached, the thermometer read 38.8˚cThe temperature was then set to the maximum temp of 50˚c, when reached, the thermometer read 52.2˚cFinally, the temperature was set to the minimum of 0˚c, when dropped to, the thermometer read 3.1˚c. Inside dimensions - D47 W50 H123cm1 Shelf - 41 x 49cm It is in reasonably good cosmetic condition with marks from use.

DW Scientific MACS VA500 Microaerophilic Workstation Lab This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). It is in reasonable cosmetic condition, with marks from use.

Memmert HCP105 Humidity Chamber 107L, 115V Temperature Range Ambient +7°C to 90°C Humidity Control  (more)20 to 95% RH, or no RH Chamber Volume 107L (3.8 cu. ft.) Features - Ideal for climate and temperature testing, including accelerated life and 85/85 tests - Unsurpassed temperature and humidity uniformity across the chamber interior - Easy-to-use ControlCOCKPIT interface and AtmoCONTROL software for intuitive programming - Durable stainless steel construction that’s scratch-resistant and easy to clean - Six-sided heating, including heated inner glass door, to prevent condensation - Aluminum thermal layer for optimal temperature distribution and energy retention - Battery-buffered ControlCOCKPIT and optional MobileALERT for enhanced monitoring - Wide range of customizable test parameters for environmental simulation - Rear-panel feed-through and process runtime delay for precise test control - Comprehensive alarm functions and three-fold overtemperature protection for sample safety The Memmert HCP105 Humidity Chamber 107L, 115V is engineered to deliver precise climate and temperature control, making it ideal for a wide range of environmental and accelerated life tests, including the rigorous 85/85 tests. Offering a temperature range from Ambient +7°C to 90°C and active humidity control from 20% to 95% RH, this chamber creates a stable and highly customizable testing environment with an exceptional homogeneity of temperature and humidity throughout. Designed with Memmert’s user-friendly ControlCOCKPIT interface and the advanced AtmoCONTROL software, it features intuitive “Touch, turn & go” operation, allowing for straightforward programming of complex test parameters. Constructed with robust stainless steel that is scratch-resistant and hygienic, the HCP105 is built to withstand extensive use while maintaining a sleek, easy-to-clean design. Its advanced heating concept includes heating elements on all six sides and a heated inner glass door to prevent condensation and ensure uniform conditions. An integrated aluminum thermal conductive layer aids in maintaining optimal temperature distribution, while also providing a heat reservoir in case of power fluctuations. The chamber’s efficient humidity control prevents condensation buildup, protecting sensitive samples and reducing maintenance requirements. To support continuous and demanding tests, the HCP105 includes various convenience features like a rear-panel feed-through, battery-buffered ControlCOCKPIT for enhanced security, and optional MobileALERT for remote monitoring of alarm conditions via email or SMS. Additional safety features include three-fold overtemperature protection and real-time display of all essential parameters. With comprehensive programming options, reliable alarm functions, and precise environmental simulation, the Memmert HCP105 ensures both safety and accuracy, providing an optimal solution for laboratories focused on climate and temperature testing. INCLUDED: The Memmert HCP105 Humidity Chamber 107L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Water Tank - 2 x Sponge Plugs for Silicone Entry Ports - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

BioTrove OpenArray NT Cycler qPCR Instrument Model - 20001-200 & Software This was removed from (more) a university lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Included are; BioTrove OpenArray NT Cycler:Model - 20001-200SN - 0498 Accessories: 1x BioTrove OpenArray Case Sealing Station:Model - 20253SN - CS0571The unit powers on and is in good cosmetic condition. Software CDs 1x Open Array Real-time qPCR Analysis Software CD:item no. 4435938Version 1.0.4 1x Open Array Instrument Configuration CD: Part no. 20395 1x Open Array SNP Genotyping Analysis Software CD:Part no. 20919 Version 1.0.5

F1 Mass Standard - knob weights without adjustment chamber. Nominal value - 2 kg.

The 21 CFR Part 11 Compliance Module is a solution especially useful for those users who are obliged (more) to conform to provisions of 21 CFR Part 11 and EU GMP Part 4, Annex 11 regulations. These two documents determine the rules for using electronic records and signatures. Data protection is guaranteed by: advanced password settings, control of logging correctness, various permission levels, data management access, backup, electronic signature, time-defined automatic logout, modification record to Audit Trail file. The module includes "Audit Trail". Audit Trail is a kind of a log where all modifications of balance settings, changes in database records and user activity are recorded. Audit Trail, for example, keeps record of previous and new modifications in databases and informs by whom and when they were introduced. This log allows the administrator to track and find out who logged in, when, who signed a document or who used invalid password. The Audit Trail Reader freeware allows users, upon connection with a balance, to display Audit Trail log and manage it by generating reports of various formats: pdf, xls, csv, html.