Climatic chamber KK 240 POL-EKO

This Sanyo Versatile Environmental Test Chamber Model - MLR-351H was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer(not included). The water tank for humidity operation is missing from this unit, therefore it is listed as Spares/Repair. The temperature was first set to 37˚c, when reached, the thermometer read 38.8˚cThe temperature was then set to the maximum temp of 50˚c, when reached, the thermometer read 52.2˚cFinally, the temperature was set to the minimum of 0˚c, when dropped to, the thermometer read 3.1˚c. Inside dimensions - D47 W50 H123cm1 Shelf - 41 x 49cm It is in reasonably good cosmetic condition with marks from use.

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

CLIMATE CHAMBERS KKS SMART POL-EKO KKS - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed without (more) compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 100°C and thanks to an steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKS Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKS SMART PRO SERIES POL-EKO offers 4 climatic chamber models with capacities from 109 to 749 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). STEAM HUMIDIFIER The KKS climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Compared to KK chambers they have a wider temperature and humidity range and can be used for testing electronic components, plastics or building materials. NOTE: common water (conductivity 125-1250 μS/cm) can be used as a source. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Power cable 3 - Connectors 4 - Connection to tap water 5 - Connection to the reverse osmosis system 6 - Control valve 7 - Connection to demineralised water 8 - Connection to the drain 9 - Connection for assistance 10 - LAN port 11 - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Stainless steel wire shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Internal socket - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access hole - Additional 30 mm access hole - Access control system (card, key tag or device equipped with NFC, for example smartphone) ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory. FUN FACT? Thanks to the climatic chambers it is possible to create excellent food products, such as black garlic, which needs to ferment at stable temperatures and humidity. Download the informative pdf: Black Garlic with POL-EKO.

MEMMERT ICH750eco climatic chamber - 750 litres ICH model: Incubator / drying oven with humidity con (more)trol Tested at 35°C / 65% humidity Year of manufacture: 2019 Non-refrigerated chamber (non-functional refrigeration unit) Temperature range: Ambient temperature + 10°C to 60°C Temperature delta, regulation: ± 2°C Adjustable useful humidity (% rh): 10 to 80 Volume: 749 litres Case: stainless steel exterior and interior Double glazed interior doors Intuitive, touch control interface and programmable settings 40 mm diameter access port at the rear as standard Models on casters Operation: with distilled water Supplied with 2 stainless steel grids and water tank External dimensions L x D x H (mm): 1224 x 834 x 1950 Internal dimensions L x D x H (mm): 1040 x 600 x 1200 Weight: 249 kg Power: 1350W Capacity Maximum load per tray (kg): 30 Maximum load per device (kg): 200 Equipment tested at: 35°C - 70% humidity 50°C - 50% humidity Test possible with your values ​​on request

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

·       Triple Quad MS/MS ·       Ion Max ESI, APCI and APPI Source ·       Mass Range: m/z 30–1500  (more)·       H-SRM up to 0.2Da resolution ·       Fast positive/negative mode switching ≤ 25 ms ·       2 Edwards Rotatary vane Pumps ·       Xcalibur Data System ·       Surveyor HPLC included ·      Option: Other HPLC systems available

CryoBox Freezer Rack THERMO SCIENTIFIC 5038-4322 Brand new in original packaging For standard cryoge (more)nic boxes with ease with these durable stainless steel and aluminum freezer racks, which fit most standard chest freezers and upright freezers Part number: 5038-4322 For 12 standard Cryoboxes 12-place rack (4X3) Type: horizontal Dimensions: 22.5 x 44.4 x 14.3 cm (lxWxH)

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW