ELEKTRA IE2 Motor

This listing is for a Qiagen Qiagility PCR Prep System.The unit is in full working condition and is  (more)ready for immidate realese.The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, benchtop liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and labware.HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood.Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips.Pipetting head: Single-channelPrecision: CV <1%, 5–200 µl (dry-well transfer) CV <5%, 2–5 µl (wet-well transfer) CV <10%, 1 µlTable capacity:6 x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1 x Master Mix Block 1 x Reagent BlockTip disposal:All used tips ejected externally — no waste accumulation on the worktableTip volume:1–200 µlUV lamp Preinstalled UV lamp for worktable decontaminationDeck Dimensions 19.5×14”Dimensions 21x25x18″Electrical 100–240 V AC, 250 VA, 50–60 HzWeight 90.2 lbEnvironmental Tolerances Operating temperature, 15–30 °C (59–86°F), Operating humidity: 40–70%

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 3000 model (measured with ethanol): - at 20°C, 3.00 kW - at 10°C, 2.40 kW - at 0°C, 1.68 kW - at -10°C, 1.03 kW - at -20°C, 0.60 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

Hoefer SUB15 Standard Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 15 x 15 cm Maximum P (more)ower Settings 300 V, 200 mA, 60 W Maximum Buffer Volume 1.2 L Features - The market standard—a 15 x 15 cm gel tray, with comb options ranging from 1 to 30 samples - Multi-channel pipette compatible combs—with a maximum 30 sample throughput reduce gel loading time, while preparatory combs enable nucleic acids to be scaled-up for cloning - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Buffer recirculation ports—may be connected to a peristaltic pump for buffer recirculation during electrophoresis to maintain buffer pH and prevent ionic gradient formation - Colored loading strips—for easy well detection when loading - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory The Hoefer SUB15 Standard Submarine Gel Electrophoresis Unit is a versatile and reliable choice for screening nucleic acid samples, from DNA mini-preps to PCR products, with a maximum throughput of 120 samples. The unit includes a spacious 15 x 15 cm gel tray, providing ample room for various sample sizes and comb options ranging from 1 to 30 samples, ideal for labs requiring flexibility in their electrophoresis setup. Designed for efficiency, the SUB15 features multi-channel pipette-compatible combs that reduce gel loading time, while preparatory combs enable nucleic acids to be scaled up for cloning applications. The UV-transparent running tray allows safe gel imaging without handling, while buffer recirculation ports, compatible with a peristaltic pump, help maintain buffer pH and prevent ionic gradient formation. Color-coded, height-adjustable combs allow easy identification and control over well depth, and side handles ensure safe transport around the lab. With durable casting gates, the SUB15 seals quickly and securely, streamlining gel casting without the need for tape. INCLUDED: The Hoefer SUB15 Standard Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Running Tray with Casting Gates* - 1 mm thick, 16-well combs, 2 pcs - Colored Loading Strips - Buffer Recirculation Ports, 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience MM71GX1A110C MM7 Benchtop Chiller with Centrifugal Pump, 120V, 60Hz3D Visualization of t (more)he Polyscience Benchtop ChillerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. LM-Series and MM-Series Compact Chillers provide cooling power for demanding applications and serve as economical alternatives to tap water cooling systems. They feature a microprocessor-based controller, digital temperature display (C or °F), and simple operation and maintenance. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended. LM-Series and MM-Series Chillers are equipped with a magnetic drive centrifugal pump. Wetted parts within the recirculation system are brass, copper, stainless steel, EPDM rubber, Alcryn, nylon, PVC, and polyethylene. Features Precise and stable temperature control at low temperatures Large, easy to read LED display Space-saving, benchtop design Cooling at ambient temperatures as high as 35C Low flow shutoff and alarm, high and low temperature alarms Simple setup, operation, and maintenance Choice of two different centrifugal pumps Fluid level indicator RS232 communication and external water filter optional INCLUDED: The Polyscience MM71GX1A110C MM7 Benchtop Chiller , -5°C to 50°C, 460W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Sample capacity: one 384 well PCR plate Temperature control range of the block: 4°C to 99°C Gradient (more) range: 1°C to 20°C Temperature range of the gradient: 30°C to 99°C Temperature control range of the lid: 37°C to 110°C Block hmogeneity (at 35°C): ≤± 0.3°C Block hmogeneity (at 90°C): ≤± 0.4°C Control accuracy: ± 0.2°C Heating rate: 4°C/s Cooling rate: 3°C/s Dimensions (WxDxH): 260 x 415 x 370 mm Weight: 18.5 kg Required software and/or control unit not included