ZWIEBEL calibration weight 100mg class F1 INOX

ZWIEBEL calibration weight 200g class F1 INOX Stainless steel laboratory calibration weight Brand: Z (more)WIEBEL Weight: 200 g Type / class: F1 maximum permissible error: ± 1mg Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic box uncalibrated weight

ZWIEBEL calibration weight 1kg class M1 INOX Laboratory calibration weight in stainless steel Brand: (more) ZWIEBEL Weight: 1 kg / 1000g Type / class: M1 maximum permissible error: ± 50mg LZ Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic case uncalibrated weight

ZWIEBEL calibration weight 20g class M1 INOX Laboratory calibration weight in stainless steel Brand: (more) ZWIEBEL Weight: 20 g Type / class: M1 maximum permissible error: ± 2.5mg LZ 67 Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic box uncalibrated weight

ZWIEBEL calibration weight 50g class F1 INOX Stainless steel laboratory calibration weight Brand: ZW (more)IEBEL Weight: 50 g Type / class: F1 maximum permissible error: ± 0.3 mg Weight checked on a precision balance at 0.01 g (10 mg) - see photo In its plastic box uncalibrated weight

ZWIEBEL calibration weight 200g class F1 INOX Stainless steel laboratory calibration weight Brand: Z (more)WIEBEL Weight: 200 g Type / class: F1 maximum permissible error: ± 1mg Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic box uncalibrated weight

ZWIEBEL 50mg Class F1 INOX Calibration Weight Stainless steel laboratory calibration weight Brand: Z (more)WIEBEL Weight: 50 mg Type / Class: F1 Maximum permissible error: ± 0.04mg Weight checked on a precision balance at 0.0001g (0.1mg) - see photo In its plastic box Uncalibrated weight

This Olympus IX50/Arcturus LCM2106 PixCell 2E Microdissection Microscope System was removed from a u (more)niversity lab where it was surplus to requirements. All parts are in good used cosmetic condition but they do have signs of general use. We have powered it all up and the system appears to function as it should. We were able to view a slide via the software on the PC. It is an excellent system and is in full working order. It has been professionally serviced. The comments from the service engineer are below. It appears to be in good working condition but we have no way of checking the laser. The internal halogen works fine and so does the external metal halide illumination. Objectives UPlanFl 4x/0.13 ∞/- UPlanFl 10x/0.30 ∞/- LCPlanFl 20x/0.4 ∞/- LCPlanFl 40x/0.60 ∞/- Diagnostic Inst 1x C Mount adaptor. Some evidence of bleaching of fluorescence filters. The system consists of: 1 x Olympus IX50 Microscope Modified by Arcturus.With PixCell IIE LCM2016 Laser System (Manufactured September 2002).The microscope is fitted with:2 x Olympus WH10X/22 Eyepieces. Olympus Objectives: 1 x OlympusLCPlanFl40x/0.60∞/ 1x OlympusLCPlanFl20x/0.40∞/ 1 x OlympusUPlanFl10x/0.30∞/ 1x OlympusUPlanFl4x/0.13∞/- 1 x ZEISSPlan-NEOFLUAR40x/0.75∞/0.17(not fitted in the microscope). 1 x Dell Dimension 3000 PC with keyboard, mouse & monitor.The PC has Arcturus ARC200 software installed and is fitted with a PCi card interface for the Hitachi camera. 1 x Olympus BH2-RFL-T3 Lamp PSU.It is showing 71.2 lamp hours. 1 x Olympus U-ULS100HG 100w lamp 1 x Hitachi KP-D590P CCD Color Camera. 1 x Camera Remote Unit. 1 x Arcturus PixCell IIe Control Unit. 1 x MARX Crypto-Box. 1 x Arcturus 12109-00D Sample holder. Various cables to connect the whole system. Manuals.

BD Biosciences FACSAria Cell Sorter with Fluidics Cart & Accessories This item was removed from  (more)a university lab where it was surplus to requirements. The fluidics cart powered on successfully, while the main unit was not powered on due to the presence of a class 3B laser. The system is in good cosmetic condition and includes various accessories. The previous client has stated it this system is not currently in working order due to it being decommissioned for an extended period. The fluidics cart and temp control unit are fully working. It is listed as Spares/Repair. Specifications: - FACSAria Cell Sorter - S/N: P07800002 - FACSAria Fluidics Cart - S/N: N/A Included Accessories: - 1 x Peak Telecentric Lupe 7x - 8 x Waste Caps (PN: 335917) - 2 x BD Biosciences Adjustable Nozzle 100um Rev A (PN: 342909) - 5 x BD Biosciences Adjustable Nozzle 100um Rev B (PN: 337612) - 2 x BD Biosciences Adjustable Nozzle 70um Rev B (PN: 342908) - Variety of tube holders - Assorted loose lids, tubing, lubricant, and small replacement parts

BD FACSCanto Flow Cytometer System with PC, Software, and Accessories This system was removed from a (more) university laboratory where it was surplus to requirements. The system includes a BD FACSCanto Flow Cytometer, Fluidics Cart, and a complete PC setup with software and manuals. The system was fully assembled and tested for startup; it communicates well. It will require installation by a qualified engineer. Components: BD FACSCanto Flow Cytometer - Catalog No.: 335860 - Serial No.: V0059-Model 1 BD FACSCanto Fluidics Cart - Catalog No.: 335863 - Serial No.: N/A - Powers on, with rust on the back. - Included Bottles: - Waste Bottle - DI Water Bottle - BD FACSRinse (REF 340346) - 2 x BD FACSClean (REF 340345) PC & Accessories: - HP Z240 PC: Powers on, software installed. - Sony 23" Monitor: Powers on. - HP Mouse and Keyboard. - Cables: 2 x Ethernet cables, 1 x Comms cable. - Windows 7 has been installed and a new copy of FACSDiva 8.0.2. Included Software and Manuals: - Dongle - CompuCyte Quantitative Imaging Cytometry Software - BD FACS Academy Introduction to Flow Cytometry CD - 2 x BD FACSCanto System Software CDs - BD Cytometer Set Up & Tracking Application Guide - BD FACSDiva Software Quick Start Guide - Getting Started with BD FACSDiva Software Manual - BD FACSCanto Safety & Limitations Manual - BD High Throughput Sampler Safety & Limitations Manual - FACSCalibur Training Manual - BD FACSCanto Workbooks (Yellow Folders)

Eppendorf A-2-DWP Microplate Rotor with Buckets for 5804/R & 5810/R The Eppendorf A-2-DWP Micro (more)plate Rotor features two deep well-platebuckets, which can each hold up to two plates for simultaneous processing of upto 192 samples. Reaches speeds of 3,700 RPM with a max RCF of 2,250 x g. Thisrotor can accommodate MTP, cell culture plates, DWP, or filtration plate kits.The A-2-DWP can be used with Eppendorf centrifuge models 5804, 5804R, 5810, or5810R. INCLUDED: The Eppendorf A-2-DWP Microplate Rotor with Buckets for 5804/R & 5810/R includes: - Two Deep Well Microplate Buckets - Full 1 Year Parts and Labor Warranty Eppendorf A-2-DWP Microplate Rotor SpecificationsMax Rotational Speed3,700 rpmMax RCF2,250 x gMax Capacity2 x 5 MTP; 2 x 4 cell culture plates; 2 x 2 DWP; 2 x 1 filtration plate kitsAutoclavable121°C for 20 minutesCompatibilityEppendorf 5804/ 5804R/ 5810/ 5810R

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, glass draft shield with top mounted side doors and flip / slide top door (1mg models), front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

ING Climas RAF 9000C laboratory refrigerator. Temperature range from +2 ºC to +14 ºC. Capacity 890 L (more). Forced air recirculation. Homogeneity in the chamber ± 1.5 ºC. Pt 1000 temperature probe with a precision of 0.1 ºC. Continuous paper temperature recorder. Alarm: acoustic and visual for maximum and minimum temperature as well as voltage failure. Blind door, with a large handle. Dimensions: external 1245*750*1950mm; internal 1120*580*1280 mm. ING Climas RAF 9000C laboratory refrigerator. PROFESSIONAL LABORATORY REFRIGERATORS