Millipore MAirT Isolator Pump Pumpe ATBPUMP01

This listing is for a TSI VelociCalc 5725 Air Velocity Meter.The unit is in full working condition a (more)nd is ready for immidate realese.The TSI VelociCalc Rotating Vane Anemometer 5725 is a versatile instrument designed for measuring air velocity and volume flow rates in various environments. It is ideal for HVAC testing, facility maintenance, and industrial hygiene assessments. The device uses a rotating vane to provide accurate and reliable airflow readings, especially in situations where duct sizes and airflow characteristics may vary.Key Features:Air Velocity Measurement:Range: 50 to 6000 ft/min (0.25 to 30 m/s)Ensures accurate measurements in a wide variety of airflows, from low to high-speed ducts.Volume Flow Rate:Measures and calculates volume flow rates when duct dimensions are inputted into the device.This feature is especially useful for ventilation and HVAC system performance testing.Temperature Measurement:Range: -4°F to 140°F (-20°C to 60°C)Provides air temperature measurements, allowing users to correlate velocity data with temperature.Large Vane Probe:The 100 mm (4 in.) rotating vane is ideal for making spot measurements at supply and return grilles.Provides highly repeatable readings, making it ideal for balancing HVAC systems.User-Friendly Interface:The digital display is easy to read and provides instant feedback on air velocity, temperature, and calculated volume flow rate.The device features intuitive controls, making it simple to operate even in the field.Data Logging Capabilities:Includes data logging for up to 12,700+ samples and 100 test IDs.This feature allows users to record readings for long-term assessments and for generating reports.Adjustable Time Constant:Provides the ability to average fluctuating readings for more stable and meaningful data in turbulent airflow environments.Rugged and Durable Design:Built to withstand field use with a sturdy construction that can endure harsh conditions and frequent handling.Specifications:Air Velocity Range: 50 to 6000 ft/min (0.25 to 30 m/s)Temperature Range: -4°F to 140°F (-20°C to 60°C)Volume Flow: Calculated based on user-input duct dimensionsDimensions: Compact and lightweight design, with a 100 mm (4 in.) vane diameterPower Source: Powered by four AA-size batteries or AC adapter

Sherwood M851 Air Compressor This item was removed from a university lab where it was surplus to req (more)uirements. The item is in good cosmetic condition, powers on, and is fully functional.

Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4 This unit came from an engineering  (more)university. It was used to develop and test for the motor industry. We were assured it was in good working order.  The Flange/Working Section External Dimension 56cm X 56cm Included is a basic working section with two access panels. Approximate size of working section 56cm x 56cm X 100cm. The Fan type is a K. Blackman 28 series. The fan uses 7.5 kw Electric Motor with an inverter control. It is split into 4 sections; Unit 1- Main Fan/Control Unit- 130cmx130cmx175cm.-330 kgUnit 2- Joint Section- 68cmx62cmx86cm.- 24 kgUnit 3-Large Tunnel Section- 217 cmx77cmx149cm.- 150 kgUnit 4- Work Access Unit- 57cmx54cmx81cm.- 22 kg. Please enquire if you would like a delivery quote. The last time when the nozzle calibration was ran for that tunnel and it went up to a measured airspeed of 26m/s (94km/h).

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel This was removed from a univ (more)ersity engineering department where it was surplus to requirements. The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling. It is in five sections: Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor. Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters. Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm. Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal. Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.

HANNA HI97733 Ammonia Photometer, up to 100.0 mg/L New equipment in its original packaging HI97733 c (more)omes with 2 measuring cuvettes, plastic stoppers and caps and batteries. Range: 1.0 to 100.0 mg/L (NH4+) Resolution: 0.1 mg/L Accuracy at 25°C: ±0.5 mg/L ±5% of reading Method: Adaptation of the “ASTM Manual of Water and Environmental Technology, D1426-92” method, Nessler method Light source: LED with 420 nm narrow bandwidth filter Light detector: Silicon photocell Batteries/Lifespan: 3 x 1.5 V AA / > 800 measurements without backlight On-demand storage: Up to 50 measurements for on-screen recall Auto-off: After 15 minutes of non-use / After 30 min of non-use before a measurement Dimensions/Weight: 142.5 x 102.5 x 50.5 mm / 380 g

Sample capacity: one 384 well PCR plate Temperature control range of the block: 4°C to 99°C Gradient (more) range: 1°C to 20°C Temperature range of the gradient: 30°C to 99°C Temperature control range of the lid: 37°C to 110°C Block hmogeneity (at 35°C): ≤± 0.3°C Block hmogeneity (at 90°C): ≤± 0.4°C Control accuracy: ± 0.2°C Heating rate: 4°C/s Cooling rate: 3°C/s Dimensions (WxDxH): 260 x 415 x 370 mm Weight: 18.5 kg Required software and/or control unit not included

Frame intended for 4-load-cell powder-coated scales C10, that are to be embedded in the ground.

RS 232 cable: scale (PUE C/31/H indicator) - computer. Lenght 2 m. Cable types: Standard P0259.2: 2  (more)m Customized P0259.5 (extra charge): 5 m Customized P0259.10 (extra charge): 10 m Compatible with: Scales operated via PUE H315 indicator Scales operated via PUE H315/Z indicator PUE H315 indicator PUE H315/Z indicator

It is 20 cm long. It is compatible with: 5Y, 4Y, X2, C32, R2, WLC, WTC, C315, CY10, WLY and WPY seri (more)es balances and scales.

Scilogex DS-160/10 Generator Probe for D-160The Scilogex DS-160/10 Generator Probe for D-160 has a d (more)iameter of 10mm x length 120mm for solid/liquid media volumes from 1-250ml. To be used with D-160 Homogenizer. INCLUDED: The Scilogex DS-160/10 Generator Probe for D-160 includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty