Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure

This listing is for a TSI VelociCalc 5725 Air Velocity Meter.The unit is in full working condition a (more)nd is ready for immidate realese.The TSI VelociCalc Rotating Vane Anemometer 5725 is a versatile instrument designed for measuring air velocity and volume flow rates in various environments. It is ideal for HVAC testing, facility maintenance, and industrial hygiene assessments. The device uses a rotating vane to provide accurate and reliable airflow readings, especially in situations where duct sizes and airflow characteristics may vary.Key Features:Air Velocity Measurement:Range: 50 to 6000 ft/min (0.25 to 30 m/s)Ensures accurate measurements in a wide variety of airflows, from low to high-speed ducts.Volume Flow Rate:Measures and calculates volume flow rates when duct dimensions are inputted into the device.This feature is especially useful for ventilation and HVAC system performance testing.Temperature Measurement:Range: -4°F to 140°F (-20°C to 60°C)Provides air temperature measurements, allowing users to correlate velocity data with temperature.Large Vane Probe:The 100 mm (4 in.) rotating vane is ideal for making spot measurements at supply and return grilles.Provides highly repeatable readings, making it ideal for balancing HVAC systems.User-Friendly Interface:The digital display is easy to read and provides instant feedback on air velocity, temperature, and calculated volume flow rate.The device features intuitive controls, making it simple to operate even in the field.Data Logging Capabilities:Includes data logging for up to 12,700+ samples and 100 test IDs.This feature allows users to record readings for long-term assessments and for generating reports.Adjustable Time Constant:Provides the ability to average fluctuating readings for more stable and meaningful data in turbulent airflow environments.Rugged and Durable Design:Built to withstand field use with a sturdy construction that can endure harsh conditions and frequent handling.Specifications:Air Velocity Range: 50 to 6000 ft/min (0.25 to 30 m/s)Temperature Range: -4°F to 140°F (-20°C to 60°C)Volume Flow: Calculated based on user-input duct dimensionsDimensions: Compact and lightweight design, with a 100 mm (4 in.) vane diameterPower Source: Powered by four AA-size batteries or AC adapter

Sherwood M851 Air Compressor This item was removed from a university lab where it was surplus to req (more)uirements. The item is in good cosmetic condition, powers on, and is fully functional.

Jun-Air Oiless Piston Air Compressor OF301-4B This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up and is in working order. It is supplied with a manual. It is ing good cosmetic condition with minor marks.

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel This was removed from a univ (more)ersity engineering department where it was surplus to requirements. The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling. It is in five sections: Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor. Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters. Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm. Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal. Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.

Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. The lab confirmed it was working prior to removal.

Increase productivity with Thermo Scientific Multidrop 384 Reagent Dispenser, which offers continuou (more)s high-speed dispensing of various liquids with excellent precision and robot compatibility. The Multidrop 384 Reagent Dispenser portions a wide range of solutions into 96- and 384-well plates across a 5 to 395 μL volume range, providing reliable microvolume dispensing for pharmaceutical and biotechnology laboratories. Precise and reproducible dispensing results High-speed dispensing for high assay throughput Easy setup with quick plate and volume selection Easy to integrate with different robotic setups for higher throughput For use with standard cassettes only (Cat. No. 24072670, not included) Recommended for: Assay development Primary and secondary screening Compound storage Genomics and proteomics research Cell based assays ELISA assays

This Panasonic CO2 Laboratory Incubator Model - MCO-18AC-PE was removed from a university lab w (more)here it was surplus to requirements. The unit has been professionally serviced. It is in good working order. It will require calibration on installation. It is in good cosmetic condition and is clean inside. Internal dimensions - L51 x W48 x H67cm2 Shelves - 46 x 45cm

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.