Kramer 16X16 RGBHV & Audio Matrix Model VP-1616

2x Canon DM-100 Directional Stereo Microphones These Canon DM-100 Directional Stereo Microphones wer (more)e removed from a university lab where they were surplus to requirements. Both items are in very good cosmetic condition and include all original packaging, we are unable to test them at our facility.

Kramer 16X16 RGBHV & Audio Matrix Model VP-1616 This was removed from a university where it was  (more)surplus to requirements. The unit powers on and is in good cosmetic condition. The Faceplate of the unit can come off via 2x quick-release screws. One of the quick-release screws has snapped on the RHS of the unit leaving the faceplate wobbly. The fans are working but it has not been tested further.

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB This was removed from (more) a university where they were surplus to requirements. 1x Yamaha RX V1500S/N: Y066054VX 1x Extron MVX 84 VGA AS/N: 33-1023-01 REV C 1x AMX NI-3000 Integrated Controller 1x AMX NFX-Mini 1x Universal Open Rack Cabinet with Wheels, black 1x Jamo D 6SUBS/N: 16211050024 All items are in good cosmetic condition and powered on without issue - The control buttons are fully functional and performing as intended.

TDT Tucker Davis Technologies Audio Processing System This system was removed from a university lab  (more)where it was surplus to requirements. All units power on but have not been tested further. The system includes a number of cables. Modules (Front, Top to Bottom):System ID 3035- MA3 Stereo Microphone Amp - RP2.1 Enhanced Real Time Processor - PA5 Programmable Attenuator - SM5 Signal Mixer System ID 2901- MA3 Stereo Microphone Amp - RP2.1 Enhanced Real Time Processor - PA5 Programmable Attenuator - SM5 Signal Mixer Back Units:- Daxten Scout Combo - Parasound Zamp v.3 Zone Amplifier All items are in good cosmetic condition.

Christie Mirage Model S+4K Commercial Projector This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but is displaying with a green tinge. We were unable to get this to change. The lamp has run for 780 hours. It is sold for spares/repairs.

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. 1 - Aluminum alloy plate with ceramic coating 2 - Main switch 3 - Speed control knob 4 - Temperature control knob 5 - Display A - Probe led B - Temperature setpoint led La piastra riscaldante realizzata in alluminio con rivestimento in ceramica, conferisce: • Ottimale distribuzione del calore con una elevata potenza specifica grazie alla configurazione circolare • Ottima omogeneità di temperatura in tutti i punti della piastra • Elevata resistenza a fatica termica e shock termici • Elevata resistenza ad agenti chimici e abrasioni superficiali COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-81 swing-out rotor (max 4000 rpm) 4x Eppendorf bucket 4x Eppendorf bucket aerosol-tight lid 4x Eppendorf MTP carrier 4x Eppendorf insert (10x 15 mL falcon tube capacity) 4x Eppendorf insert (5x 50 mL falcon tube capacity)

FB Fans & Blowers Ltd Centrifugal Fan Type 400 (350) SBSZ100 This was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and is in full working order to 3250rpm It is in good cosmetic condition with minor marks.

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

Heidolph 036110210 Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 145mm Plate The Heidolph 036110210 (more) Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 145mm Plate is the classic among magnetic stirrers. It enables users to stir gently up to 1,400 RPM and to heat - with a high degree of precision - up to a temperature of 300°C. In addition, it convinces with its robust design and its sophisticated functionalities, such as its key and knob illumination, which provides information about active functions at any time. The dynamic rotary knobs respond to turning speed - slow for precise adjustments, or fast for bigger jumps. The locking function protects against accidental changing of the values. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50°C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm (also available with 135 mm on request). Thus, with this unique size, it is suitable for the use of many accessories and samples on a small footprint. The material used also enables the fastest heating times. The Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 145mm Plate offers you a digital display for setting your desired temperature to the degree. This precise temperature without overshooting is controlled by two selectable heating modes (FAST/PRECISE) and the optional external temperature sensor Pt1000. Click Here to View Product Video INCLUDED: The Heidolph 036110210 Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 145mm Plate includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty