Rohde&Schwarz CMU200 Universal Communication Tester B11,21,52 K21,22,23,24,42,43

Manufacturer: Rohde & Schwarz, Germany Model: CMU200 Universal Radio Communication Tester S/N: 83037 (more)7/007 Last Serviced: 2013 Description: The R&S®CMU200 universal radio communication tester brings cost effectiveness  through a variety of features, with extremely fast measurement speed and very high accuracy. In addition, the secondary remote addressing of the  tester‘s modular architecture makes for intelligent and autonomous processing of complete measurement tasks and fast control program design. The  R&S®CMU200 offers the hardware and software options necessary to handle your 3.5G, 3G, 2.5G and previous generation testing applications, including  analog. Key Facts: • Extremely high-speed testing• Highly accurate measurements• Modular future-proof design• Comprehensive spectrum analyzer• Fast switching between networks supported Technologies (some optional): • 3GPP WCDMA (FDD)• 3GPP HSPA• GSM/GPRS/EDGE• GSM-R• AMPS and IS-136• CDMA2000® 1xRTT• CDMA2000® 1xEV-DO• IEEE 802.15.1 Bluetooth® Software Options: CMU-K21 - GSM900-MSCMU-K22 - GSM1800-MSCMU-K23 - GSM1900-MSCMU-K24 - GSM850-MSCMU-K42 - GPRS @ GSM-MSCMU-K43 - EGPRS @ GSM-MS Hardware Options: CMU-B11 - OCXOCMU-B21 - Universal Signalling UnitCMU-B52 - Speech Coder f. CMU-B21CMU-U65 v04 - DSP f. Wideband Measurement Items delivered: - Rohde & Schwarz CMU200 Universal Radio Communication Tester- Power Cord- Instruction Manual as PDF via E-Mail The CMU200 is in used but good cosmetic condition - 100% functional tested.  Buy with confidence!Ready for your use!

BELLINGHAM + STANLEY Automatic Refractometer RFM840 Model: RFM 840 - 26-840 - benchtop refractometer (more) Series: RFM 800 RI scales: 1.32 - 1.58 Sugar (°Brix): 0-100 RI Resolution: 0.00001 Resolution °Brix: 0.01 Presser type: Polyacetyl Other scales: Zeiss, Oechsle (CH) & (D), Babo (KMW), Baumé, Probable Alcohol (A.P.), Sodium Chloride (NaCl), HFCS (42, 55 & 90%), Butyro among others from the instrument library Measuring temperature range: Lower limit: 0°C or 10°C below ambient temperature, whichever is higher Upper limit: approximately 100°C Temperature sensor accuracy ±0.03°C Temperature stability ± 0.05 °C Delivered without standard solution

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Fully Antistatic Weighing Chamber Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. How will you get an even more accurate weighing result? This will be ensured by a special antistatic glass coating that compensates for electrostatic charges on the sample and laboratory accessories. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Motic B1-253ASC LED Binocular Compound Microscope Magnification Range 4x to 100x Optical System Fini (more)te, 160mm Illumination 3W LED Features - For basic work in biology and medicine - View sections, smears, and other transparent samples - Trinocular head - Achromatic Super Contrast - 3W LED Illumination - Robust and sturdy base - Phase contrast, Dark field, and Polarization accessories optionally available - Coarse focusing system with tension adjustment - Switching power supply for use worldwide (100-240V) Superior in design and in performance, the B1 Series incorporates a wide range of features designed for university and laboratory use. Superb optical clarity and reliable mechanical engineering assures years of top performance. Choose from two grades of objectives: Standard Achromatic lenses deliver excellent clarity and normal flatness of field, while the ASC Achromatic Super Contrast objectives deliver extra contrast to the image. Combined with precision coaxial coarse and fine focusing adjustments, the B1 models are exceptionally high quality microscopes available within a tight budget. The B1 series also comes equipped with a new rack-less stage, which allows the microscope to be used in different current and future tenders. In order to provide enough light to Brightfield, Phase Contrast as well as Darkfield applications, the illumination has been changed to Motic’s powerful true 3W LED keeping the system cool as well as properly illuminated with steady color-temperature. INCLUDED: The Motic B1-253ASC LED Binocular Compound Microscope includes: - Trinocular head inclined 45º and 360º rotating - Widefield eyepieces WF10X / 18mm - Quadruple nosepiece - Achromatic Super Contrast Objectives: ASC 4X, 10X, 40X S, 100X S-Oil - Built in low position coaxial Rackless mechanical stage - Focusable 1.25 N.A. Abbe condenser - Iris diaphragm with filter holder - LED illumination 3W with intensity control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Speed: 100 – 1250 rpm Diameter stirring surface: 140 mm Dimensions (DxHxW): 240 x 130 x 150 mm