Amersham Biosciences TE 77 PWR Lab

SANDVIK Coromant CoroChuck 930 This was removed from a university lab where it was surplus to requi (more)rements. The unit is in good cosmetic condition.

Summa D60R Optical Guided Vinyl Cutter This item was removed from a university where it was surplus  (more)to requirements. The unit is in very good cosmetic condition and was described by the previous owner as being in working condition.We are unable to test it fully at our facility. Please note: this item does not include a stand Specifications: - Serial No.: 651105-10008 - Max Working Width: 600mm - Max Working Length: 50 metres - Material Thickness: 0.05 to 0.25mm (up to 0.8mm with optional sandblast knife) Included: - Data cable

Base adjustable in height by THERMO SCIENTIFIC electrical control, width 120cm New equipment in its  (more)original packaging For use with the Heraguard ECO 1.2 model (1.2m wide hood) Description: ECO working height from 760 mm to 960 mm with three heights stored in memory Product type: Base adjustable in height by electrical control Total height (metric): 680 to 880 mm Colors: Black and White/Gray Delivered disassembled, to be assembled

Amersham Biosciences TE 77 PWR This item was removed from a university lab where it was surplus to r (more)equirements. It is in good cosmetic condition and powers on. The power supply is included. Model: TE 77 PWRSerial No.: 20137585

Pair of Horizon Collators MC-8 MC-8a and MC-8m These were removed from a university lab where they w (more)ere surplus to requirements. Bot units are in reasonably good cosmetic condition and power on, but due to sustained damage, they are not fully operable and therefore, listed as Spares/Repair. The damage sustained is as follows: Part 1:The front intake has completely broken off, with the back tray significantly buckled. Part 2:The rear of the device has sustained severe damage or deformation as a result of mishandling or being dropped. The plugs have since been removed after testing the 32AMP.

Teledyne Cetac Technologies MVX-7100 µL Workstation This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in good cosmetic condition with minor marks. The lab confirmed it was in full working order. Comes with USB, Ethernet and Coms cables along with its own power supply.

Manufacturer: Thermo Scientific Model: NanoDrop™ One/OneC Description: With the Thermo Scientific™ N (more)anoDrop™ One microvolume UV/VIS spectrophotometer, you can gain a more informed understanding of sample quality, preventing costly delays. Innovative Thermo Scientific™ Acclaro™ Sample Intelligence technology is built into each instrument for increased accuracy and better contaminant identification. Quantify and determine DNA, RNA, and protein samples in seconds with as little as 1 to 2 µl of sample. Obtain data from the entire specimen before deciding which samples to use in downstream applications. An additional cuvette position is also available. Core features: - User-friendly software provides the ability to set user-defined methods and export data - Wide spectral range (190 to 850 nm) for measuring a variety of sample types:   - Peptides (205 nm)   - DNA and RNA (260 nm)   - Purified proteins (280 nm)   - Toxicology assays and industrial dyes (490 nm)   - Gold nanoparticles (520 nm)   - Colorimetric protein assays (BCA 562 nm, Bradford 595 nm, Modified Lowry 650 nm, Pierce 660 660 nm)   - Optical density measurement (600 nm) - Measurement of low and high concentrations (2.0 to 27,500 ng/µl dsDNA and 0.06 to 820 mg/ml BSA) by combining   of the patented** sample retention system with the possibility to use cuvettes. - Preset methods for DNA, protein A280, microarray, proteins and labels, Pierce 660, Bradford, BCA, and Lowry. - User-friendly software provides the ability to set user-defined methods and export data   Technical data: Concentration: dsDNA: Pedestal: 27,500 ng/μL - BSA (IgG): Pedestal: 820 (400) mg/mL. Detector type: 2048-element CMOS Linear Image Sensor Dimensions: (L x W x H) 20 x 25.4 x 32.3 cm Languages:         English, French, German, Spanish, Polish, Chinese, Japanese, Korean Light source: xenon flash Spectrum bandwidth: ≤1.8 nm (FWHM at Hg 254 nm). Voltage: 12 VDC Wavelength Range: 190 to 850 nm Measurement time: 8 seconds Power consumption: Operating: 12 to 18 W; Standby: 5 W Sample temperature: Temperature Control (cuvette only) 37 °C Scope of delivery: - NanoDrop™ One/OneC incl. computer and pre-installed Nanodrop software - power cable - Instruction manual as PDF via e-mail The spectrophotometer is in absolute top condition and has been 100% tested for function.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

High model (2 available) Dimensions (H x W x D): 650 x 1125 x 500 mm Internal dimensions (H x W x D) (more): 445 x 1090 x 460 mm Low Model (2 available) Dimensions (H x W x D): 500 x 1125 x 500 mm Internal dimensions (H x W x D): 295 x 1090 x 460 mm

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Bransonic accessories are designed to maximize theeffectiveness of your Bransonic baths. It is impor (more)tant that parts do not reston the bottom of the bath, as it can inhibit the ultrasonic activity andpossibly damage the unit. A variety of perforated trays, mesh baskets, beakers,and support racks give you the option of direct or indirect cleaning. All fivemodels come with covers to allow the cleaning bath to heat up more quickly. Direct Cleaning Method - Suspends parts using a perforated tray, mesh basket, or a support rack. - Permits sound waves to penetrate directly to the parts. Indirect Cleaning Method - Suspends parts using a solid tray, or beakers with a beaker cover. - Ideal for cleaning small parts. - Discarded soil cleans easily from a beaker or solid tray. - Indirect method is ideal for sample preparation. Perforated trays, solid insert trays, and wire mesh basketshave built-in handles specially designed to prevent accessories from touchingthe tank bottom. Support racks allow total volume of the tank to be used whilekeeping parts, fixtures, or containers about 1/2" above the tank bottom. Supportracks also are useful as countertop drain racks, holding parts above thecountertop surface. For 2800 Series Ultrasonic Cleaner 0.75 Gallon.