Radwag HRP 1000.5Y.KO Mass Comparator

IN/OUT cable (PUE C41H, PUE HY10, PUE 5.15, PUE 5.19). Cable types: Standard P0256.2: 2 m Customized (more) P0256.5 (extra charge): 5 m Customized P0256.10 (extra charge): 10 m Compatible with: Scales operated via PUE C41H terminal Scales operated via PUE HY10 terminal Scales operated via PUE 5.15 terminal Scales operated via PUE 5.19 terminal PUE C41H terminal PUE HY10 terminal PUE 5.15 terminal PUE 5.19 terminal HRP platform MWSH weighing module MWLH weighing module

RADWAG-manufactured AVK-1000 automatic vacuum mass comparator is intended for national metrological  (more)institutes that transfer and maintain the national reference mass standard of 1 kg. The comparator is intended for weighing mass standards and silicone spheres of 100 mm diameter. It enables comparison of up to 6 prototypes of max 1kg mass. The repeatability of the process is of 0.3 µg and readability of d = 0.1 µg. A specially designed vacuum chamber enables carrying out measurements in a vacuum of 10-6 mbar capacity or in atmosphere containing noble gases. AVK-1000 is equipped with suspended weighing pan that eliminates eccentricity errors. Standard version of the mass comparator features thermo-hygro-barometer for testing ambient conditions with great accuracy: pressure of 0.001hPa, humidity of 0.01% and temperature of 0.001 °C. The comparator is also equipped with high quality vacuum gauge. The AVK-1000 vacuum mass comparator can be equipped with the LOAD LOCK system for carrying mass standards. The system enables switching or adding artefacts without changing the atmosphere inside the main chamber. With the use of a special chamber for mass standards switching the whole process is 90% shorter. During mass standards replacement carried out without the use of the LOAD LOCK system, the air enters the main chamber of the mass comparator. After each opening of the chamber it is necessary to pump the air out in order to obtain required vacuum value. The vacuum mass comparator needs approx. 48 hours in order to obtain vacuum that ensures measurement repeatability. The LOAD LOCK is equipped with a high-efficiency pump system, the time of pumping the air out in order to enable opening of the valve of the main chamber is significantly shortened. The stabilization of the main chamber after replacing/adding the mass standard and closing the valve connecting the main chamber and the LOAD LOCK system takes 5 hours. The high-quality vacuum gauges enable monitoring and comparing the vacuum value in order to determine the moment when opening the valve again and replacing the mass standard is available. A specially designed viewfinder enables monitoring of the process. The LOAD LOCK enables switching objects of dimensions adapted to the AVK-1000 mass comparator: cylindrical mass standards of 22-95 mm diameter and silicone spheres of 40-100 mm diameter. Supplementing the AVK-1000 vacuum mass comparator with LOAD LOCK system significantly improves the comparison performance.

Mass comparators of UMA 100 series stand for the highest standard of professional automatic mass com (more)parators. They provide comparison of 1 g – 100 g weights of E1 and lower classes. The device is equipped with 36 magazine positions allowing to deposit up to 36 weights. This solution allows to perform either comparison for complete set of weights carried out within one process or comparison for just a few weights of the same mass. Owing to elimination of human factor and with temperature changes and air drafts reduced to zero, UMA automatic mass comparators provide the highest possible measurement repeatability.

THB sensor THB sensor is a device measuring ambient conditions, it cooperates with: a computer (1 se (more)nsor via USB 2.0 port); direct cooperation, a weighing device (1 sensor via USB 2.0 port); direct cooperation, a THBR Box (up to 4 sensors connected to THBR Box via USB 2.0 port). The THB sensor is designed to measure parameters such as temperature, humidity, pressure, air density and vibrations level. Sensor registers level of permissible vibrations at the workstation, wherein the values of vibrations level are displayed within 0 - 100% range versus reference values in laboratory conditions. Values exceeding 100% threshold inform about potential occurrence of error greater than permissible error of mass measurement performed using weighing device. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application. On the basis of sent measurements, the THB Single or THB Multi software determines air temperature, humidity, pressure, density and permissible vibrations factor.

RADWAG-manufactured susceptometer enables carrying out measurements of magnetic susceptibility and m (more)agnetization of weights of E1 and lower classes in accordance with OIML R111. Modular design, upon disassembling respective module, enables using the susceptometer as a mass comparator or a balance. Compared to the previous model, the new one features option of internal adjustment and higher readability: [d] 0.1 μg for loads ranging from 2 g to 50 kg.

Self-centering weighing pan of a floating nature is intended for APP KO comparator. It is used inter (more)changeably with a standard weighing pan. The “floating” weighing pan is installed in course of a manufacturing process therefore remember to order it when purchasing the APP KO comparator as it is not sold separately. The pan has been designed to aid the operator stabilize and level weights that are located eccentrically. Additionally it helps to place eccentrically group of weights, total mass of which equals reference weight mass. The pan surface is covered with cork featuring marks that determine position of particular weights.

CABINET CS 120 BASIC PLUS GLASS - CHEMISAFE - Completely made of 10/10 mm thick electrogalvanized st (more)eel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - One piece construction with adjustable leveling feet - Possibility of having 1, 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged or double layer doors - Lock and key - Door opening at an angle of 110° which allows the shelves to be pulled out without tilting them - Equipped with fixed or sliding retention shelves in plasticized/painted/stainless steel, with adjustable height - Possibility of having a retention tray on the bottom of the cabinet (see table alongside) - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards - Compliance with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3+3 shelves in plasticized steel (max load 40 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Selecta Mediclave 12 benchtop autoclave. Indicated for the sterilization of solids and liquids. Capa (more)city 12 liters. Steam sterilization. Temperature range from 121 to 134ºC; pressure 1 to 2 bar; automatic air evacuation, devaporization valve and safety thermostat. Stainless steel. Includes basket with diameter 22.5 cm and height 24 cm. Exterior dimensions (LFA): 50*35*80 cm: 18 kg. User manual. The JP Selecta Mediclave autoclave is a high quality and reliable sterilization equipment. Designed for use in laboratories and medical centers, this autoclave has a capacity of 12 liters and a maximum sterilization temperature of 134 degrees Celsius. With its intuitive and easy-to-use control panel, this autoclave offers a wide range of sterilization programs to suit different needs. In addition, its security system guarantees safe and efficient operation. With the JP Selecta Mediclave autoclave, you can be sure of accurate and consistent sterilization results.

M1 Mass Standard - knob weights. Nominal value - 250 kg.

Motic LUMOS Fluorescence LED High Powered Light Source Objectives Optional Optical System Spectrums (more) ranging from NUV to visible to NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Features apochromatic design - Compared to the lifespan of only 200 hours and the high cost of mercury-arc lamps, the LUMOS FL provides over 20,000 hours of use - No light toxicity like traditional mercury-arc lamps which can damage samples with infrared light heat toxicity - Instant On/Off: Unlike traditional mercury-arc lamps which take up to 20 minutes to reach optimal brightness levels when turned on, the LUMOS FL is ready for use at the flip of a switch - Dose not pose toxic gas danger to users - Avoids stray light interference during observation, helping to avoid errors in user interpretation of images - Individually controls each LED channel and eliminates need for multiple filters therefore reducing filter cube expense - Features a broad spectrum spread which can satisfy multiple user applications Do more with your Motic microscope setup with the cutting-edge Motic LUMOS Fluorescence LED High Powered Light Source. With this high-performance plug and play illuminator device, you will obtain stunning multi-channel images that can be seamlessly overlaid using our intuitive imaging software. Featuring UV, blue and green color LED channels, with ultra-accurate wavelengths and contrast provided by its black background, this accessory yields sharp images without the need for constant bulb changes or an alignment. INCLUDED: The Motic LUMOS Fluorescence LED High Powered Light Source includes: - Control Box - DC Power Supply - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Boekel Scientific 260250 Orbitron Rotator II, 115V The Boekel Scientific Orbitron II Laboratory Mixe (more)r, adjustable speed nutating mixer, is excellent for any application requiring a gentle, low foaming lab agitation. The unit has adjustable speed and is supplied with one white, non-slip dimpled mat and one white, non-slip fat mat. Features: Pad is removable for easy cleaning and test tube transport Gentle, low foaming agitation Adjustable speed from 6 to 23 orbits per minute Small footprint Thin power cord easily passes through incubator door gaskets Rugged steel platform has notches for bungee cords if necessary Fixed position platform Supplied two mats, one dimpled and one flat, and a 12 x 12 tray Can be used in incubator or cold room INCLUDED: The Boekel Scientific 260250 Orbitron Rotator II, 115V includes: - 12 x 12 Tray with Dimpled Mat and Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty