Watson Marlow 620U/L 265rpm Peristaltik Pumpe Peristaltic Pump IP31

GILSON MiniPuls 3 Peristaltic Pump M312 2 Channels Voltage: 220-240V, 50/60Hz Power: 45VA Speed: 0-4 (more)8 rpm Standard Flow Rate: 0.3 µL/min – 30 mL/min at 0.5 MPa max pressure High Flow Rate: 1 mL/min – 220 mL/min at 0.3 MPa max pressure Pump Head Speed: Adjustable 0 to 48 rpm with 0.01 rpm increments at 9.99 rpm and 0.1 rpm increments at 10 rpm Standard Model Tubing Diameter: 0.25–4 mm (ID) High Flow Tubing Diameter: 2–8 mm (ID) External Dimensions (W) x (D) x (H): 15 x 17.5 x 29.5 cm

Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable Standard Flow Peristaltic Pump HeadFeatures - Util (more)izes positive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds the Minipuls 3 is exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable Standard Flow Peristaltic Pump Head includes: - Selected Standard Flow Peristaltic Pump Head - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump Head, R2 Two Channel The Gilson MINIPULS 3 Peristaltic Pump Head, (more) R2 Two Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R2 Two Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Sensor: CMOS 1/2.3 inch Pixels: 4912 x 3684 pixels, 18.0 Mpix Scan mode: Pixel size: 1.25 μm x 1.25  (more)μm Colour filter: RGB Mounting: C-mount Image frequntion: – up to 6 shots per second (4912 x 3684 pixels) – up to 18 shots per second (2546 x 1842 pixels) – up to 32 shots per second (1228 x 922 pixels) Exposure: Automatic or manual White balance: Automatic/manual Dynamic range: 65 db S/N max: 42 db Data interface: USB 3.0 high speed 80 Mb/s Operating conditions: 0 – 50° C, 30-80 % humidity Storage temperature: -20 to 60° Celsius Power supply: 5V via PC USB port Housing: Zinc-aluminium alloy, 68 x 68 x 45 mm Supplied with: – 0.5x objective lens with C-ring – USB 3 cable – 30 and 30.5 mm to 23.2 mm tube adapters for stereo microscopes – 76 x 24 mm calibration slide (1mm/100) – CD ROM with ImageFocus Alpha software – cardboard box Software: Supplied with ImageFocus Alpha analysis software. Suitable for Windows 7, Windows 8 (32 and 64 bit configurations) System requirements: Intel Core 2, 2.8 GHZ or higher, 2 GB, USB-3

2 pair banana jack sockets Voltage: 0 – 8 V Amperage: 6.3 A

This Schutt Homgen Type 3.200 011 Homogeniser was removed from a university lab where it was surplus (more) to requirements. The unit powers up and the chuck turns but there is no tool attached. It is in good working order. It is in reasonable cosmetic condition but has some marks and rust from age.

Tecan Freedom EVO-2 100 Base Software This was removed from a university lab where it was surplus to (more) requirements. Contains the following:Tecan Instrument Software Version 6.1 SP1Operating Manual Freedom EVOSwiss Tools PB 6205: 0.71 x 40Swiss Tools PB 140/2 : 0.6 x 4 x 40Mini flat head screw driverAllen key tool