INDENTEC Hardness Testing Machine Model- 5030 SKV Lab

ESEWAY Hardness Tester SPV2P This item was removed from a university where it was surplus to require (more)ment. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Vickers-Armstrong Pedestal Hardness Tester This was removed from a university lab where it was surpl (more)us to requirements. The unit is in reasonably good cosmetic condition with marks from use. The system is mechanically sound, but we were told by the lab that the diamond might be damaged. We have been unable to confirm or deny this.

INDENTEC Hardness Testing Machine Lab This item was removed from a university where it was surplus t (more)o requirement. It is in good cosmetic condition and powers on, however it displays the following error: Check Lead which prevents further use. It is listed as Spares/Repair. Also included: Calibration Certificate User Manual Optic Head

Sheen Wet Abrasion Scrub Tester Model - 903 Lab This item was removed from a university where it was (more) surplus to requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

INDENTEC Hardness Testing Machine Model- 5030SKV Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Capacity: 96 tubes 0.2 ml, 96 well microplates Block: Silver Block coating: Gold Max Heating Rate: 6 (more).0°C/sec Max Cooling Rate: 4.0°C/sec Avg Heating Rate: 5.5°C/sec Avg Cooling Rate: 3.5°C/sec Temperature Uniformity at 95°C: ± 0.50°C after 15 s Temperature Uniformity at 70°C: ± 0.25 °C after 15 s Temperature Uniformity at 55°C: ± 0.15 °C after 15 s Gradient Temperature Range: 3°C to 99°C Temperature Range: 3°C to 99°C Control Accuracy: ± 0.1°C Lid Temperature Range: 30°C to 110°C Dimensions (WxDxH): 277 x 457 x 264 mm Weight: 15 kg

Pharmacia BIAcore Processing Unit Surface Plasmon Resonance System This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Pharmacia Thermo Block A.Pharmacia Thermo Block B.Pharmacia Thermo Block C.BIAcore upgrade kit.BIAcore software July 2021.BIAcore Advisor Tutorial.BIAcore Advisor Kinetics.BIAcore Preventive Maintenance Kit 4.BIAlogue Software set:BIAcore 1000 Control Software version 1.3 Disc 1 to 3BIAlogue System Specific Data.BIAapplications Handbook.BIAcore Upgrade Instrument Handbook.BIAevaluation 2.1 Software Handbook.BIAcore Getting Started 2000 Hand Book.BIAtechnology Handbook.BIAcore Qflex Kit Vitamin B12 Handbook.BIAcore Quant Biotin Kit Users Guide.BIAcore Quant Folic Acid Kit Users Guide.BIAcore Sensor Surface Hand Book.

Memmert IN110plus Natural Convection Incubator 108L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20 to +80°C with a working range at least 5°C above ambient - Internal volume of 108 L (3.8 cu.ft.) for versatile applications - Precise temperature control with 0.1°C setting resolution using 2 Pt100 sensors DIN Class A in a 4-wire circuit - ControlCOCKPIT with TwinDISPLAY offers advanced PID-microprocessor control and two high-definition TFT-color displays - Natural convection with adjustable pre-heated fresh air admixture through electronically controlled air flap - Digital timer with backwards counting, adjustable from 1 minute to 99 days - Two stainless steel, electropolished grids, with a max chamber load of 385 lbs (175 kg) - AtmoCONTROL software for data logging and program management via USB or Ethernet interface The Memmert IN110plus Natural Convection Incubator 108L, 115V offers precision and reliability for a wide range of temperature-sensitive applications. With a spacious 108 L (3.8 cu.ft.) stainless steel chamber, this incubator is designed for natural convection heating, ensuring consistent and uniform temperature distribution throughout the chamber. Its advanced ControlCOCKPIT system with TwinDISPLAY and high-definition TFT-color screens allows for easy adjustments of temperature, air flap position, and timer settings. The temperature range spans from +20 to +80°C with an impressive 0.1°C resolution, delivering exceptional control and stability, aided by two Pt100 sensors in a 4-wire circuit that monitor temperature with accuracy. This incubator also features a digital timer adjustable from 1 minute to 99 days, making it ideal for long-duration experiments. It includes AtmoCONTROL software, providing seamless data logging and program management via USB or Ethernet interfaces. The interior is designed for ease of cleaning and durability, with two stainless steel grids capable of supporting up to 385 lbs. Safety is paramount with integrated overtemperature protection and an autodiagnostic system that alerts users visually and audibly in case of any issues. INCLUDED: TheMemmert IN110plus Natural Convection Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

IKA Eurostar 20 High Speed Control Overhead Stirrer Stirring quantity max. per stirring position ( (more)H2O) 20 l Deviation of speed measurement n 300rpm 1 ±% Temperature Measuring Range -10 - +350 °C Features - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display - H 67.60 temperature sensor and WH 11 WiCo holder included in delivery High speed laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/150 - 6000 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters, and an update of the current firmware. An integrated torque trend display is provided for the measurement of viscosity changes. The included precision stirrer shaft is 280 mm long and has a maximum immersion depth of 220 mm. INCLUDED: The IKA Eurostar 20 High Speed Control Overhead Stirrer includes: - EUROSTAR 20 high speed control - R 6000 precision shaft - Open-end wrench - Hook spanner - H 67.60 Temperature sensor, stainless steel - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB cable micro A – micro B 2.0 - Screw driver - Protective cover for WiCo contact - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 20 High Speed Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)20 lMotor rating input176 WMotor rating output125 WMotor principleBrushless DCSpeed displayTFTSpeed range0/150 - 6000 rpmIntermittent operationyes Viscosity max.10000 mPas Output max. at stirring shaft125 W Permissible ON time100 %Torque max. at stirring shaft20 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningspecial output shaftConnection for ext. temperature sensorPT1000Temperature displayyesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmTorque displayyesNominal torque0.2 NmTorque measurementtrendDeviation of torque measurement I6 ±NcmTimeryesTimer displayTFTTime setting range1 - 6000 minTemperature measuring range-10 - +350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)86 x 325 x 230 mmWeight5.242 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 40RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input176 WComparison of IKA Eurostar Control Overhead StirrersSpecsEurostar 20Eurostar 60Eurostar 100Eurostar 200Eurostar 400Stirring quantity max. per stirring position (H2O)20 l40 l100 l100 l150 lSpeed range0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity max.10000 mPas50000 mPas70000 mPas100000 mPas100000 mPasTorque max. at stirring shaft20 Ncm60 Ncm100 Ncm200 Ncm400 NcmPower input176 W176 W186 W130 W226 WSetting accuracy speed1 ±rpm1 ±rpm1 ±rpm1 ±rpm1 ±rpm.comparison-table tr td:nth-child(2) { background-color: #fffacd;}