Heraeus B6120 F 150°C Single STW 150 brennbare Lösungsmittel Flammable Solvents

LAUDA LOOP: Compact circulation thermostat for constant temperature applications from 4° to 80°C Ove (more)r a two-year period of intensive research and development, LAUDA has reinvented Peltier technology. Based on this proven technology, LAUDA LOOP, a new type of unrivaled thermoelectric circulation thermostat, has been developed. The positive response from industry customers confirms that the design of a location-independent, space-saving and environmentally friendly temperature control meets the growing demands of modern work processes in terms of flexibility, independence and versatility. A practical, lightweight tool with a smart design for all types of applications. The two versions: LOOP 100 and LOOP 250 The two types of air-cooled devices, L 100 and L 250, provide cooling capacities of 120 and 250 Watts and a heating power of 0.2 and 0.4 Kw. The focus is on applications that require a constant temperature with low energy consumption. Both types of devices are exceptionally efficient in part load operation. Notable features - Small size, low weight - Thermostating with temperature control without refrigerants thanks to Peltier technology - Electrically adjustable fan - Exceptionally energy efficient in part load operation - 3 button control with OLED display - Voltage: 100-240V, 50 / 60Hz - RS 232 interface as standard - Very quiet and barely perceptible vibrations - Under / over temperature alarms Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections. Simple control panel with large TFT display with extensive information; easy to navigate and change settings. Tank cover elegantly hidden and protected in the structure of the instrument. Serial connection on the back: RS232; pump outlet and inlet connections. Chart of the LOOP LAUDA pump characteristics and the two LOOP LAUDA models available. 1 - Controller with temperature display and control buttons (soft buttons) 2 - Cover over the tank lid 3 - Ventilation openings 4 - 4 feet 1 - Ventilator fan on the underside. - The device sucks up fresh air from below! a. - Tank with filler nozzle and cover 1 - Pump connection IN inlet (back from consumer) 2 - Pump connection OUT outflow (to consumer) 3 - RS 232 interface (socket) 4 - Device panel plug 5 - Box for 2 safety fuses 6 - Mains switch 7 - Rating label

ECO G Lauda Series - Refrigerated Thermo-Cryostats LAUDA ECO G cryostats offer reliable technology a (more)nd modern design for temperature ranges from -50°C to 200°C depending on the models. Microprocessor management and integrated cooling system. Gold control heating head (TFT color graphic display and graphic illustration of temperature profiles), with 5 programs and 150 segments each, equipped with mini USB interface. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Examples of specific applications - Sample preparation in chemistry and pharmacy - Functional tests of electronic components - Bearing tests - Beer forcing test - Valve tests - Stress tests - Bending test - Expansion test - Semiconductors Notable features - PID microprocessor management - TFT graphic display with graphic representation of temperature profiles - Alphanumeric navigation menu - Overtemperature protection - Protection class III for operation also with flammable liquids - Pump adjustable to 6 levels - Front adjustment of the external/internal pump power without removing the control unit - USB interface - Possibility to upgrade with various interfaces - Possibility of upgrading with Pt100/LiBus for external control via console - Programmer with 150 segments for 5 programs - Integrated programmer with up to 20 segments - Standard pump connectors - Steel tub - Drain tap Graph of cooling performance of ECO Gold LAUDA cryostats. Performance graph of the pump pressing on the six levels.

BECKMAN COULTER 70.1 Ti Titanium Angle Rotor Fixed Angle Rotor Max: 70,000 rpm, 450,000 x g Capacity (more): 12 x 13.5 mL Nominal Capacity: 162 mL K-Factor: 36 Angle: 24º Maximum Tube Length: 76 mm Maximum Tube Diameter: 16 mm For use with H, R, S centrifuges

B.O.B Stevenson Type 355 BI/J Centrifugal Fume Extraction Fan This item was removed from a universit (more)y where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility. The unit has no cabling and is sold for spares/repairs

Traceable Large Digit, Triple-Display Thermometer VWR 620-1584 For Refrigerator/Freezer laboratory V (more)WR reference : 620-1584 Range : -50°C at +70°C Resolution : 0,1°C Accuracy : ±1 °C W×D×H : 99x111×22 mm Bottle probe (glycol) The last calibration dates from 2014

Buchi Distillation Chiller B-741 This was removed from a university lab where it was surplus to req (more)uirements. The unit did not power up in tested and we were informed that it was out of order and non-function prior to collecting it. It is sold for spares/repairs

FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab This was removed from a u (more)niversity lab where it was surplus to requirements. The system is in good cosmetic condition and is made up of the following units; 1x FluidX X-Seal AAS Automated Adhesive SealerS/N: 1407 This item is in very good cosmetic condition and powered on without issue - The item carried out all of its self-checks successfully on start-up - it was hooked up to the compressor, and carried out one sealing run, performing as intended. Bambi VT75 CompressorS/N: VT75-01229 52x42x61 cm28.08 Kg This item is in excellent condition (looking almost brand new), powered on without issue, and works as intended - tested to 120 psi. 1x SMC compressor regulator (with connecting tubes)P/N: AW10-M5 2x Compressor connecting tubes 4x Rubber grommets 1x Roll of Clear Adhesive SealP/N: 43-1031 2x Spare Rollers 1x Connection Valve 1x RS232 cable

Thermo Scientific Thermo 10 Liquid Nitrogen Transfer Vessel. Designed for storing and dispensing sma (more)ll quantities of liquid nitrogen. 10 L capacity. Static evaporation rate 0.18 L/day. Inner neck diameter 5.6 cm. Outer height 54.6 mm. Diameter 26.2 cm. Weight 5.9 kg. Discover the Thermo Scientific Thermo 10 Liquid Nitrogen Transfer Container at Galileo Equipment! Designed to safely and efficiently store and transfer liquid nitrogen, this high-quality, overhauled equipment offers excellent value for money. Its robust and reliable design ensures optimal preservation and handling of liquid nitrogen, guaranteeing long-lasting performance. Ideal for maximizing safety and efficiency in laboratory processes, the Thermo 10 is a smart investment. Visit our website and get yours today at Galileo Equipment!

F1 class standard: knob weight Nominal value: 20 kg Material: stainless steel Knob weight is excepti (more)onal measuring tool that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, it is perfect for advanced applications where every detail of measurement is of paramount importance.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database