IKA S10N-10G Dispersing Tool Dispergierwerkzeug T25 Ultra Turrax 0003370100

BENCHMARK D1000-E Homogenizer, Includes 5mm and 7mm Generators Brand new in original packaging Part  (more)number: D1000 E With 5mm and 7mm generators (ideal for microtubes) For volumes from 100µl to 250ml Speed ​​range: 8500 to 30000rpm Capacity: 0.1 to 250ml Noise level: <70dB Operating temp. Range: +4° to 65°C Dimensions: 1.9 x 2.3 x 9 in / 4.5 x 5.8 x 22.5 cm Weight: 1.35 lb / 0.62 kg Electrical: 230V 50Hz

Scilogex D500 Homogenizer Drive MotorClick Here to View Product Video INCLUDED: The Scilogex D500 Ho (more)mogenizer Drive Motor includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex D160 Homogenizer Package - Drive Motor DS-160/10 The Scilogex D160 Homogenizer can rapidly  (more)homogenize, disperse, and emulsify samples from 0.1-250ml solids or liquid media depending on the generating probe. During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 30,000rpm. The material is repeatedly cycled through narrow slits in the probe where it is rapidly sheared and disintegrated by high shear. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in a few seconds. Little, if any, heat is produced during the process. Package includes: Drive motor- DS-160/10, 10mm diameter generator, flat head open slot, 115mm immerse length, H-370 stand. INCLUDED: The Scilogex D160 Homogenizer Package - Drive Motor DS-160/10 includes: - H-370 Stand - D160 Drive Motor - 10mm Dia. Generator Probe - 115mm Generator Shaft - Holding Clamp - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark D1000 Homogenizer with 5mm and 7mm Generators Benchmark’s new handheld homogenizer, the D1 (more)000, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes, the homogenizer works well with samples from 0.1ml to 250ml (depending upon the generator probe used). The D1000 is a rotor stator homogenizer, and works by drawing the sample, in liquid, into the generator probe with the variable speed rotor, and then forcing it out through the slots in the stator. This achieves mechanical shearing of the sample. As the sample is repeatedly drawn up and forced through the stator, additional shearing takes place. Most samples are completely homogenized in 30 seconds are less. A powerful, 130W motor drives the rotor at speeds from 8,500 to 30,000 rpm. Speed is adjustable in six steps to meet sample processing needs. A separate on/off switch allows the homogenizer to be left at the appropriate setting. Generator probes are available in four sizes. The 5mm and 7mm diameter have a 50mm length for use with samples in microbtubes. The 10mm x 115mm is ideal for use with 15 and 50ml tubes and 14mm x 130 mm, for 50ml tubes and vessels up to 250ml. The unit is supplied with one each of the 5mm and 7mm generator probes. All the generator probes are made of stainless steel and can be sterilized by autoclaving. INCLUDED: The Benchmark D1000 Homogenizer with 5mm and 7mm Generators includes: - 5 &amp; 7mm Generator Probes - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The SpeedMill PLUS is a highly efficient homogenization system for various starting materials used f (more)or the subsequent isolation and purification of DNA, RNA or proteins. This new process allows users to operate the SpeedMill PLUS continuously if necessary. The high efficiency of energy input into the sample, based on a vertical movement, procures a homogeneous disruption of the sample without destroying the target molecules. Homogenization time: 30 sec to 4 min (depending on the starting material) Programmable homogenization step: 1 sec to 4:59 min Number of cycles: 1 – 99 Protocol steps: 1 – 6 Storable protocols: 20 Sample cooling: Passive cooled sample holder storage at temperatures down to -80°C

The BeadBug is a high energy benchtop homogenizer that sets the performance standard for personal si (more)zed cell disruption and lysis instruments. Simultaneous homogenization of up to 3 samples takes place (often within 45 seconds) inside the disposable 2 mL screw cap microtubes. The optimized mixing motion causes rapid cell disruption through constant high velocity impact from the hardened micro-beads chosen specifically for your sample type. With up to three tube capacity and a foot print of just 17 x 21 cm, the BeadBug is the ideal homogenizing instrument for low to medium throughput laboratories. Timer: 3 sec to 3 min. Capacity: 3 x 2.0 mL tubes Speed: 2700-4000 rpm PCR: suitable Dimenisions (WxLxH): 170 x 210 x 135 mm Weight: 2.2 kg

AREC 10 Digital was designed for laboratory applications where a comfortable and large work surface  (more)is required, which here reaches 26x26 cm in size, the largest among the Velp series. The plate offers high resistance to acids, bases and solvents, while the technopolymer structure of the stirrer is designed to prevent accidental spills of liquids from reaching the electronic components, ensuring easy and quick cleaning. This translates into product safety and durability even in the most demanding laboratories; further protected by a 3-year warranty (subject to online registration). The heating uses the latest technologies available and ensures a uniform temperature across the entire plate and exceptional transfer efficiency. Same quality for agitation: SpeedServo™ technology and brushless motor offer precise and powerful agitation even when viscosity varies. In short, why we offer you AREC 10 Digital: - Easy to use and highly resistant to chemicals - Precise setting of temperature and agitation - Accepts volumes up to 25 liters / 30 kg - Possibility of precise thermoregulation of the fluid with Pt100/Pt1000 and VTF probes - Designed for durability and guaranteed for 3 years The powerful brushless motor of the AREC 10 Digital ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The always precise stirring speed, from chemical reactions to sample preparation, adjustable from 100 to 1500 rpm, it is ideal for any laboratory need. With a stirring capacity of up to 25 liters (H2O) (or 30 kg of liquid), the AREC 10 Digital stands out for its robustness and superior performance. Arec 10 reaches the remarkable temperature of +550°C in complete safety and control. Extremely precise, you can increase the temperature by +1.0°C. By connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample up to 350°C with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C (up to a maximum of 300°C). In this regard, Arec 10 is available with different accessory packages. You will find all the combinations at the bottom. Safety during rescaling: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm above 570°C 1 - Aluminum heating plate with ceramic coating 2 - Main switch 3 - Knob for stirring setting 4 - Knob for temperature setting 5 - Display

Scilogex MS-H280-Pro Circular LED Digital Hotplate-StirrerThe new MS-H280 hotplate-stirrer is a very (more) economically priced LED digital hotplate-stirrer ideal for temperatures below 280C. This compact unit can be used as a hotplate, stirrer or combination. MS-H280-Pro features heat only, stir only or heat and stir together functions, easy to read LED display, with independent heat and stir display, ceramic plate for chemical resistance and easy clean, electronic speed control for constant speed even during changes in load. Click Here to View Product Video INCLUDED: The Scilogex MS-H280-Pro Circular LED Digital Hotplate-Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Matrix Orbital Thermoshaker Features - Speeds of up to 3,000 RPM and shaker diameter of 3 mm to  (more)ensure liquid mixes quickly and effectively - Two different speed modes for optimal mixing - Speed adjustment according to insert, attachment, and filling volume - Features RS 232 and USB interfaces - Aluminum die cast housing ensures secure positioning, excellent stability, and everyday robustness Large and clear digital display with a convenient menu structure allowing for intuitive operation Includes variable inserts for 0.2 ml PCR tubes, 0.5 ml tubes, and 1.5/2.0 ml tubes All IKA Thermoshakers include a IKA Pette Vario 100-1000µl to ehance sample preparation before mixing The IKA Matrix Orbital is part of a new and powerful product family of thermoshakers available. IKA Matrix Orbital mixes and is suitable for variable inserts. Whether its blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays – samples with even the smallest volumes mix reliably and completely in all laboratory applications. No cross-contamination and an optimal mixing result. Click Here to View Product Video INCLUDED: The IKA Matrix Orbital Thermoshaker includes: - MATRIX Orbital - PCR insert - 1.5/2.0 ml insert - 0.5 ml insert - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Orbital Thermoshaker Specifications Type of movementorbitalShaking stroke3 mmMaximun load0.3 kgPermissible ON time100 %Speed min (adjustable)300 rpmSpeed range0 - 3000 rpmSpeed displayTFTSpeed deviation30 ±rpmSpeed control10 RPM StepsTimer yesTimer display TFTTime setting min. 1 sTime setting max.6000 minOperating modetimer and continuous operationWorking with microtiter platesyesNumber of microtiter plates1Number of reaction vessels24x 0.5 ml / 24x 1.5 ml / 24x 2.0 mlNumber of PCR plates1Number of Deep Well Plates (DWP)1Dimensions (W x H x D)200 x 120 x 320 mmWeight7.2 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input80 WPower input max.80 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(7) { background-color: #fffacd; }Request a Formal Quote

The 515 HPLC pump is a programmable, free-standing HPLC pump available in isocratic, gradient, and s (more)emi-preparative configurations: Precise stepper motor control (48 steps/µL resolution) of dual reciprocating pistons Non-circular drive gears provide smooth, uniform eluent delivery User-programmable flow rate calibration and compressibility compensation factors ensure straightforward pump operation qualification Tests to retention time variations of less than 0.1% for highly reproducible peak performance Easy-to-read display and keypad for error-free programming Automatic purging and flow calibration