Radwag SAP/C Industrial Antivibration Table

Radwag WLC 6/A2/C/2 Precision Balance. Weighing range from 5g to 6kg. Readability 0.1 g. Linearity ± (more) 0.2 g. Plate size 195x195 mm. Self-calibration. 2 × RS232, USB-A, USB-B connectivity. Backlit LCD screen. Optional legal metrology (M) Class II (+ € 40). Radwag WLC precision balances are dedicated to very fast and accurate weighing in the laboratory and industrial environment. They can work in places far from a power supply source since they are equipped with an internal accumulator (230V) and a standard RS 232 interface. It has a stainless steel pan and a backlit LCD screen that guarantees the best legibility of the weighing result. Communication interfaces: 2 × RS232, USB type A, USB type B allow cooperation with external devices such as a printer, a computer, a pen drive, an additional screen. The scales also have a real time clock and an ALIBI weighing memory.

The antivibration table has been designed to eliminate ground vibrations during the operation of aut (more)omatic feeder. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located on the left side of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the SAL/T version is made of powder-coated steel, and the top is made of HPL board.

The antivibration table has been designed to eliminate ground vibrations during the operation of lab (more)oratory equipment such as microbalances, analytical balances and others. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located at the centre of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure and the tabletop are made of acid-resistant stainless steel.

The antivibration table has been designed to eliminate floor vibrations during the operation of PLUS (more) series laboratory balances. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located at the centre of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the table is made of powder-coated steel, and the tabletop is made of MDF.

The antivibration table has been designed to eliminate ground vibrations during the operation of lab (more)oratory equipment such as microbalances, analytical balances and others. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located at the centre of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the table is made of powder-coated steel, and the tabletop is made of MDF.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel This was removed from a univ (more)ersity engineering department where it was surplus to requirements. The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling. It is in five sections: Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor. Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters. Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm. Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal. Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.

SARTORIUS EA6DCE-I precision balance 6000g / 0.2g Laboratory balance Weighing capacity: 6000g (6kg)  (more)Readability: 0.2 g Linearity: 0.4g Calibration Weight: 5 kg Weighing pan dimensions: 30.4 x 22.8 cm Tested at 100g / 2kg / 5kg In good condition

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Scilogex MicroPette Plus Pipettor, Starter Kit-2. 0.5-10ul, 10-100ul, 100-1000ul, 1000-5000ul &  (more)Linear Stand The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus Pipettor, Starter Kit-2. 0.5-10ul, 10-100ul, 100-1000ul, 1000-5000ul & Linear Stand includes: - Two Year Manufacturer's Warranty

Benchmark R2020-150 Tube holder, 4 x 10-15ml , 2/pk (1 pack included) The >Benchmark R2020-150 Tu (more)be holder, 4 x 10-15ml , 2/pk tube holders are for use with Benchmark Rotomini Series Tube Rotators. INCLUDED: The Benchmark H3770-CSTF Clamp set for H3770 Chemically resistant/inert teflon, includes rod and clamp includes: - Set 5 x 10/15ml Tube Holders - Manufacturer's Documentation - 1 Year Manufacturer's Warranty