Defender 6000 D61XWE60K1L7 Ohaus

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

Dust-free cabinet is applicable as means of protecting the printers against operation in heavily dus (more)ted areas. The airtight shield made of stainless steel protects a printer against defects, and allows for operation in not adapted places.

RS 232 cable: scale (PUE C/31/H indicator) - computer. Lenght 2 m. Cable types: Standard P0259.2: 2  (more)m Customized P0259.5 (extra charge): 5 m Customized P0259.10 (extra charge): 10 m Compatible with: Scales operated via PUE H315 indicator Scales operated via PUE H315/Z indicator PUE H315 indicator PUE H315/Z indicator

The analog output module converts the scale output signal (mass) into an analog signal. The mass val (more)ue is most often represented in the form of a 4-20 mA current signal. Due to the low resolution of the module (several thousand), such a signal is used in automation for processes that do not require high precision. Analog output module is available in: IM01.EX-2 communication module and MW01-A7 weighing module, and for an extra charge in PUE H315 terminals.

The analog output module converts the scale output signal (mass) into an analog signal. The mass val (more)ue is most often represented in the form of a 4-20 mA current signal. Due to the low resolution of the module (several thousand), such a signal is used in automation for processes that do not require high precision. Analog output module is available in: IM01.EX-2 communication module and MW01-A7 weighing module, and for an extra charge in PUE HX7 and PUE HY10 terminals.

Four load cell stainless steel platforms The frame for recessing (foundation) is part of the set &nd (more)ash; you will receive it with the ordered platform.

This Eppendorf Mastercycler Epgradient Thermal Cycler with Controller was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in full working order. It is in good cosmetic condition with minor marks from use.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

IKA Pette Vario 1 - 10ml Pipette Features - Improved ergonomics as a result of replaceable handles  (more)ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 1 - 10ml Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 1 - 10ml Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range1 - 10mlIncrements10 µlAccuracy (Nominal Volume µl / %) ± 60 µl / 0.6%Precision (Nominal Volume µl / %)± 15 µl / 0.15%Accuracy (50% of Nominal Volume µl / %)± 40 µl / 0.8%Precision (50% of Nominal Volume µl / %)± 10 µl / 0.2%Accuracy (10% of Nominal Volume µl / %)± 30 µl / 3%Precision (10% of Nominal Volume µl / %)± 6 µl / 0.6%

IKA C-MAG HP 7 Hot Plate Heating Temp. Range 50°C to 500°C Volume Max. 10 l Setup Plate Material Cer (more)amic Features - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns!! - Exact temperature setting via digital display (LED) - Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-MAG HP 7 Hot Plate features a ceramic glass surface offering excellent chemical resistance and a fixed safety circuit of 550 °C with a Hot Top indicator to prevent burns. It allows for precise temperature control from 50 to 500 °C via a digital LED display and a turning knob. The hotplate includes a bushing for connecting an external thermometer like the ETS-D5, ensuring accurate temperature management. Additional features include a digital error code display and an elevated control panel for protection against leaks. With a heat output of 1000 W and a heating rate of 5 K/min, it supports volumes up to 10 liters. The unit measures 220 x 105 x 330 mm, weighs 5 kg, and operates efficiently within a permissible ambient temperature range of 5 - 40 °C.