Brandnew! Beckman Coulter Rotor JA 17 14 x 50 mL, 17,000 rpm, 39,800 x g

Manufacturer: Thermo Scientific Model:  Multifuge X3 FR Refrigerated Centrifuge           with TX-75 (more)0 Rotor with Round Buckets(4x Adapter: 2x 14x15ml / 2x 5x50ml Conical Tube) S/N: 41099204 P/N: 75004536 Description: Minimized footprints, maximized ergonomics - Floor models conserve valuable bench space, and have a footprint that is 24% smaller than the footprint of refrigerated benchtop models* - Low working height of 79 cm provides outstanding ergonomics when removing tubes and exchanging rotors - Fully portable with secure lockable castors— ideal for moving around the lab and easy cleaning, helping to prevent contamination Recommended for: cell culture, microplate, bioproduction, food safety, blood separation, bodily fluid processing, pharmaceutical, biotechnology, stem cell, microbiology, molecular biology, proteomics,and genomics applications Key Features: • SmartSpin technology optimizes acceleration and identifies unbalanced loads • Push-button exchange of rotors • ClickSeal bucket sealing system eliminates the need for screw caps or clips Specifications Multifuge X3 FR Floo Standing Refrigerated Centrifuge: Performance Swinging Bucket Rotors Maximum Capacity: 4 x 1000 ml (with TX-750 and BIOLiner rotors) Maximum Speed: 6000 rpm (with BIOShield 1000A rotor) Maximum RCF: 7164 x g (with BIOShield 1000A rotor) Performance Fixed Angle Rotors Maximum Capacity: 6 x 250 mL (with F14-6 x 250LE rotor) Maximum Speed: 15200 rpm (with 48x2 ml rotor) Maximum RCF: 25314 x g (with 48x2 ml rotor) Control system: microprocessor Drive system: direct, brushless induction low profile motor Rotor Locking System: Auto-Lock III Imbalance Detection System: SMARTSpin Programs: 99 (5 with direct access key) Temperature Set Range: -10 °C to +40 °C Maximum Timer Range: 99h, 59min + continuous Other Features: ClickSeal biocontainment system, language selection, motorized lid latch Max. power consumption: 1950 W Mains supply: 230 V Dimensions wit Lid closed (HxWxD): 84 x 56,5 x 67 cm Weight: 142,5 kg Specifications TX-750 Rotor: Part No.: 75003180 Rotor Capacity: 4 x 750 mL Max Speed: 4700 rpm RCF: 4816 x g Angle: 90° inclusive 4x Round Buckets (P/N:75003608) and 2x 14x15ml Conical Tube (P/N:75003639), 2x 5x50ml Conical Tube (P/N:75003638) Items delivered: - Thermo Scientific Multifuge X3 FR Floor Standing Refrigerated Centrifuge - Power Cord - TX-750 Rotor with Roundbuckets and Adapters - Instruction Manual as PDF via E-Mail The centrifuge is in perfect cosmetic as well as technical condition. - 100% functional tested (runs smooth and quiet).

Labconco 7548700 PTFE-Coated Microcentrifuge Tube Rotor PTFE-Coated Aluminum Rotor for CentriVap mic (more)ro IR. Holds twelve 15 ml vials, 20 mm dia. x 70 mm tall. INCLUDED: The Labconco 7548700 PTFE-Coated Microcentrifuge Tube Rotor includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Z446-K Refrigerated Centrifuge w/ Microplate Rotor The Z446 K universal centrifuge series off (more)ers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446-K Refrigerated Centrifuge w/ Microplate Rotor includes: - Z446-750-AC 4 x 750ml Swing Out Rotor - Z446-750-MP Microplate Carriers (Set of 4) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z287-A Compact Universal Centrifuge The Z287-A exceeds the limitations set forth by tradition (more)al microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research. Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory. INCLUDED: The Hermle Z287-A Compact Universal Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Benchmark C3303-6HP Sprint 6H Plus Clinical Centrifuge with 6 x 15ml swing out rotor, 115V The Bench (more)mark C3303-6HP Sprint 6H Plus Clinical Centrifuge is an advanced centrifuge designed for clinical applications. With a 6 position horizontal (swing out) rotor, this centrifuge can hold all common blood collection tubes up to 15ml, making it a versatile instrument for a range of applications. The centrifuge has a US Plug and is compatible with 115V, which makes it easy to use and accessible in a range of settings.The centrifuge features a back-lit, liquid crystal display that allows for digitally set speed in rpm or rcf (up to 4,000rpm/2,850xg) and adjustable speed in increments of 100rpm. This digital display ensures precision control and accuracy during the centrifugation process. Additionally, the adjustable acceleration and deceleration levels provide even more control over the speed and timing of the centrifugation process.The safety imbalance detection system and momentary operation also add to the safety and convenience of the Benchmark C3303-6HP Sprint 6H Plus Clinical Centrifuge. This centrifuge is a reliable and efficient choice for a range of clinical applications.INCLUDED: The Benchmark C3303-6HP Sprint 6H Plus Clinical Centrifuge with 6 x 15ml swing out rotor, 115V includes: - 6 x 15ml Swing Out Rotor - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

The Frontier 5306 minimizes noise and interruptions in the laboratory: low input voltage power, sile (more)nt brushless motor and a rubber base that absorbs vibrations. Operator safety: rotor imbalance sensor and two safety switches that immediately stop the rotors if the lid remains open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without pressing any buttons. Operation AC power (included) Structure Silent brushless motor, small footprint Construction features Easy to install design Technical features Speed ​​range: 0 rpm – 6.000 rpm Maximum relative centrifugal force: 2.000 g Maximum flow rate (rotor): 8 x 1,5/2,0 ml Program memories: 0 Acceleration gear: 1 Deceleration gear: 2 Lid lock: mechanic Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 1.5 / 2.0ml; Angled 4 x 8 PCR strips Execution time: continuous Safety certification: CE; FCC; TUV The Ohaus Frontier 5306 minimizes noise and interruptions in the lab: low input voltage power, a quiet brushless motor, and a vibration-absorbing rubber base. Operator safety: rotor imbalance sensor and two safety switches that stop the rotors immediately if the lid is left open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without the need to press any buttons. The KIT includes two rotors, described below. Maximum relative centrifugal force (x g) at 2,560 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 45 mm. Maximum relative centrifugal force (x g) at 2,260 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 32 mm. TECHNICAL FEATURES Speed ​​range: 0rpm – 6,000rpm. Maximum relative centrifugal force: 2,000 g. Maximum flow rate (rotor): 8 x 1.5/2.0ml. Program memories: 0. Rotor Pack: 8 x 1.5ml/2.0ml Angled Rotor; angled rotor 4 x 8 PCR strips. Accelerator gear: 1. Deceleration gear: 2. Screen (2): without display. Lid lock: mechanical. Net weight: 1.1kg. Noise level: ≤60 ±2 dB(A). Rotor Compatibility: Angled 8 x 1.5/2.0ml; angled 4 x 8 PCR strips. Rotor recognition method: not applicable. Runtime: Continuous. Safety Certification: CE; FCC; TUV.

Capacity : 16 x 0.2 mL (2 PCR strips) Max. Speed : 6000 rpm Max. rcf : 2000 xg Dimensions (WxDxH): 1 (more)25 x 145 x 115 mm Weight : 0,75 kg

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Ohaus AX622 Adventurer Toploading BalanceStriking theideal balance between inventive features and fu (more)nctional, uncomplicated weighingcapabilities, the Ohaus Adventurer Pro II AX622 incorporates all of theapplications necessary for routine weighing and measurement activities. With acolor touchscreen, GLP/GMP compliance capabilities, two USB ports, and muchmore, Adventurer AX622 is the most complete balance in its class. 620 g capacity, 0.01 g readability 175 x 195 mm platform Internal calibration 4.3 inch Full-color VGA graphic touchscreen with user-controlled brightness RS232, USB Host, USB Device (included). GLP/GMP data output with real-time clock Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu User selectable communication settings and data print options User definable project and user IDs Up to 9 operating languages Click Here to View Product Video INCLUDED: The Ohaus AX622 Adventurer Toploading Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 1.5ml Adapters for HPLC Vials Cat # 5427708006 Eppendorf 1.5ml Adapters for HPLC Vials Cat (more) # 5427708006. New in packaging, the 1.5mL adapters for HPLC vials for the Eppendorf fixed angle rotor F-45-18-17- Cryo is for use in the Eppendorf 5430/R and 5702/R centrifuges. This is a set of 18 and holds 12 x 32 mm tubes. INCLUDED: The Eppendorf 1.5ml Adapters for HPLC Vials Cat # 5427708006 includes: - Full 6 Month Parts and Labor Warranty