D20-S20F-P-R20E Velp dispersion tool

Dispersion rod S 25 KV - 25G for IKA T25 digital ULTRA-TURRAX New material in original packaging For (more) homogenizer IKA T25 digital ULTRA-TURRAX Model: S 25 KV - 25 G (S25KV-25G) Processed capacity (H2O): 0.05 - 2 l Stator diameter: 25 mm Rotor diameter: 17 mm Stator-rotor gap: 0.5 mm Max. permissible speed : 25000 rpm Peripheral speed : 22.2 m/s Immersion depth : 40 - 225 mm Total length : 270 mm Material in contact with the product : FFPM / SIC, AISI 316L, AISI 302 pH 2 - 13 Solvent resistant : yes Max. working temperature : 220 °C Sterilization methods : all methods Vacuum : 1 mbar Max. pressure : 6 bar Final fineness, suspension : 15 - 50 µm Final fineness, emulsions : 1 - 10 µm Weight : 0.6 kg

Samples and applications - Homogenization of foods (smoothies, homogenized foods, drinks) and prepar (more)ation of stuffings for food (e.g., meat, vegetables) - Homogenization/crushing of tablets - Homogenization of tobacco leaves - Preparation of ceramics and ceramic paste - Processing of textile fibers TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-10 µm - Ultimate fineness, suspensions: 15-50 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Samples and applications - Food homogenization and preparation of spreadable creams and stuffing for (more) foods (e.g. meat, vegetables) - Preparation of samples for DNA analysis, organic tissue samples and dispersions of organic tissues - Homogenisation of tobacco leaves - Processing of textile fibres - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes

Samples and applications - Preparation of foamy mixtures (ice cream, butter, margarine, icing) and s (more)preadable creams    - Preparation of tablet coatings - Preparation of ointments and pharmaceutical creams - Preparation of cosmetics (lip balm, soap, shampoo, conditioner, creams, lipstick, mascara) - Preparation of pigments, inks and paints - Preparation of biodiesel - Dispersion of petroleum derivatives (e.g. asphalt) TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-5 µm - Ultimate fineness, suspensions: 5-25 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Samples and applications - Preparation of foamy mixtures (ice cream, butter, margarine, icing) and s (more)preadable creams - Preparation of tablets coatings - Preparation of pharmaceutical ointments and creams - Preparation of cosmetic products (lip balm, soap, shampoo, conditioner, creams, lipstick, mascara) - Preparation of pigments, inks, paints - Preparation of biodiesel and dispersion of petroleum derivatives (e.g., asphalt) TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Samples and applications - Food homogenization and preparation of spreadable creams and stuffing for (more) foods (e.g. meat, vegetables) - Preparation of cosmetics (lip balms, creams, lipsticks, ...) - Preparation of tablet coatings and homogenisation/crushing of tablets - Preparation of samples for DNA analysis, organic tissue samples and dispersions of organic tissues - Homogenisation of tobacco leaves - Preparation of pigments, inks, paints and ceramic paste - Processing of textile fibres - Dispersion of petroleum derivatives (e.g. asphalt) - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-10 µm - Ultimate fineness, suspensions: 10-50 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

VACUUBRAND ME 4R NT Diaphragm Pump Ultimate Vacuum 100 mbar (75 torr) Maximum Pumping Speed 2.5 cfm (more) at 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping, evacuation and compression - High flow rate even near ultimate vacuum - Adjustment of outlet pressure and vacuum level with regulator valves - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs This one-stage diaphragm pump works as a vacuum generator and as well as a compressor. All parts in contact with pumped media are made of aluminum and selected plastics (PTFE diaphragms and valves). They enable a wide range of applications for non-corrosive gases. The inlet and outlet connections of the ME 4R NT are equipped with regulator valves for vacuum and overpressure, respectively. Both the compression pressure and vacuum level can be adjusted. Inlet vacuum level and outlet pressure are indicated by manometers. This one-stage diaphragm pump is an excellent choice for continuous, oil-free pumping and evacuation of non-corrosive gases and also for compression. Typical applications are vacuum ovens, pressure and vacuum filtrations and generation of compressed, absolutely oil-free air. Inlet- and outlet pressure can be adjusted continuously using the regulator valves. The manometers on inlet- and outlet side enable easy setting of the desired vacuum and pressure levels.INCLUDED: The VACUUBRAND ME 4R NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Selecta Agimatic-S magnetic stirrer. Analogue, without heating, 145 mm Ø upper plate, 10 L stirring  (more)capacity and adjustable speed from 60 to 1600 r.p.m. with electronic regulation. Analog Magnetic Stirrer J.P. SELECTA Agimatic-S. - Without heating (s/c). - Original design, functional construction, with epoxy-coated light alloy injected cabinet, with a 145 mm Ø upper plate, adaptable safety ring and intermediate body that acts as an overflow and thermal separator, in stainless steel. AISI 304. - Easy replacement upper plate. - Front control panel protected against splashes and facing the user. - Electronic speed regulation from 60 to 1600 r.p.m. at constant torque, which is maintained regardless of the viscosity of the fluid. - Electronic circuits free of parasites, modular and easily replaceable

The AP-12.5Y is designed to calibrate multichannel pipettes starting at 10 μl. The device feature (more)s a readability [d] of 0.01 mg and can calibrate up to 12-channel fixed-volume and variable-volume pipettes. Because the pipette calibration on the AP-12.5Y is fully automatic, it is four times faster. The calibration procedure for a 12-channel pipette takes less than 20 minutes, not six hours, on this instrument. When purchasing the AP-12.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, two pumps: a single-channel pump and a four-channel pump The ergonomic design of the AP-12.5Y makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a four-channel pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. After emptying a 12-channel pipette, the AP-12.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). The AP-12.5Y can calibrate not only 12-channel pipettes, but also single-channel pipettes.

Heidolph Incubator 1000 High Hood XL With a height of 428 mm, this cap is particularly suitable for  (more)tall culture vessels, such as 2,000 ml Erlenmeyer flasks. Suitable for the 1000-series models of the platform shakers Duomax 1030, Polymax 1040, Titramax 1000, Unimax 1010, and Promax 1020.INCLUDED: The Heidolph Incubator 1000 High Hood XL includes: - Three Year Manufacturer's Warranty