IKA T25 Digital Easy Clean Disperser

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA Ultra TURRAX® T 18 Digital Disperser Package, 1 - 1,500 ml Speed Range 3,000 to 25,000 RPM Visco (more)sity Max. 5,000 mPas Stirring Quantity Max. 1.5 l Features - Digital speed display - Electronic speed control - Electronic overload protection - Stainless steel dispersing elements can be cleaned quickly and easily - Plastic disposable dispersing elements are available in two sizes - Error code display - Quiet operation The competitively priced dispersing instrument is ideal for volumes from 1 to 1500 ml (H2O), featuring a digital speed display. It boasts a wide speed range from 3000 to 25,000 rpm, allowing high circumferential speeds even with small rotor diameters. The device offers electronic speed control, electronic overload protection, and a quiet operation at 75 dB(A) without the element. Stainless steel dispersing elements can be cleaned quickly and easily, while plastic disposable elements are available in two sizes. It also includes an error code display for easy troubleshooting. With a motor rating input of 500 W and output of 300 W, this versatile instrument is suitable for a wide range of applications.

IKA T50 Digital ULTRA-TURRAX Disperser Speed Range 600 to 10,000 mPas Viscosity Max. 5,000 mPas Sti (more)rring Quantity Max. 30 l Features - Digital speed display - Electronic speed control - Electronic overload protection - Stainless steel dispersing elements can be cleaned quickly and easily - Smooth start - Error code display The IKA T50 Digital ULTRA-TURRAX Disperser is a high-performance disperser designed for volumes ranging from 0.25 to 30 liters (H2O) with a viscosity of up to 5000 mPas. It features a powerful 1100 W motor with an output of 700 W, providing a speed range of 600 - 10000 rpm, controlled electronically with a stepless speed adjustment and displayed on an LED. The disperser includes electronic overload protection, ensuring safe operation, and stainless steel dispersing elements that can be quickly and easily cleaned. Additional features include a smooth start for controlled operation and an error code display for troubleshooting. The device operates quietly at 72 dB(A) and supports a wide range of laboratory applications with its robust design and precise control.

IKA T25 Digital ULTRA-TURRAX Disperser Speed Range 3,000 to 25,000 RPM Viscosity Max. 5,000 mPas Sti (more)rring Quantity Max. 2 l Features - Digital speed display - Electronic speed control - Electronic overload protection - Stainless steel dispersing elements can be cleaned quickly and easily - Plastic disposable dispersing elements are available in two sizes - Error code display - Quiet operation The high-performance dispersing instrument for volumes from 1 – 2000 ml (H2O) features a digital speed display. It offers a wide speed range from 3000 – 25,000 rpm, enabling users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements adds versatility, making it suitable for applications ranging from homogenizing wastewater samples, use in laboratory reactors, dispersion tasks under vacuum/pressure, and sample preparation in medical research. The instrument boasts a motor rating input of 800 W and an output of 500 W. It includes electronic speed control and overload protection, ensuring reliable performance. Additionally, it operates quietly and features an error code display for easy troubleshooting. The dispersing tool is not included in the scope of delivery.

IKA T25 Digital Easy Clean DisperserThe T 25 easy clean digital is a high-performance dispersing ins (more)trument with electronic speed control from 3.000 – 25.000 rpm for working volumes of 1 – 2.000 ml (H2O). A wide choice of S 25 dispersing elements, which are available as accessories, allow the T 25 to be used in many fields of application - whether it is homogenizing of medical samples, emulsifying of cosmetics or the suspension of coatings. In combination with an IKA laboratory reactor it is also possible to conduct dispersion tasks under vacuum or pressure.The dispersing tool is not included in the scope of delivery. Volume Range (H20) 0.001 - 2 L Speed Range 3,000 – 25,000 rpm Viscosity Max. 5000 mPas Features - Quick and easy cleaning of the easy clean dispersing tools, no disassembling required - Brushless motor guarantees dust-free and silent operation - USB interface for control and documentation via labworldsoft® - Timer/counter function - Increased safety through tool recognition and IP-class Click Here to View Product Video INCLUDED: The IKA T25 Digital Easy Clean Disperser includes: - T 25 easy clean digital - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA T25 Digital Easy Clean Disperser Specifications Motor rating input500 WMotor rating output400 WVolume range (H2O)0.001 - 2 lViscosity max.5000 mPasSpeed range3000 - 25000 rpmSpeed deviation2 %Speed control steplessSpeed display LEDNoise without element 70 dB(A)Extension arm diameter13 mmExtension arm length160 mmProcess typebatchTimeryesTimer displayLEDPermissible ON time100 %Dimensions (W x H x D)89 x 270 x 161 mmWeight3 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 30USB interfaceyesVoltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input500 WComparison of ModelsSpecificationsIKA T10 Basic ULTRA-TURRAXIKA T18 Digital ULTRA-TURRAXIKA T25 Digital Easy CleanIKA T25 Digital ULTRA-TURRAXIKA T25 Easy Clean ControlIKA T50 Digital ULTRA-TURRAXMotor rating input125 W500 W500 W800 W500 W1100 WVolume range (H2O)0.0005 - 0.1 l0.001 - 1.5 l0.001 - 2 l0.001 - 2 l0.001 - 2 l0.25 - 30 lSpeed range8000 - 30000 rpm3000 - 25000 rpm3000 - 25000 rpm3000 - 25000 rpm3000 - 25000 rpm600 - 10000 rpmNoise without element65 dB(A)75 dB(A)70 dB(A)75 dB(A)70 dB(A)72 dB(A)Extension arm diameter8 mm13 mm13 mm13 mm13 mm16 mmExtension arm length100 mm160 mm160 mm160 mm160 mm220 mmTimer--Yes-Yes-Temperature measuring rangeN/AN/AN/AN/A0 - 125 °CN/AVoltage230 / 115 / 100 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head Upper Measuring Limit 100 mbar/hPa (750 Torr) L (more)ower Measuring Limit 1 x 10-3 mbar/hPa (1 x 10-3 torr) Interface RS232C Features - Vacuum measuring device for connecting external vacuum sensors for measurements directly on the system - Flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar) - Relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C) - Robust plastic / ceramic vacuum sensor VSP 3000 with high chemical resistance - VSP 3000 with a wide measuring range from atmospheric pressure to fine vacuum (10-3 mbar) thanks to the thermal conductivity measuring principle The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C). The vacuum sensor VSP 3000 is based on the gas thermal conductivity (Pirani) principle for the wide measuring range from atmospheric pressure to 10-3 mbar. Thanks to its structure made of chemically resistant plastics (PBT, PUR) and ceramics, it offers significantly higher chemical resistance and robustness compared to conventional Pirani sensors with fine wire metal filaments. Please also note our alternative product VACUU·VIEW extended.INCLUDED: The VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head includes: - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz