Agilent 1200 series Degasser G1322AFor sale: refurbished Agilent 1200 series degasser G1322A

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

Food scale Valor 4000 Ohaus The OHAUS Valor 4000 Water Resistant Food Scale is an exceptional tool t (more)hat will enhance your workplace beyond your expectations thanks to the winning combination of touchless operation, speed and durability. Valor 4000 has been designed for wet and dry environments, offers two large LED displays, one front and one rear, food safety, trade clearances and anti-puncture keypads. Perfect. - NSF certified, USDA-AMS approved and supports HACCP certified systems: for the most complex food processing applications. - Touchless tare sensor, half second stabilization time, weight control and percentage weighing with colored LED indicators: increased productivity and less stress. - Cut-resistant keyboard and IP68 protection for extreme and wet working conditions. - The unique cut-resistant keyboard and IP68 protection ensure durability and safety, in both extreme and wet working conditions. - Increase productivity thanks to the touchless tare sensor, half second stabilization time, checkweighing and percentage weighing mode with colored LED indicators. - The Valor 4000 model for food applications is NSF certified, USDA-AMS approved and supports HACCP certified systems making it suitable for the most demanding food processing applications. Applications Weighing, percentage weighing, weight control, summation Display LED display Operation AC adapter (included) or rechargeable battery (included) Communication N / A Structure ABS construction with stainless steel platform, front illuminated level indicator, rear touchless sensor Construction features Self-closing power socket cover, menus and messages for navigation in configuration mode on keys, carrying handle

Manufacturer: Cohesive Technologies Model: TurboFlow HPLC Cyclone P 0,5 x 50 mm P/N: 952707 S/N: 618 (more)029 Description: TurboFlow HPLC Cyclone P 0.5 x 50 mm. Items delivered: - Cohesive Technologies TurboFlow HPLC Cyclone P 0.5 x 50 mm Condition: The column is in new condition, fully functional and ready for you to use.

- Storage capacity (cryobox): 690 - Storage capacity (2ml vials): 69,000 - 350 ml plasma bags: 600 - (more) Preset temperature: -82°C - Cold/hot temperature alarm limit: -87°C / -77°C Ultra low freezers, or deep freezers, are devices intended for storing blood and plasma components, human cells, tissues and other laboratory samples at temperatures as low as -86°C. "U" models reflect the highest and most uncompromising requirements with state-of-the-art technology. The cooling system is optimally designed to allow very low consumption and little heat production. Medical device in accordance with MDR (EU) 2017/745, Class IIa directive THE CONTROL PANEL Extremely easy control of all parameters: - 7" color touchscreen display at eye level - Locking mechanism protected by card reader and password - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - B Universal connected software for remote monitoring, recording and long-term archiving - USB port for easy data export - Alarm memory and history on the monitor with indication of the type - Ethernet interface for data management, via B software, to a PC - Backup battery (duration of at least 48 hours) - Optionally, the possibility of passing data to a db through the network. - Monitor indication of: time, input Volt, login status (user level) SAFETY AND TRANQUILITY Accurate temperature and 24-hour storage: The safety standards developed by B Medical Systems define unique technical features, ensuring the safe storage of preparations and setting the highest safety standards for the user. - Controlled air cooling system for a uniform and stable temperature distribution - Automatic defrost while maintaining a stable temperature - Rapid temperature recovery even after numerous door openings - Safety thermostat to prevent freezing - Long range in case of power failure - Audible and visual alarms with remote alert via SMS or email - °B Connected universal software for remote archive, report (according to FDA 21 CFR Part 1) More than certified tools - European regulation on medical devices: MDR (EU) 2017/745, Class IIa (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - EMC Directive: 2014/30 / EU (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - Low voltage directive: 2014/35 / UE (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - FDA-Medical Device Regulations: 21CFR Part 864.9700, Class II (models: 115-127 V - 60 Hz and 220 V - 60 Hz) - CCSAus certified: Yes (models: 115-127V - 60Hz and 220V - 60Hz) - GMP - Clean room classification: ISO class 6 / EC GMP B ISO class 5 / EC GMP A The 'PREMIUM' line provides you with the most advanced tool you can find. The maximum of technology that you will be able to receive in your laboratory or research center, as well as for the pharmacy and hospital. These models will not serve you best today, but for decades they will remain advanced and modern tools. Tens of years of experience in the design, construction and use, in all conditions, have allowed B Medical Systems to be able to create some of the best instruments on the market. By purchasing this instrument manufactured in Luxembourg, you will save energy each day on the time used for your applications, without risking losing your precious samples. Optimized design for energy efficiency - Often polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum Improved structure and built for everlasting durability - Anti-corrosion structure guaranteed for life - Constructed by rotational molding, in high quality polypropylene for better insulation and strength - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times - Double internal door RTMD | DATI SEMPRE ONLINE WANT EVEN MORE CONTROL? As an option, you can connect your B-Medical-Systems devices to the °B CONNECTED online software. Through this software, via PC or smartphone, you will be able to have a complete overview and management of all your B-Medical-Systems instruments. - Real-time data: temperature, set point, component status, compressor data - All recorded data: alarms, temperatures, exceptional events that occurred during refrigeration - Display and settings of all parameters - Graphic display of temperature curves - Easy graphics to monitor all the devices you own - Incredibly interactive - Customizable data printing - Easy setting of specific alarms, via email or SMS alerts - Data export for third party software - Important advantage in terms of costs compared to a traditional circular paper recorder FEATURES OF VALUE EFFICIENCY - High efficiency natural gas compliant with US SNAP and F-GAS - High performance and low consumption compressor - One-piece printed polypropylene chassis guaranteed for life against corrosion and fully recyclable - Superior insulation - Ergonomic handle with special valve to open the instrument with minimum effort. CONVENIENCE AND COMFORT - Easy access to parameters via 7 'touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for better cleaning - Low noise - Low heat emission - Modular interior equipment - Easy access to the internal drawers-trays - Highest quality stainless steel - Minimal ice formation to allow easy defrosting MULTIFUNCTION ELECTRONICS - Maximum reliability - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal '° B Software' connected for remote monitoring, recording and long-term archiving - Electronic temperature recorder - USB port for easy export of recorded data - Data backup battery Versatile and modular - Full compatibility of internal modules and rails - no need to buy new racks, you can keep previously used racks in different U models - Cryo racks optional ... and much more. Download the data sheet for the data of each model, the standard and optional accessories.

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Additional Technical Features - ISRK04HDG - Uniformity of ±0.5 at 37°C - Stepper motor drive system - CE safety certification; TUV - Speed ​​accuracy of ±1 rpm - Timer from 1 second to 160 hours