Agilent 1100 series degasser G1322A

Photometer for ammonia (NH3-N), with carrying case HANNA HI97700C New equipment in its original pack (more)aging This portable photometer are designed with an innovative optical system that offer superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. The scale : 0.00 to 3.00 mg/L (ppm) NH3-N Resolution : 0.01 mg/L (ppm) Accuracy : ±0.04 mg/L ±4% of measured value Light source : Tungsten lamp Light source : silicon photocell @ 420nm Cuvette type : round, diameter 24.6mm Auto Off : after 15 minutes of non-use Environment : 0 to 50°C (32 to 122°F); RH max 100% The battery : 3 x 1.5V batteries Size : 142.5 x 102.5 x 50.5 mm Mass : 380 g Reagent expiration : 11/2022

Invitrogen EveryPrep Universal Vacuum Manifold with Accessory Set This was removed from a universit (more)y lab where it was surplus to requirements. It is in excellent cosmetic condition with minor marks. With it are; 1 x EveryPrep Universal Vacuum Manifold Base1 x EveryPrep Mini Elution Plate1 x EveryPrep Midi/Maxi Elution Plate1 x EveryPrep Luer Plate1 x EveryPrep 96 Well Plate1 x Waste Tray1 x Waste Cover1 x EveryPrep Elution Rack1 x EveryPrep 96 Well Binding Collar1 x EveryPrep 96 Well Elution Block18 x Luer Taps 18 Rubber Stopper24 x Mini Rubber Stoppers (9mm)8 x Midi/Maxi 8 rubber stopperS (25mm)

TitroLine 7500 KF Trace SI Analytics Lab This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Pacific Biosciences Sequel DNA Sequencing System This was removed from a university lab where it was (more) surplus to requirements. The unit powers up. The PSU is included. The system boots up but shows errors in relation to a smrt link server. There was no smrt link server on the client's network which is what caused this issue. It is in very good cosmetic condition but has a dent on one of the panels. Comes with:-(Boxed) Solid State Cooling SystemsModel - UC180PN - 10-180-G1-P20-RSN - 8008262No power supply to test. 1 x 30amp twist lock to 32amp 240volt cable Consumables:-1 x Sealed Pack of TX1009 AlphaWipe Polyester Wipers 9" x 9" (75 Wipes)1 x Sealed Pack of TX404 Absorbond Polyester Wipers 4" x 4" (300 Wipes)2 x Bottles of Sequel Coolant - Dynalene PG 30% - Both expired 2018/1921 x Pacific Biosciences 96 well Verification Plates6 x Bio-Rad Hard Shell 96-Well Sample Plates1 x Pacbio Sequel Pipet Tips v2 (sealed)1 x Pacbio Sequel Pipet Tips (31 tips left)2 x Boxes Sequel SMRT Cell Oil (5 left in one/6 left in other)1 x Tecan Conductive 200ul 96pcs rack (no tips)4 x Packs SMRT Cell Mechanical (1 sealed/3 opened)4 x Packs Pacbio Tube Septa (10 per pack)1 x Pack of 11 Pacbio 0.5ml Empty NFC Verification Tubes1 x Thermal Block1 x Pack TX759B CleanTips Swabs (100 Swabs, Sealed)1 x Uline Kapton Tape1 x Red Ethernet Cable2 x Pacbio Sequel Sample Plate Adhesive Foil

Thermo Haake K10 circulating refrigerated bath. Temperature range from -10 to 100 ºC. Accuracy ± 0.0 (more)2 ºC. Capacity 3 L. Flow 12.5 L/min. PID temperature sensor. Overtemperature and low liquid level protection. Bath opening 13*10*15 cm; total dimension 19.5*36* cm. This Thermo Haake K10 circulating refrigerated bath is ideal for circulating liquids at constant temperature through external closed systems, such as rotary evaporators, photometers, refractometers, viscometers, polarimeters, and spectrophotometers, among others. Furthermore, this refrigerated bath can be used to keep samples at a constant temperature thanks to its electronic PID temperature sensor. Its handling is simple. The pump contains two speeds to reduce turbulence within the bath.

GT 38 Liquid Nitrogen Dewar with Storage Racks This item was removed from a university lab where it  (more)was surplus to requirements. It is in good cosmetic condition. We are unable to test it at our facility. Includes:- 6 x Metal Cylinders

M1 Mass Standard - knob weights - set (1 g - 50 g), plastic box.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Ultra-Microbalance UYA The UYA Ultra-Microbalance is designed to meet the demanding requirements for high-precision mass measurement. Each ultra-microbalance has an automatic adjustment that records temperature changes and eliminates indication deviations that result from an unstable working environment. As a result, automatic adjustment improves measurement readability. The ultra-microbalance consists of two components located in separate housings: a weighing terminal and a precision mechanical measuring system. The two-element design of the ultra-microbalance eliminates the risk of temperature changes and mutual vibration transmission. Essential equipment for ultra-micro scales Standard equipment of the ultra-microbalance is an anti-draft chamber, which reduces the influence of air movements and air drafts in weighing rooms on measurement results. The ultra-microbalance is placed inside the chamber, and slidable side doors provide unbounded access to the weighing chamber. All components of the balance are made of glass or aluminum, which eliminates the influence of electrostatic fields. NOTE: for the correct implementation of the weighing process with ultra-microbalances, the following are required: a properly prepared workspace and proper operation of the balance. It is recommended to use antivibration tables with a granite stabilizing plate for ultra-microbalances. Functionality of the ELLIPSIS series: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz