Mettler MS4002TSDR Precision Balance

SARTORIUS EA6DCE-I precision balance 6000g / 0.2g Laboratory balance Weighing capacity: 6000g (6kg)  (more)Readability: 0.2 g Linearity: 0.4g Calibration Weight: 5 kg Weighing pan dimensions: 30.4 x 22.8 cm Tested at 100g / 2kg / 5kg In good condition

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 2 mg Material: aluminum What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Ionizer Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Key Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 9 mass standards, 2 pairs of tweezers, 1 brush and 1 pair of gloves. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

Ohaus PR523N PR Series Precision BalanceOffering accuracy and repeatability in essential weighing ap (more)plications in laboratory, industrial andeducation settings, PR Analytical and Precision Balances deliver competitive performance at aneconomical price. Featuring RS-232 connectivity for easy communication, and a backlit display and asimple interface for uncomplicated operation, the PR is perfectly designed for your workplace. The PR is equipped with three essential weighing modes, RS-232 connectivity for datatransfer and storage, making it ideal for routine weighing applications. Equipped with an easy-to-read, bright backlit display and a simple user interface,the PR is incredibly easy to operate, with almost no training required. The PR’s small footprint saves desktop space while providing a large weighingsurface. The PR is durably constructed, and features a stainless steel panto withstand day-to-day use in the workplace. Click Here to View Product Video INCLUDED: The Ohaus PR523N PR Series Precision Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Outlet instrument*. 12 months warranty. *Heidolph Outlet instrument can be overstocked item (more), returns, demo instrument etc. They are checked by Heidolph and in a 100% functional condition. Profit from great savings thanks to slight optical defects. Complete set with Heidolph glassware set G3 scope of delivery: - Hei-VAP Core ML G3, Rotary Evaporator with motor lift and vertical glassware set G3 - Hei-VAC Control, Vacuum controller complete with integrated ceramic vacuum sensor, regulation valve and venting valve. With wall-plug power supply - Vacuum pump Rotavac Valve Tec - Chiller Hei-CHILL 350 (instead of Hei-CHILL 250) LP 3.132,00 - Tubing set - Thermal fluid - Kryo 30

KK - DURABLE AND HIGHLY CUSTOMIZABLE The KK 500 FIT DS allows the operator to precisely set the temp (more)erature and humidity inside the chamber, as well as control and monitor the light intensity. You can set the temperature from 0°C to 60°C (with the lights off) or from +10°C to +50°C (with the lights on) and thanks to an ultrasonic humidifier, adjust the humidity from 30% up to 90%. The wording 'DS' (Door-Side) indicates that the fluorescent lamps are installed in both the lateral walls and the door. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART PRO control panel is among the most complete you can find on the market. You can manage the instrument and day/night conditions with control of light intensity in an instant, with the large touchscreen. You will save your temperature, humidity and light programs and download the event log, for a professional and precise workflow. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Durable. Tailored. Tailored? Yes! Light panels are made to your specifications, with a range of different wavelength LED options available. As standard, for the KK 500 FIT DS, fluorescent lamps (white light 840 - continuously adjustable) are installed in the side walls and in the door. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm Presentation of the climatic chamber with LED lighting: Together with the climatic chamber you will also receive: DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System. For more information, we invite you to view our article POL-EKO Accessories, where you can find photos and characteristics of all the accessories available for Pol-Eko models. Accessories for KK climatic chambers: - Optional separate controls for each light module - Grid shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Phytotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door - Container for deionized water

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

IKA T25 Easy Clean Control Disperser Speed Range 3,000 to 25,000 RPM Viscosity Max. 5000 mPas Stirr (more)ing Quantity Max. 2 l Features - Continuous temperature measurement with S 25 EC-T-C-18G-ST tool including an integrated temperature sensor - Operation time detection through RFID - Quick and easy cleaning of the easy clean dispersing tools, no disassembling required - Brushless motor guarantees dust-free and silent operation - USB interface for control and documentation via labworldsoft® - Timer/counter function - Increased safety through tool recognition and IP-class - Remote control with WiCo (not incl. with delivery) The T 25 easy clean control is a high-performance dispersing instrument with electronic speed control from 3,000 - 25,000 rpm for working volumes of 1 - 2,000 ml (H2O). The new tool S 25 EC-T-C-18G-ST allows temperature measurement and operation time detection through RFID. Device overheating is prevented by continuous temperature monitoring and the setting of temperature limits. The detection of operation time serves to guarantee regular maintenance. All S 25 tools are compatible with T 25 easy clean control.Click Here to View Product Video INCLUDED: The IKA T25 Easy Clean Control Disperser includes: - T 25 easy clean control - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA T25 Easy Clean Control Disperser Specifications Motor rating input500 WMotor rating output400 WVolume range (H2O)0.001 - 2 lViscosity max.5000 mPasSpeed range3000 - 25000 rpmSpeed deviation2 %Speed controlsteplessSpeed displayLEDNoise without element70 dB(A)Extension arm diameter13 mmExtension arm length160 mmProcess type batchTemperature display yesTemperature measuring range 0 - 125 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±1 KTimeryesTimer displayLEDPermissible ON time100 %Dimensions (W x H x D)89 x 270 x 161 mmWeight3 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 30USB interfaceyesVoltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input500 WComparison of ModelsSpecificationsIKA T10 Basic ULTRA-TURRAXIKA T18 Digital ULTRA-TURRAXIKA T25 Digital Easy CleanIKA T25 Digital ULTRA-TURRAXIKA T25 Easy Clean ControlIKA T50 Digital ULTRA-TURRAXMotor rating input125 W500 W500 W800 W500 W1100 WVolume range (H2O)0.0005 - 0.1 l0.001 - 1.5 l0.001 - 2 l0.001 - 2 l0.001 - 2 l0.25 - 30 lSpeed range8000 - 30000 rpm3000 - 25000 rpm3000 - 25000 rpm3000 - 25000 rpm3000 - 25000 rpm600 - 10000 rpmNoise without element65 dB(A)75 dB(A)70 dB(A)75 dB(A)70 dB(A)72 dB(A)Extension arm diameter8 mm13 mm13 mm13 mm13 mm16 mmExtension arm length100 mm160 mm160 mm160 mm160 mm220 mmTimer--Yes-Yes-Temperature measuring rangeN/AN/AN/AN/A0 - 125 °CN/AVoltage230 / 115 / 100 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V.comparison-table tr td:nth-child(6) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote