Qiagen ESEQuant LR3 Lateral Flow Fluorescence Measurement

New Brunswick Scientific Innova CO-170 Lab This item was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included) The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

This BIO RAD Bio-Plex System, Luminex XYP & Luminex 100 Multiplex was removed from a university  (more)lab where it was surplus to requirements. The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility. System includes: BIO RAD Luminex XYPModel: Luminex XYPSerial#: LXY05066104 BIO RAD Luminex 100Model: Luminex 100Serial#: LX1000503501

Immunetics MiniBlotter 16. 2x16 channels. Max reagent volume per channel: 350μL. Channel width x len (more)gth: 3.0 mm x 5.5 cm. Blots width 8.3 cm. For membrane assays including Western, Northern, and Southern Blots and Checker-board Blots. Requires microliter volumes, not milliliter volumes. Multiple samples analyzed simultaneously. No cross-contamination between channels. Decrease processing time. All results on a single membrane. Compatible with all standard electrophoresis systems. With the Immunetics MiniBlotter enable you to perform multiple antibody or probe incubations on a single membrane, using microliter volumes of reagent. Typical applications include monoclonal antibody screening on western blots, animal and human serum screening, and DNA probe hybridizations. Sample processing is streamlined through use of the Washing Manifold, which enables washing of all sample lanes simultaneously. Reactions can be detected by all conventional methods, including enzyme conjugates, chemiluminescence and radiolabels.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Qiagen Model: ESEQuant LR3 Description: The ESEQuant LR3 is a highly sensitive, robust (more) and cost-effective fluorescence measurement system for rapid testing at the point of need. This flexible and reliable system, based on a ready-to-use concept, allows you to easily develop fluorescence or colourimetric tests. Starter kits are immediately available and can be quickly adapted to different test strip or cassette formats. The powerful combination of fluorescence reader, state-of-the-art touchscreen and comprehensive Lateral Flow Studio software for developers provides an easily customisable and simple to use lateral flow system. Key features: - Small, stand-alone instrument - Customisable system with short time to market - Simplified data entry via modern touchscreen - LIS and HIS connectivity for easy integration - Fulfilment of legal requirements Technical specifications Housing: Customisable for different cassette formats Portable device with a weight of <2 kg (4.4 lb.) Small footprint of 230 x 200 x 100 mm (9.1 x 7.9 x 3.9 inches) Optics: Colourimetric or fluorescence detection Internal calibration with standards Highly sensitive Electronics: Interactive 17.8 cm (7 inch) touch screen Battery operated Embedded PC Software: Standalone operation Customisable GUI Pre-installed algorithms Connectivity: LIS and HIS connectivity Ethernet and 4 USB ports Optional: WLAN and Bluetooth Optional accessories: Internal or external barcode reader Printer RFID reader Scope of delivery: - ESEQuant LR3 - Operating instructions as PDF via e-mail The device is in absolute top condition and has been 100% tested for function.

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS:

This CTC Analytics Leap HTC PAL Autosampler HPLC was removed from a university lab where it was surp (more)lus to requirements. All units are in good cosmetic condition and powered up. We are unable to test the system further at our facility. Autosampler consists of:Autosampler main unit MXY 01-01BSerial No. 113399 Power supply unit MN01-00 Injector unit MZ01-00DSerial No. 980 Control key pad/screen MB 01-00A 2 x pumps MV 02-01ASerial Nos. 2961, 2963 Sample tray 3 drawer storage MP 02-00B Needle wash unitBottle shelf

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Set of 9 ZWIEBEL calibration weights 1g to 200g class M1 INOX Laboratory calibration weights in stai (more)nless steel Brand: ZWIEBEL 9 weights: 1g => maximum permissible error: ± 1mg 2g => maximum permissible error: ± 1.2mg 2g => maximum permissible error: ± 1.2mg 5g => maximum permissible error: ± 1.6mg 10g => maximum permissible error: ± 2mg 10g => maximum permissible error: ± 2mg 20g => maximum permissible error: ± 2.5mg 100g => maximum permissible error: ± 5mg 200g => maximum permissible error: ± 10mg Type / class: M1 Weight checked on a precision balance to 0.01g (10mg) - see photo In its wooden box weight not calibrated