Classen+Co Glasfaser Endoskop Fiber Endoscope Vintage

Olympus Endoscopy System This system was removed from a university lab where it was surplus to requi (more)rements. The system powers on and is in good condition, with some signs of wear. The camera works as intended, though the system is missing its camera probe and all lighting cables for the Olympus CLV-S20 model. No further testing was carried out. (Please note that the metal trolley and MacBook used for testing are not included.) The system comprises the following: - Sony PVM-205MD - Model: PVM-205MD - Serial No.: 2002648 - Olympus CLV-S20 - Model: CLV-S20 - Serial No.: 7622380 - Olympus OVT-SX - Model: OVT-SX - Serial No.: 1601417 - Olympus OVT-SC - Model: OVT-SC - Serial No.: 7205132 - Olympus OVT-S3 - Model: OVT-S3 - Serial No.: N/A (Missing Info Plate) - Olympus Digital 3CCD - Model: OVT-SX - Serial No.: 1601417

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Applied Biosystems/MDS SCIEX Pro ID Software This was removed from a university lab where it was sur (more)plus to requirements. It has not been tested. The item is in good cosmetic condition. There are scratches on the jewel case and signs of age on the booklet, however, there are no marks on the back of the disc.

Hoefer SE250 Mighty Small II Mini Vertical Protein Electrophoresis Basic Unit Compatible Glass Plat (more)e Sizes (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 500 V, 500 mA, 12 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 10 x 8 cm - Efficient active cooling ensures sharp bands - Quick and easy to assemble - Requires minimal buffer - Easily upgradable to the SE260 (with optional accessories) resulting in the additional capability of accommodating both 10 x 8 and 10 x 10.5 cm gels - Choose from a wide variety of accessories The Hoefer SE250 Mighty Small II Mini Vertical Protein Electrophoresis Unit is a compact, reliable system engineered for rapid electrophoretic separation, making it ideal for quick screening applications. This unit supports a maximum glass plate size of 10 x 8 cm, providing an efficient setup for a variety of protein and nucleic acid analyses. With its active cooling system, the SE250 ensures sharp, well-defined bands across samples, delivering consistent results that labs can rely on for precise electrophoresis. The SE250 is designed for quick assembly and minimal buffer requirements, streamlining workflow without compromising performance. For labs that may want to expand their capabilities, this unit can be easily upgraded to the SE260 model, adding compatibility for both 10 x 8 cm and 10 x 10.5 cm gels and broadening the range of precast gel options available. Operating smoothly within standard lab conditions, this unit handles temperatures up to 45°C and humidity levels up to 80%, while its power settings of up to 500 V and 500 mA ensure versatility for diverse experimental needs. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber with Cooling Core - Safety Lid with High Voltage Leads - Casting Cradle with Sealing Gasket Set - Casting Clamp Assemblies, 2 pcs - Cams, 4 pcs - Glass Plates, Rectangular, 10 x 8 cm, 10 pcs - Alumina Plates, Notched, 10 x 8 cm, 2 pcs - Spring Clamps, 4 pcs - Combs,10 well, 2 pcs - T-Spacers, 4 pcs - Well Locating Decals, 2 pcs - Gel Seal INCLUDED: The Hoefer SE250 Mighty Small II Mini Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber with Cooling Core - Safety Lid with High Voltage Leads - Cams, 4 pcs - Spring Clamps, 4 pcs - Well Locating Decals, 2 pcs - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

A&D Weighing Apollo GX-324AEN Analytical Balance, 320 g, 0.1 mg (NTEP Class I) Capacity 320 g R (more)eadability 0.0001 g Repeatability 0.0001 g Features - NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Eliminate static disturbance of samples with available fanless / touchless ionizer - The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-324AEN Analytical Balance, 320 g, 0.1 mg (NTEP Class I), provides high-precision measurements with a 320 g capacity and 0.0001 g readability. This NTEP-certified balance ensures accurate, reliable results for regulated environments. It includes a fanless ionizer, standard in AEN models, which neutralizes static charges without contact, ensuring stable, disturbance-free weighing. An external IR sensor enables touch-free operation, preserving cleanliness and enhancing accuracy by allowing users to interact with the balance without direct contact. The Electronically Controlled Load (ECL) management system supports repeatability testing and automatic precision checks without external weights, further reinforcing measurement reliability. The GX-324AEN features a fast stabilization time of approximately 2.0 seconds, making it ideal for high-throughput settings where speed and accuracy are critical. Streamlining daily operations and ensuring USP41 compliance, this advanced tool alerts users when sample sizes fall below minimum weight, reducing waste and boosting efficiency. Impact shock detection and overload protection provide added durability, while six simple keys and a quick toggle function facilitate smooth switching between USB and RS-232C communication options for flexible data management. Enhanced usability features include an illuminated, front-mounted level for easy leveling, even with gloves on, along with automatic self-calibration and one-touch internal/external calibration to ensure valid results. An extensive range of measurement units, along with percent calculation and piece counting capabilities, add versatility for diverse scientific applications. With a robust design, NTEP certification, and advanced features like the IR sensor, the A&D Weighing Apollo GX-324AEN Analytical Balance is an outstanding choice for professionals seeking precise, regulated analytical capabilities. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-324AEN Analytical Balance, 320 g, 0.1 mg (NTEP Class I) includes: - Touchless IR Switch - External Key Jack - Large Glass Breeze Break with Built-in Fanless Ionizer - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2006 Tested at 37°C and -10°C