Freezer F500 B Medical Systems

Optocell Technology CuBiAn XC Fully Automated Clinical Chemistry Analyser This was removed from a un (more)iversity lab where it was surplus to requirements. The unit powers up and all passwords have been reset. These will be released on purchase. It initialises well and operates as it should. It is in good cosmetic condition with minor marks.

This Randox RX Monza Automated Biochemistry Analyser was removed from a university lab where it was  (more)surplus to requirements The lab informed us that it was in full working order and had seen very little use. It has been powered up at our facility and is in excellent cosmetic condition. Accessories included:-Operator ManualInstructional DVDLamp (M925-002)RS232 Cable (M701-705)Cell Clean (M800-082)Thermal Paper Roll (M200-170)Waste Tube (M600-226)Small black part (M100-946) Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Beckman Coulter AC T 8 Haematology Analyser Lab This item was removed from a university laboratory w (more)here it was surplus to requirements. The unit powers on with a fully functioning display screen.When powered, an error symbol appears, which refers to "Special Procedures and Troubleshooting" in the user manual. No additional testing has been conducted. Included Components: - Coulter Ac.T Pak Management CARD Specifications. - Model: AC T 8 - Model No.: 6706319 - Serial No.: AB 023683

24” Medical Panel PC with 6th Generation Intel® mobile ULT Core™ i7/i5/Celeron® processorModel Code: (more) POC-W24C-ULT3 This item was removed from a university where it was surplus to requirement. It is in excellent cosmetic condition, but it is untested due to not including the required cable. Power Adapter & Cable not included.

Laboratory tap with gas base Straight wall feeder with base For technical gases, inert gases (nitrog (more)en), air (no burning gases).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Pharmacia Biotech FPLC System This was removed from a university lab where it was surplus to require (more)ments. The system has been powered up but not tested further. Everything is in reasonable to poor cosmetic condition. All the units plugged into a power strip that supports EU plugs. Included are; 2 x Connectivity Monitor, 004763/System No. 003763, 004518/System No. 0035181 x Pump P-500, 0175171 x Liquid Chromatography Controller LCC-500 Plus, 3315431 x UV-M II, 0045862 x MotorValve MV-71 x 10200 PERSPEX Peristaltic Pump, 5024

Corepoint Scientific FRF302WWW-0GP Flammable Storage Combo 1C to 10C Refrigerator/-15C to -25C Freez (more)er Temperature Setpoint Range -15°C to -25°C Capacity 30 Cu. Ft. Defrost Method Manual Features - One solid swing door/one interior solid swing door-freezer chamber - only, right hinged, not reversible - Three adjustable refrigerator shelves - Keyed door lock - Magnetic door gasket for positive seal - Stainless steel door handle - High density urethane foam cabinet and door insulation The Corepoint Scientific FRF302WWW-0GP Flammable Storage Combo offers a versatile and secure solution for storing sensitive materials within laboratory settings, providing a dual-function unit that combines refrigeration and freezing capabilities. This robust system features a 25 cu. ft. refrigerator and a 5 cu. ft. freezer, each designed with a solid, right-hinged door and a heavy-duty handle, ensuring a positive seal with magnetic door gaskets. Constructed from powder-coat steel with high-density urethane foam insulation, this combo unit ensures excellent thermal retention and stability. The refrigerator operates within a temperature range of 1°C to 10°C, while the freezer maintains temperatures from -15°C to -25°C, managed by a mechanical thermostat for reliable, straightforward control. Interior lighting in the freezer chamber improves visibility and safety when accessing stored items. INCLUDED: The Corepoint Scientific FRF302WWW-0GP Flammable Storage Combo 1C to 10C Refrigerator/-15C to -25C Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

KNF LIQUIPORT IP65 NF 1.300 FT.18S Diaphragm Liquid Transfer Pump Flow Rate 0.5 to 3 l/min Suction  (more)Height (max.) 3 mWg Pressure (max.) 4 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual control - Self-priming, can run dry - Splash-proof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM-Simriz Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate with LED indicator. INCLUDED: The KNF LIQUIPORT IP65 NF 1.300 FT.18S Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 12mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Fast and Stable Measurement It only takes a second for the balance to display the final measurement  (more)result. Weighing Heavy Loads with High Accuracy On the large weighing pan of a PM balance, you can weigh a load of 120 kg with a readability of 0.2 g and second-to-none repeatability. Minimum Eccentricity Error Over the Entire Range PM balances can be used to determine the mass of irregularly shaped components with a centre of gravity that is significantly shifted from the weighing pan axis. Parameter Stability Over Time and After Transport The mechanical design is resistant and robust, allowing you to maintain the correct metrological parameters after transport and despite long and intensive use. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.01 g on the 200 x 185 mm weighing pan and with a readability of 0.2 g on the 500 x 400 mm weighing pan. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails New, lmproved The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. 5Y Terminal With Terminal 5Y you get a 10-inch display, Digital Weighing Auditor, multi-step user verification, ambient light alerts, hotspot, RFID*, live note voice and text notes, voice commands for the balance and handy measurement history within the handy library widgets Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

F1 Mass Standard - knob weights, service case. Nominal value - 2000 kg.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database