Offering the best quotes for your research!
New and used scientific instruments
🚚 Shipping Worldwide 🌎
ABS 10.5 Cu Ft Solid Door Refrigerator PH-ABT-NSF-10PS
Product Description
General Specifications:
- Storage Capacity: 10.5 cu ft gross volume
- Door: One solid swing door, right hinged, self-closing, magnetic sealed gasket, keyed lock, non-reversible
- Shelves: Seven total (six adjustable, one fixed) with guard rail on back
- Interior Lighting: Shielded, switched LED lighting with balanced spectrum, full coverage
- Airflow: Forced air technology (patent pending)
- Exterior: White powder-coated steel
- Insulation: Foam-in-place with EPA-compliant high-density urethane foam
- Mounting: Low profile roller wheels and leveling legs; requires 4" clearance for ventilation
- Weight: Product 154 lbs, shipping 189 lbs
- Power: 110-120V AC, 15 A min, NEMA 5-15 plug, rated amperage 2.3 A
- Environmental: Indoor use only, optimal range +18°C to +26°C, 70% RH
Temperature Control and Performance:
- Controller: Parametric microprocessor with LED display, 0.1°C resolution
- Setpoint Range: 1°C to 10°C (factory setting must remain unaltered per NSF/ANSI 456)
- Display Probe: Calibrated stainless steel
- Temperature Uniformity: ±1.0°C (cabinet air)
- Stability: ±0.8°C (cabinet air)
- Max Variation: ±1.3°C
- Door Opening Impact: Temperature does not exceed 5.8°C within 8 seconds of door open
- Recovery Time: Under 8°C within 3.5 minutes after 3 minutes door opening
- Energy Consumption: 2.42 kWh/day
- Heat Rejection: 3.27 kWh/day (465 BTU/h)
- Noise Level: ≤49 dBA installed
- Pull Down Time: 25 minutes to nominal temperature
Alarms and Monitoring:
- Visual and Audible Alarms: High/low temperature alarms compliant with NSF/ANSI 456
- Remote Alarm Contacts: Included for external monitoring
- Temperature Monitor Device (TMD): CDC guideline compliant, 3 years calibration certification, buffered probe, min/max memory, field installable
Certifications:
- NSF/ANSI 456 for vaccine storage
- UL, C-UL, ETL, C-ETL listed
- Compliant with UL471 electrical and hydrocarbon refrigerant safety standards
Additional Features:
- Compatible with Pyxis®, Omnicell®, and Acudose Rx® access control systems
- Environmentally friendly HFC-free refrigerant
- Two-year parts and labor warranty; five-year compressor warranty
Shipping Options:
- Multiple delivery levels from dock to inside delivery with installation services available.
Item Stats
Product details
| OPERATIONAL ENVIRONMENT | INDOOR USE ONLY. OPTIMAL OPERATING RANGE: +18°C TO +26°C (+65°F TO +78°F), 70% RH |
| STORAGE CAPACITY | 10.5 CU. FT. GROSS VOLUME |
| DOOR | ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK |
| SHELVES | SEVEN SHELVES (SIX ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK |
| MOUNTING AND INSTALLATION | LOW PROFILE ROLLER WHEELS AND LEVELING LEGS. NOTE: 4" OF CLEARANCE ON ALL SIDES MUST BE MAINTAINED FOR ADEQUATE VENTILATION |
| INTERIOR LIGHTING | SHIELDED, SWITCHED LED LIGHTING, FULL COVERAGE, BALANCED SPECTRUM |
| AIRFLOW MANAGEMENT | FORCED AIR TECHNOLOGY, PATENT PENDING |
| EXTERNAL PROBE ACCESS | REAR WALL PORT (3/8") DIA. |
| INSULATION | CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM |
| EXTERIOR MATERIALS | WHITE POWDER COATED STEEL |
| ACCESS CONTROL | PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE |
| GENERAL WARRANTY | TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION |
| COMPRESSOR WARRANTY | FIVE (5) YEARS COMPRESSOR WARRANTY |
| PRODUCT WEIGHT | 154 LBS. |
| SHIPPING WEIGHT | 189 LBS. |
| RATED AMPERAGE | 2.3 AMPS |
| POWER PLUG/POWER CORD | NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL |
| FACILITY ELECTRICAL REQUIREMENT | 110-120V AC: 15 A (MINIMUM) |
| AGENCY LISTING AND CERTIFICATION | CERTIFIED IN ACCORDANCE WITH THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE. UL, C-UL, ETL, C-ETL LISTED (EITHER SINGLE OR DUAL AGENCY LISTINGS) AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY. |
| INCLUDED ACCESSORIES | TEMPERATURE MONITOR DEVICE (TMD) COMPLIES WITH THE CURRENT CDC GUIDELINES, WITH 3 YEARS CERTIFICATION OF CALIBRATION, “BUFFERED” PROBE IN THE PRODUCT SIMULATED SOLUTION, MIN/MAX MEMORY, FIELD INSTALLABLE, AND VISUAL & AUDIBLE TEMP ALARM |
Documents
About QuestPair
Our Mission
QuestPair is Europe's leading platform for scientific equipment, connecting researchers and organizations with verified suppliers of both new and pre-owned laboratory instruments in the biotech and material science industry. Our aim is to make the procurement of scientific instruments more efficient, cost-effective, and reliable, so that laboratories can focus on advancing science rather than searching equipment and negotiating deals.
Why Choose Us
Founded by scientists for scientists, we understand your challenges. Our AI-powered platform offers transparent pricing, verified quality, and expert support, ensuring you find the perfect equipment for your research needs.
Verified Quality
Every piece of equipment undergoes thorough verification by our expert team, ensuring reliability and performance.
Cost Efficiency
Access both new and premium pre-owned equipment, saving up to 40% without compromising on quality.
Expert Support
Our dedicated team provides personalized guidance throughout your equipment procurement journey.
Ready to Transform Your Research?
Join thousands of biotech scientists who trust QuestPair for their equipment needs.
What customers think about QuestPair
Brilliant service. Everything arrived and was exactly as expected
Jon Welburn
Great customer service! Got me great options for the equipment I was looking for and in a timely manner.
Pamela
Space Lab Technologies, LLCHarm is very responsive to help me find the right equipment. The product I received is in a good condition.
Ph.D. Hsin-Wen Liang
Northeastern UniversityFrom €3,789.66*ex. VAT
In Stock
Get a quote within one business day
Verified equipment
Trusted warranties & returns
Safe payment and fast delivery
Didn't find what you're looking for?
Our sales team specializes in sourcing custom and hard-to-find products to meet your exact specifications. Submit a request for a tailored quote.
Frequently Asked Questions
Is this equipment new or refurbished?
How long does shipping take?
What about warranty and returns?
Why request a quote?
Need help choosing the right tool?
- Accurate policy information specific to your chosen product
- Clear understanding of warranty coverage and terms
- Detailed return policy explanation
- Transparent shipping options and costs
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.