Renishaw Incise Dental Scanner Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Dentsply TRIAD 2000 Dental Visible Light Curing System was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

Carl Zeiss Jena 212F OPM Dental Binocular Microscope LabModel: 212F OPM This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition, with all mechanical elements in good working order. However, as the power supply is not included, we cannot conduct further testing. As stated, the power supply is not included.

Renishaw Incise Dental Scanner This item was removed from a university where it was surplus to requi (more)rement. The unit powers up and is in good working order, however the PSU is not included. The software is not included.

Julabo F25-ED Refrigerated/Heating Circulator Water Bath This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and is in good working order. The digital thermometer was used for testing only and is not included. It is in good cosmetic condition with minor marks.

Zeiss Axioskop FS Fluorescence Microscope w/ 5 x Objectives This was removed from a university lab  (more)where it was surplus to requirements. The product has not been tested due to the absence of its power supply, but it is in good condition with minimal signs of wear. Due to the power supply not being included, we are unable to test further. Includes the following untested objectives; Gallenkamp 160/0.17 100 1.25 oil Zeiss Achroplan 10x/0,25 ∞/- Zeiss Epiplan 50x/0,50 44 28 50 Zeiss LD Achroplan 32x/0,40 PH2 ∞/1,5 Zeiss Achrostigmat 5x/0,12 44 01 20

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Hermle Z206-A Centrifuge w/ 6 x 50ml RotorFeatures - Microprocessor control - Active imbalance detec (more)tion and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 50ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge w/ 6 x 50ml Rotor includes: - 6 x 50ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Benchmark R2020-0507 Tube holder, 5 x 5-7ml, 2/pk (1 pack included) The Benchmark R2020-0507 Tube ho (more)lder, 5 x 5-7ml, 2/pk (1 Pack Included) is for use with the Benchmark Rotomini and Rotomini Plus Series Tube Rotators. INCLUDED: The Benchmark R2020-0507 Tube holder, 5 x 5-7ml, 2/pk includes: - 1 Set of Benchmark R2020-0507 Tube holders - Manufacturer's Documentation - 1 Year Manufacturer's Warranty