Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This autoclave was removed from a university lab as surplus to requirements. We were assured the uni (more)t was in good working order when last used, but was no longer required by the lab. At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used. Type:B-QCS-54260To:BS.2646Capacity:200Maxpressure:25Serial No:2845Date:9-1-06Litres:2006Test Pressure:394Max Filling mass:100kgIntended use:SteriliseProduct group:2Design temp:150 degrees cMax Temp: 138 degrees cMin Temp: N/AVoltage: V00 50/60 8KW

Biobase BKQ-BL Series food autoclaves. Designed for food sterilization. Capacity 50 L (model BKQ-B50 (more)L) or 75 L (model BKQ-B75L). Heating and pressure creation by steam generator. Temperature and pressure of 121 ºC and 0.22 MPa, respectively. Socket for the connection of purified water for steam formation. Fast cooling after sterilization by water circuit. Compressor connection for backpressure at the end of the sterilization cycle. Heart probe for the determination of sterilization inside the food. SUS304 stainless steel chamber. Serial printer and USB port for data logging. Automated temperature control, addition of water for cooling and drying. LCD display for checking pressure, temperature, time and alarms in real time. Safety mechanisms due to overpressure or over temperature. It includes a basket. User manual. The price shown corresponds to the 50 L model. To show the price of the 75 L model, use the dropdown below. Note: the water purification system and the compressor (optional) are not included.

Tuttnauer 5075ELP Lab Line Benchtop AutoclaveFeatures - Designed to autoclave everything in your lab (more), including liquids - Take advantage of Tuttnauer’s state-of-the-art control system with multi-color display - Automatic pressure locking system, door will not open when the chamber is over pressured - Integrated printer documents date, time, temperature and pressure - No water utility connections needed, just plug in and add water - Two integrated temperature probes for complete sterilization of liquids - Four validated cycles (glass, plastic, liquid A and liquid B-waste) - Stores up to 200 past cycles you can open on your PC - Create up to 16 custom cycles - Comes with 8 factory set cycle programs that cover the processing needs of most laboratories and research centers - Optional biohazard filter (BH) prevents contaminated air from exhausting into the lab Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316 Ti grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning Designed to save space on your laboratory workbench, the 5075ELP is a front-loading benchtop autoclave that provides high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories. The 5075ELP has an advanced multi-color control panel and a chamber made of 316 Ti stainless steel. Each model has several optional added-value features which can be configured for fast cooling, efficient drying, biohazard and waste sterilization, F0 control, and more. INCLUDED: The Tuttnauer 5075ELP Lab Line Benchtop Autoclave includes: - 3 Trays - Tray Holder - Base Plate - Autoclave Stand - 2 Buck Boost Transformers - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Tuttnauer 2540M Autoclave The Tuttnauer 2540M Autoclave is designed to compliment any healthcare fa (more)cility. The bright new easy-to-use panel was designed with the operator in mind. The 2540M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 14 min, Cold Start 30 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2540M Autoclave includes: - 3 Stainless Steel Trays - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Speed: 600-3200 rpm Dimensions (HxWxD): 165 x 122 x 165 mm Weight: 4 kg

Sanyo MDF-U730M Biomedical Freezer Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Includes: 6 x Shelves - 62 x 62cm14 x Containers - 62 x 31 x 16cm

Hybaid Maxi 14 Hybridisation Oven This was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and is in good working order, but may need calibrating to your equipment. It was tested with a digital thermometer (not included). It is in good cosmetic condition with minor marks. Internal Dimensions - D34 W34 H50cm

Olympus IX70 Inverted Fluorescence Microscope This item was removed from a university lab where it w (more)as surplus to requirements. The microscope is in reasonably good cosmetic condition but some issues were found during servicing. • Fluorescence attachment & mercury lamphouse present but no mercury power supply starter.• 2 filter cubes present – U-MWG2 & U-MWB• Some evidence of corrosion due to salt or other liquid.• Coarse focus very stiff – clutch lever stuck fast.• Transmitted light power supply is good.• Eyepiece adjusters are stuck. Therefore, it is listed as Spares/Repair. Includes:- Olympus BX 100W HBO Mercury Microscope Lamp U-ULS100HG (no power supply included) - 2 x WH10X-H/22 eyepieces - Fluorescence attachment and mercury lamphouse (no mercury power supply starter) - 2 filter cubes: U-MWG2 and U-MWB Condition Notes:- Missing stage, objectives, and condenser - Some corrosion present, likely due to salt or liquid exposure - Coarse focus is very stiff, with a stuck clutch lever - Transmitted light power supply is functional - Eyepiece adjusters are stuck

Hoefer PS200HC High Current Electrophoresis Power Supply Voltage 5 to 200 V in 1 V step Current 10 t (more)o 2000 mA in 1 mA steps Maximum Wattage 200 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 200 V, 10 to 2000 mA, 200 W - Four sets of 4 mm output jacks - Ideal choice for blotting applications - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS200HC High Current Electrophoresis Power Supply is an essential tool for large electrophoretic blotting applications and low voltage electrophoresis runs. Its compact design, large handle, and user-friendly interface make setup and operation simple, ensuring seamless integration into any lab. Featuring a large, easy-to-read LED display, the PS200HC allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs with ease. With a power range of 5 to 200 V and 10 to 2000 mA, this power supply delivers up to 200 W of reliable performance. The PS200HC operates in three distinct modes: Constant Voltage Mode, where the power supply maintains the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where it maintains the selected current flow by adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to operating limits, the system switches to maintaining the other parameter. Key features such as automatic recovery after power failure, short circuit and open circuit protection, and four 4 mm output jacks enhance its flexibility and safety. Designed for both continuous operation and timed runs, the PS200HC is the ideal choice for dependable, high-current electrophoresis applications. INCLUDED: The Hoefer PS200HC High Current Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

RS 232 cable: MAS.1 module - computer. Cable length: 10 m Compatible with: MAS.1 module MAS.1.R modu (more)le