Tuttnauer 3870M Manual Analog Autoclave

Astell ASA240 Floorstanding Autoclave This item was removed from a university laboratory where it wa (more)s surplus to requirements. It powers on and is in reasonably good cosmetic condition externally. However, the internal plastic lid cover supports have been snapped off to release the lock and remove the lid. This allows access, but the unit remains inoperable for standard use. Therefore, it is sold as Spares/Repair. As displayed, it is in poor cosmetic condition internally. Specifications; - Model- AMA240N - S/N- CLN51381

This item has just arrived in our stock. Please enquire for further details.

Hirayama HICLAVE HVA-110 Economical Floor-Standing Autoclave with Cooling Fan, 110L, 208/220/240V Ch (more)amber Volume 110L Sterilization Temperature Range 105C to 135C Chamber Dimensions 16.5" x 31.3" (42.0 cm x 79.5 cm) Features - Space-saving design with lid opening upward. - Standard built-in cooling fan for faster post- sterilization cooling. - Dual lid safety interlock prevents lid opening when a cycle is in progress, the chamber is pressurized, or the temperature exceeds 97°C. - Agar sterilization mode sterilizes agar, and then automatically keeps it warm to prevent it from solidifying. - One-touch lever to easily open and close chamber lid. - Agar melting mode for rapidly melting agar and then automatically maintaining it at liquid temperature, or for a hot and faster start-up. - Door-closure sensor prevents a cycle from starting unless the door is closed properly. - In-process display shows the status and the progress of sterilization cycle. The HVA-85 and HVA-110 models incorporate a 85-liter and a 110-liter chamber, respectively. They are self-contained, portable floor models mounted on caster wheels. Equipped with a chamber 16.5” in diameter, they can accommodate significantly larger loads than 50-liter models. They are ideal for the sterilization of fermenters, media, wastes, and laboratory glassware.INCLUDED: The Hirayama HICLAVE HVA-110 Economical Floor-Standing Autoclave with Cooling Fan, 110L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle Chamber Volume (more) 3850ELP 65L Sterilization Temperature Range 105°C to 138°C Chamber Dimensions Hei-Clean 21.7 x 23.6 x 19.7 in. Features - Efficiently cleans and dries various labware including beakers, bottles, flasks, and test tubes - HEPA-filtered forced air drying for thorough sanitization - 20 preset programs with capacity for 20 custom cycles - User-friendly color touch screen for easy operation and control - Lower spindle rack with 25 positions and 10 glassware holders - Purified water rinse and built-in water softener - Spray arm and conductivity monitoring - No plumbing required for autoclave operation - 65L chamber volume for large batch sterilization - The 3850ELP Recycles water for efficient operation Introducing the Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle—your comprehensive solution for laboratory sanitation and sterilization. The Hei-Dro Clean 165UC Glassware Washer efficiently cleans and dries various labware, including beakers, bottles, flasks, and test tubes, with HEPA-filtered forced air drying, customizable programs, and a user-friendly touch screen. It features a lower spindle rack with 25 positions, purified water rinse, and built-in water softener. The 3850ELP Autoclave, with a 65L chamber volume, operates without plumbing, recycles water, and offers 4 validated cycles and 16 custom cycles for versatile sterilization. Together, they ensure thorough cleaning and reliable sterilization for all your labware and research needs. INCLUDED: The Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle includes: - Hei-Dro Clean 165UC Glassware Washer - Tuttnauer 3850ELP Autoclave - Lower Spindle Rack W/ 25 Positions - 10 Glassware Holders - Upper Standard Rack - Purified Water Rinse - Spray Arm Monitoring - Autoclave Stand - Detergent: 023213791 - Neutralizer: 023213793 - Water Softener Salt - Chamber Brite: 023212803 - Printer Paper (Pkg. of 5): 023212200 - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Tuttnauer 2340M AutoclaveFeatures - Automatic shut off at the end of both the sterilization and dry (more) cycles. - A long life electro polished Stainless Steel chamber and door. - Double safety locking device prevents door from opening while chamber is pressurized. - Drain valve is located on the front, allowing for quick and easy draining of water reservoir. - Dual safety thermostat to protect against overheating. - International certifications. - 1 year parts and labor warranty. 10 year chamber warranty With the operator in mind, the colorful control panel is both intuitive and easy to use. Control panel includes a pressure gauge, timer, thermostat, and function selector. Tuttnauer manual autoclaves will compliment any healthcare facility and satisfy all of your sterilization needs. With a small foot print of only 545 x 510 x 365mm this autoclave is both efficient and compact. The internal chamber has a volume of 5 gallons (19 liters) and can fit three stainless steel trays. The long-life elecro polished chamber and door are made to last. The Tuttnauer 2340M Autoclave is designed to compliment any healthcare facility. The bright new easy-to-use panel was designed with the operator in mind. The 2340M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 13 min., Cold Start 27 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2340M Autoclave includes: - 3 Stainless Steel Trays - Tray Holder - Base Plate - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

The Systec V-series of top-loading vertical autoclaves is distinguished by its small footprint and h (more)igh chamber capacity. Result: optimal loading capacity with most standard media bottles and Erlenmeyer flasks. Features: Integrated, separate steam generator Housing, support frame and pressure vessel made of corrosion-resistant stainless steel Temperature and pressure range 140 °C, 4 bar absolute pressure LCD display and fully automatic microprocessor control Up to 25 sterilization programs Code-secured access rights for changing parameters and further safety-relevant intervention Internal memory for storing up to 500 sterilization cycles Timer for starting programs Autofill: automatic demineralized water feed for steam generation Flexible PT-100 temperature sensor Additional temperature sensor in condense exhaust Temperature holding function for liquids after program finish Special program for Durham tubes Calculation of F0 value Special program for waste sterilization with pulsed heat-up for more efficient air exhaust Water-cooled steam exhaust, thermostatically controlled Programmable automatic door-opening on completion of program Quick cooling for efficient and safe cooling of liquids Vacuum system for validatable sterilization of solids and waste materials in disposal bags Chamber dimensions (ØxD): 344 x 600 mm Nominal chamber capacity: 55 L Dimensions (HxWxD): 950 x 500 x 680 mm Weight: 115 kg

IKA Ministar 20 Control Overhead Stirrer Speed Range 0/50 to 2,000 RPM Viscosity Max. 10,000 mPas S (more)tirring Quantity Max. 15 l Features - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 10,000 mPas and volumes of up to 15 l - Continuously adjustable speed between 0/30 – 2,000 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself: Click Here to View Product Video INCLUDED: The IKA Ministar 20 Control Overhead Stirrer includes: - MINISTAR 20 control - R 300 shaft protector - Fasten screws for R 300 (2x) - H 67.60 Temperature sensor, stainless steel - Chuck Key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 20 Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)15 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLCDSpeed range0/50 - 2000 rpmViscosity max.10000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft20 Ncm Speed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm3 ±%Stirring element fasteningchuckConnection for ext. temperature sensorPT1000Temperature displayyesChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmTorque displayyesSpeed controlelectronicNominal torque0.2 NmTorque measurementtrendDeviation of torque measurement I3 ±NcmTimeryesTimer displayLCDTime setting range0 - 6000 minTemperature measuring range-10 - 350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)70 x 193 x 154 mmWeight1.56 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

Major Science Minis 150VS Power Supply New equipment in its original packaging Smart Minis 150V powe (more)r supply for electrophoresis

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW