Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace
Analytics
Brand
Tuttnauer
Supplier
Marshall Scientific
Location
Hampton - United States
Price
$5,759.00 
(ex. VAT)
This item is
for sale
State of item
new
Categories

Tuttnauer 2340M Autoclave

Marshall Scientific$5,759.00 (ex VAT)
item image

Description by the supplier

Tuttnauer 2340M AutoclaveFeatures

- Automatic shut off at the end of both the sterilization and dry cycles.

- A long life electro polished Stainless Steel chamber and door.

- Double safety locking device prevents door from opening while chamber is pressurized.

- Drain valve is located on the front, allowing for quick and easy draining of water reservoir.

- Dual safety thermostat to protect against overheating.

- International certifications.

- 1 year parts and labor warranty. 10 year chamber warranty




With the operator in mind, the colorful control panel is both intuitive and easy to use. Control panel includes a pressure gauge, timer, thermostat, and function selector.


Tuttnauer manual autoclaves will compliment any healthcare facility and satisfy all of your sterilization needs. With a small foot print of only 545 x 510 x 365mm this autoclave is both efficient and compact.


The internal chamber has a volume of 5 gallons (19 liters) and can fit three stainless steel trays. The long-life elecro polished chamber and door are made to last.




The Tuttnauer 2340M Autoclave is designed to compliment any healthcare facility. The bright new easy-to-use panel was designed with the operator in mind. The 2340M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 13 min., Cold Start 27 min. Cycle times are approximate and may vary depending on instrument loads.

INCLUDED:

The Tuttnauer 2340M Autoclave includes:

- 3 Stainless Steel Trays

- Tray Holder

- Base Plate

- Power Cord

- Operator's Guide

- 3 Year Manufacturer's Warranty

Product details
Chamber Volume19 L (5 gal)
Standard Cassettes Capacity2 full / 2 half
Number of Trays3
Tray Dimensions (D x W x H)415 x 170 x 20 mm
Overall Dimensions (D x W x H)545 x 510 x 365 mm
Chamber Dimensions230 x 470 mm
Weight85 lbs
Electrical Requirements120V, 50/60Hz, 12A, 1400W
About QuestPair

QuestPair matches professionals in research and industry with manufacturers, suppliers and resellers of scientific products. Companies and organisations can easily sign up for an account and showcase their laboratory equipment and other products on the marketplace. It is possible to list both new as well as used equipment. QuestPair features a variety of equipment for the physical, chemical and life sciences such as spectrometers, balances, centrifuges, testing devices, medical devices, incubators, microfluidics kit, heaters, coolers and other specialist instruments.

Related items:
Yamato SM-820 Large Capacity Sterilizer with Dryer 80L, 100-120V-cover
Yamato SM-820 Large Capacity Sterilizer with Dryer 80L, 100-120V

Yamato SM-820 Large Capacity Sterilizer with Dryer 80L, 100-120V Operating Temperature Sterilization (more) 105°C to 135°C Operating Temperature Drying 135°C to 150°C Internal Capacity 80L Features - Interactive keypad input allows committing sterilization settings to memory - 7″ interactive touch screen - Suitable for protein modification at the maximum operating temperature of 135°C - Easy settings and operation modes for a multitude of sterilization process - Increased safety and function list including forced cooling and memory functions - Equipped with multiple safety locking mechanism for the lid - Comes with large capacity (11L) heat resistant stainless steel container - Alarm buzzer sounds when high or low pressure error occurs "Large capacity, high performance, fully automatic 80L steam sterilization from start to finish with high pressure steam sterilization and drying steps. Interactive keypad input (touch panel) allows committing sterilization settings (time & temperature) to memory 7″ interactive touch screen Suitable for protein modification at the maximum operating temperature of 135°C. Easy settings and operation modes for a multitude of sterilization process. Increased safety and function list including forced cooling and memory functionsEquipped with multiple safety locking mechanism for the lid. Comes with large capacity (11L) heat resistant stainless steel container. Alarm buzzer sounds when high or low pressure error occurs. Sterilizing temp. range 105 to 135°C. Drying temp range 135 to 150°C." INCLUDED: The Yamato SM-820 Large Capacity Sterilizer with Dryer 80L, 100-120V includes: - 2 pcs. stainless steel mesh basket (⌀344 x D300 mm) - Drain board x 1, drain bottle x 1, chemical indicator 1 set, filter x 1, droplet tray x 1 - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

$16,145.00 ex VAT
United States
autoclaves or sterilizers
Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V-cover
Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V

Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V Internal Capacity 300L Temperature Range A (more)mbient +10-210°C Temperature Accuracy ±1°C (at 210°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Programmable forcedl convection 300L dry heat sterilizer with independent overheat prevention device. High precision controller with improved display visibility and operability. Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information. Maximum 99 steps, 99 patterns, repeat operation. Easy sample data collection with cable port. Temp setting range ambient +10~210°C.INCLUDED: The Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

$7,727.00 ex VAT
United States
autoclaves or sterilizers
People are watching right now:
WATERS ACQUITY UPLC Online SPE Manager 186015012IVD Solid Phase Extraction LC/MS-cover
WATERS ACQUITY UPLC Online SPE Manager 186015012IVD Solid Phase Extraction LC/MS

Manufacturer: WATERS Model: ACQUITY UPLC Online SPE Manager (OSM) P/N: 186015012IVD S/N: J120SM002Z  (more)Description: WATERS ACQUITY UPLC Online SPE Manager OSM is a component necessary for Sample Preparation and Analysis. Due to Online SPE Manager OSM UPLC Mode is possible. Online SPE can be bypassed to allow UPLC operations. Waters the first UPLC-pressure enabled, analytical scale on-line SPE system, the time required for preparation and analysis, once measured in hours, has been reduced to minutes. This technology provides advanced data management capabilities to help improve analitical workflow. Can be used with a range of Waters high-performance optical and mass detectors - your laboratory will have the flexibility to analyze a wide variety of chemical compounds.  Key benefits for laboratory operations: - Quality - Automated sample processing ensures reproducible results by eliminating manual variability.- Throughput - sample analysis and preparation times reduced by up to 90%. Accomodate more samples and run them in less time.- Flexibilty - Functions as an on-line SPE system and a stand alone UPLC system with multiple optical and mass spectrometer detection options. Maximize laboratory asset utilization.- Cost - the use of significantly smaller sample volumes can reduce shipping costs from remote locations.- Productivity - reduces sample processing time. Scientists can allocate more time to other laboratory tasks. On-line SPE/LC/MS for the detection of: - endocrine disruptors- fungicides- pesticides- personal care products- pharmaceuticals- soft drink additives- veterinary drug residues Specifications: Power: 95-240 V 350 VA 50/60 Hz Items delivered: - WATERS ACQUITY UPLC Online SPE Manager (OSM) Condition: The whole item is in excellent cosmetic as well as technical condition. It is 100% functional tested, runs as intended and is ready to be applied.

€12,000.00 ex VAT
€14,280.00 incl. VAT if applicable
Germany
general laboratory equipment other
Disclaimer: QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is“ basis with no guarantees of completeness, accuracy, usefulness or timeliness.

Customer Service

Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.

We are available to assist you Mon-Fri, 10am - 5pm CET.

+31 (0) 73 7114717
[email protected]