Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul

Yamato SM-301 Sterilizer with Dryer 32L, 115V Operating Temperature Sterilization 105°C to 128°C Op (more)erating Temperature Drying 150°C to 180°C Internal Capacity 32L Features - Automatic operations from sterilization to drying carried out with an interactive key input system - Quick sample drying capability makes samples ready to use right after sterilization - Drying temperature can be set according to sample material, quantity, etc. - Timer range from 1~999 hours - Drain bottle water level can be quickly confirmed on the front panel level indicator - Drain valve located in front for easy access - Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy - Self-diagnostic functions make operation safer and error recovery quicker - Condensation collector neutralizes high temperature exhaust steam safely High performance, fully automatic 32L standard steam sterilization from start to finish with high pressure steam sterilization and drying steps. Automatic operations from sterilization to drying carried out with an interactive key input system. Quick sample drying capability makes samples ready to use right after sterilization. Drying temperature can be set according to sample material, quantity, etc. Timer range from 1~999 hours. Drain bottle water level can be quickly confirmed on the front panel level indicator. Drain valve located in front for easy access. Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy. Self-diagnostic functions make operation safer and error recovery quicker. Condensation collector neutralizes high temperature exhaust steam safely. Sterilizing temp. range 105 to 128°C. Drying temp range 150 to 180°C. INCLUDED: Yamato SM-301 Sterilizer with Dryer 32L, 115V includes: - 2 pcs. stainless steel mesh basket (⌀266 x D204 mm) - Drain board, drain bottle, condensation collection container with magnetic bracket - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex SuperPette Autoclavable Pipettor, 100-1000ulThe new SCILOGEX SuperPette fully autoclavable  (more)digital pipettors have an excellent ergonomic and ultralight design providing effortless, ergonomic, accurate and precise pipetting experience. In addition, the volume lock helps protect from accidental volume change. The clear digital display is centrally located, for the left- and right-handed users. UV and chemical resistant.Product Features - One handed volume adjustment and volume lock - Autoclavable, digital, ergonomic, ultralight, and accurate - UV and chemical resistant - Display is centrally located, for ambidextrous use. - Compatible with universal pipette tips of up to 1000 mL - Built with a calibration tool, so your lab can save time and cost by maintaining the pipettor in-house - Suitable for forward or reverse pipetting Click Here to View Product Video INCLUDED: The Scilogex SuperPette Autoclavable Pipettor, 100-1000ul includes: - Two Year Manufacturer's Warranty

Hirayama HICLAVE HV-50 Floor-Standing Autoclave, 50L, 120V Chamber Volume 50L Sterilization Temperat (more)ure Range 105°C to 135°C Chamber Dimensions 11.8" x 28.0" (30 cm x 71 cm) Features - Space-saving design with lid opening upward. - Programmable auto-start for initiating a cycle up to 1 week later. - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C. - Automatic air purging by a microprocessor prevents over-pressurization during a cycle. - One-touch lever to easily open and close chamber lid. - Programmable rate of steam exhaust. - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly. The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models.INCLUDED: The Hirayama HICLAVE HV-50 Floor-Standing Autoclave, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Boekel Scientific 25515016 Cement Autoclave The Cement Autoclave consists of a welded ASME certified (more) steel cylinder with a bolted cover mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing. The unit is designed to handle pressure in the 60-350 psi (0.4 -2.4 MPa) range and consists of steam vessel, pressure regulator, pressure gauge (0-600psi), air vent valve, power switches, and a safety pop valve set at 350 psi. All components are pressure tested and designed to meet the highest safety standards. The autoclave consists of a welded steel cylinder with bolted cover, mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing. The steel cylinder is fitted with a high temperature gasket and a heavy cover held in place by 16 cap screws bearing upon washers. A T-Handle wrench supplied with the autoclave may be used to tighten the nuts gradually and uniformly to make a leak-proof assembly. The cylinder assembly is designed for a safe working pressure of 525 PSIG, or one and one-half the maximum working pressure. A safety valve set to release at 350 PSIG is provided for protection and modification is not recommended for safe operation. A dial pressure gage indicates the steam pressure in PSIG. Temperature readings are taken with a No. NP22507 thermometer ASTM #2F, which is placed in the thermometer well provided in the cylinder cover. An air-vent valve allows the escape of entrapped air during the early part of the heating period and releases any steam pressure remaining at the end of the cooling period. The autoclave is heated by two electric heaters attached to the cylinder. The heating unit is controlled from a switch panel on the control box. The control box houses the pressureregulator. A main toggle switch controls the entire electrical circuit including the automatic regulator. Separate on-off toggle switches, in series with pilot lights, control the current to the two heating elements. Switch functions are indicated on the switch panel.INCLUDED: The Boekel Scientific 25515016 Cement Autoclave includes: - Wrench, Thermometer, and 5 Gaskets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Electro-mechanical lid lock system Dual interlock mechanism Air removal time setting Effective capac (more)ity: 50 L Chamber size (Ø x H): 300 x 710 mm Operation mode: 4 modes (LIQUID with warming, LIQUID without warming, SOLID, DISSOLUTION), one memory for each mode Temperature setting range sterilization: 105°C – 126°C (Variable) Temperature setting range dissolution: 60°C – 100°C (Variable) Temperature setting range warming: 45°C – 60°C (Variable) Time setting range sterilization: 1 min – 250 min, Remaining time is displayed Time setting range dissolution: 1 min – 60 min, Remaining time is displayed Time setting range warming: 20 h (fixed) Time setting range auto-start timer: Program autoclave to start 1 min to 1 week later Exhaust setting: 4 levels from 0 to 3 (Variable), In SOLID mode, it is fixed to level 3 (forced cooling) Exhaust setting: 0% – 100%, Valve opening degree setting for LIQUID mode Maximum working pressure: 0.26 MPa Thermometer: 5°C – 137°C Pressure gauge: 0 MPa – 0.4 MPa Alarms, error display: Low water heating, Temperature sensor wire disconnection, Over-temperature, Over-cool, Over-pressure, Abnormality in lid opening / closing lever lock Dimensions (WxDxH): 547 x 532 x 1045 mm Weight: 57 kg

The autoclave is suited as a universal autoclave for demanding sterilization tasks. The autoclave is (more) intended for use in  the medical field, e.g. in general physician and dental practices. The autoclave is not approved for the sterilization of liquids. Programs Universal Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 5:30 min, Operating time: 30 min, Drying: 20 min Quick program B: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 5:30 min, Operating time: 30 min, Drying: 10 min Quick program S: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 3:30 min, Operating time: 30 min, Drying: 5 min Gentle program: Sterilization temperature: 121°C, Sterilization pressure: 1.1 bar, Sterilization time: 20:30 min, Operating time: 45 min, Drying: 20 min Prion program: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 20:30 min, Operating time: 45 min, Drying: 20 min Chamber dimensions (⌀xD): 250 x 350 mm Capacity: 17 L Dimensions (HxWxD): 490 x 425 x 620 mm Weight: 55 kg

RUDOLF ERNST torque meter for screw caps range: up to 4 Nm (35 Torque Inlbs) Rotation in 2 direction (more)s torque meter

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW