Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul

Yamato SM-501 Sterilizer with Dryer 47L, 115V Operating Temperature Sterilization 105°C to 128°C Op (more)erating Temperature Drying 150°C to 180°C Internal Capacity 47L Features - Automatic operations from sterilization to drying carried out with an interactive key input system - Quick sample drying capability makes samples ready to use right after sterilization - Drying temperature can be set according to sample material, quantity, etc. - Timer range from 1~999 hours - Drain bottle water level can be quickly confirmed on the front panel level indicator - Drain valve located in front for easy access - Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy - Self-diagnostic functions make operation safer and error recovery quicker - Condensation collector neutralizes high temperature exhaust steam safely High performance, fully automatic 47L standard steam sterilization from start to finish with high pressure steam sterilization and drying steps. Automatic operations from sterilization to drying carried out with an interactive key input system. Quick sample drying capability makes samples ready to use right after sterilization. Drying temperature can be set according to sample material, quantity, etc. Timer range from 1~999 hours. Drain bottle water level can be quickly confirmed on the front panel level indicator. Drain valve located in front for easy access. Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy. Self-diagnostic functions make operation safer and error recovery quicker. Condensation collector neutralizes high temperature exhaust steam safely. Sterilizing temp. range 105 to 128°C. Drying temp range 150 to 180°C. INCLUDED: The Yamato SM-501 Sterilizer with Dryer 47L, 115V includes: - 2 pcs. stainless steel mesh basket (⌀266 x D315 mm) - Drain board, drain bottle, condensation collection container with magnetic bracket - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Tuttnauer 3850EP Digital Autoclave, 230V Chamber Volume 65L Sterilization Temperature Range 105°C t (more)o 137°C Chamber Dimensions 15 x 20 in. (38.1 x 50.8 cm) Features - Designed to autoclave wrapped, unwrapped, glass and tools. - Not suitable for liquids - Sterilization time up to 99 minutes - Temperature selection from 105°C to 137°C - Includes trays - In-line particle filter to protect valves - Electronic pressure and temperature sensors - Low Water Alarm - sounds when reservoir needs to be refilled - Standby Heating - keeps chamber warm for quicker cycles - Built-In Printer - Provides a printed summary at the end of each cycle, documenting temperature, elapsed sterilization and drying time, selected cycle number, real time and date, as well as any errors or interruptions that may occur during the cycle - Chamber Volume – 65L - Power – 230V, 1 Phase (60Hz) NEMA 6-15 The Tuttnauer 3850EP Digital Autoclave, 230V is designed with superior productivity in mind, offering monitoring, recovery, standard printing and a wide range of programmable and customizable options for large capacity operation. An easy-to-use, single touch control system increases productivity and rapid cycles optimize availability of ready-to-use sterile instruments. The long-life electro polished chamber and door are also made to last. Click Here to View Product Video INCLUDED: The Tuttnauer 3850EP Digital Autoclave, 230V includes: - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 20-200ul Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 0.60/0.80/1.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 10-100ul Volume Range 1-5mL Adjustable or Fixed Volu (more)me Adjustable Volume Accuracy (±%) 0.50/0.60/0.70 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 10-100ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HV-25 Floor-Standing Autoclave, 25L, 120V Chamber Volume 25L Sterilization Temperat (more)ure Range 105°C to 126°C Chamber Dimensions 9.4 x 21.6 in. (24 x 55 cm) Features - Space-saving design with lid opening upward. - Programmable auto-start for initiating a cycle up to 1 week later. - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C. - Automatic air purging by a microprocessor prevents over-pressurization during a cycle. - One-touch lever to easily open and close chamber lid. - Programmable rate of steam exhaust. - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly. The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models. INCLUDED: The Hirayama HICLAVE HV-25 Floor-Standing Autoclave, 25L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HV-110 Floor-Standing Autoclave, 110L, 208/220/240V Chamber Volume 110L Sterilizat (more)ion Temperature Range 105ºC to 135ºC Chamber Dimensions 16.5 x 31.3 in(42 x 79.5 cm) Features - Space-saving design with lid opening upward - Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C - Agar melting mode for melting agar and maintaining it at liquid temperature, or for a hot, faster start-up - One-touch lever to easily open and close chamber lid - In-process display shows the status and the progress of sterilization cycle - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models.INCLUDED: The Hirayama HICLAVE HV-110 Floor-Standing Autoclave, 110L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

This listing is for a Roche LightCycler II Thermal Cycler Parts Only

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Labconco CentriVap Cold Trap Brushed, Stainless Steel and Powder-Coated Steel Exterior Illuminat (more)ed Temperature Graph with Endpoint Indication (Operating temperature of -40° C) HCFC-Free Refrigerant System 1/3 hp Compressor (Reaches -50C in less than 30 min.) 4-liter, Stainless Steel Collector Acrylic or Stainless Steel Lid (with 2 Quick-Disconnect fittings for connection to a CentriVap Concentrator) Stainless Steel Drain Port (with corrosion-resistant, nylon valve) INCLUDED: The Labconco 7811020 CentriVap Cold Trap, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 25 x 7ml Adapters, Cat. # 022638700 New in box Eppendorf 25 x 7ml adapters (Cat. # 0226387 (more)00) for rectangular 400ml buckets for the Eppendorf 5810 and 5810R centrifuges. This is a two piece set, and the adapters are new in packaging. The Eppendorf 25 x 2.6-5ml Adapters, Cat. # 022638700 arediscounted, brand-new, and includes a 6 Month Full Parts and Labor Warranty.