Hirayama HICLAVE HV-110 Floor-Standing Autoclave, 110L, 208/220/240V

Priorclave PS/QCS/SV100 Top Loading Autoclave This was removed from a university lab where it was su (more)rpus to requirements. The unit powers up but has only been partially tested as it requires a steam generator, which we do not have. It is in good cosmetic condition with minor marks.

Rodwell Ensign 125 Autoclave This item was removed from a university lab where it was surplus to req (more)uirements. The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.The item is due for a service, and no further testing was conducted. The previous client has stated it was in working order prior to removal. Specifications:- Model: Ensign 125 - Serial No.: 2295 - M24 Controller

Priorclave Autoclave Type - PS/MUA/C60 Lab This item was removed from a university where it was surp (more)lus to requirement. It is in good cosmetic condition and powers on, however it is not in working condition and is listed as Spares/Repair. It has a board/display fault.

Benchmark Micro Bead Sterilizer w/ Glass Beads Benchmark’s Micro Bead Sterilizer is ideal for the st (more)erilization of small research tools (forceps, scissors, etc.). When the chamber is filled with the included glass beads, high temperatures (up to 300C) can be used to eliminate the presence of bacteria, spores and other microorganisms. Chamber temperature can be viewed on the large LED control panel and conveniently adjusted with the control knob. The outer casing of the unit stays cool to the touch, even when the sterilizer is used all day. The supplied safety cover can be placed over the opening to conserve energy and reduce the heating/ramping rate. The Micro Bead Sterilizer does not use gas, flame or chemicals and is safe for use in hoods. With adjustable temperature, the application range of the sterilizer can also be exanded into incubations and the decontamination of plastic objects/tools. This product is designed for RESEARCH USE ONLY. Not intended for clinical use. INCLUDED: The Benchmark Micro Bead Sterilizer w/ Glass Beads includes: - Glass Beads, 150g - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 0.1-2.5ul Volume Range 0.1-2.5uL Adjustable or Fixed (more) Volume Adjustable Volume Accuracy (±%) 2.50/3.00/12.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 0.1-2.5ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V Internal Capacity 162L Temperature R (more)ange Ambient +5-260°C Temperature Accuracy ±1°C (at 260°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Programmable natural convection 162L dry heat sterilizer with independent overheat prevention device. High precision controller with improved display visibility and operability. Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information. Maximum 99 steps, 99 patterns, repeat operation. Easy sample data collection with cable port. Temp setting range ambient +5~260°C..INCLUDED: The Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This New Brunswick Scientific Innova 4330 Refrigerated Shaking Incubator was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and the incubator and shaker have both been tested (digital thermometer not included). It is in full working order. It is in reasonably good cosmetic condition, with signs of use. Internal Dimensions: 87 x 56 x 34 cm

Orbit Marine Div AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it w (more)as surplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

This was removed from a university lab where it was surplus to requirements. The unit trips the test (more)ing room electrics when switched on. Upon investigation, we think the fault may have to do with heating element. It is sold for spares/repairs.

Application: Automatic mass comparator AK-4/100 series is intended to automatic determination of wei (more)ghts mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/100 is designed to compare weights from 10 g to 100 g. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

IKA VACSTAR Lite Vacuum Pump Final Pressure Without Gas Ballast 9 mbar Pump Rate Max. (50/60Hz) 16.6 (more)7 l/min Input Pressure 10 to 1,030 mbar Features - Speed-controlled, 2-cylinder vacuum pump for universal dry and oil-free vacuum applications - Chemically resistant membranes with ultimate vacuum pressure of 9 mbar - Compact design saves bench space and allows placement behind other lab equipment - Seamless communication with vacuum controllers and circulators for synchronized processes - Integrated valve cleaning function extends system life and reduces maintenance costs - Quiet operation with a noise level of 54 dB(A) for a more comfortable lab environment - USB-C interface and analog input for enhanced connectivity and control - Lightweight and durable with aluminum-cast and thermoplastic polymer housing - Recommended use of the VSE 1 emission condenser for safety and clean ambient air The VACSTAR lite is a versatile, speed-controlled, 2-cylinder vacuum pump designed for universal dry and oil-free vacuum applications. Featuring chemically resistant membranes and an ultimate vacuum pressure of 9 mbar, it is well-suited for a wide range of laboratory tasks. Whether used with rotary evaporators, laboratory reactors, temperature chambers, centrifuges, or classic Schlenk lines and filtration systems, the VACSTAR lite delivers high operating efficiency and flexibility. Its robust construction ensures long-term reliability with minimal maintenance, making it an indispensable tool for standard laboratory workflows. Compact and thoughtfully designed, the VACSTAR lite fits easily behind other lab equipment, optimizing bench space while remaining accessible. Seamless integration with devices like vacuum controllers and circulators enables synchronized operations, enhancing process control and system performance. When paired with the VC 10 lite vacuum controller, the pump benefits from an integrated valve cleaning function that removes solvent residues, extending the vacuum system's lifespan while minimizing maintenance costs. For added safety and environmental protection, the optional VSE 1 emission condenser effectively captures escaping solvent vapors, maintaining clean air and safeguarding users.INCLUDED: The IKA VACSTAR Lite Vacuum Pump includes: - Vacuum Hose, 1m - Silencer - Connecting Cable - Warranty Card - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty