Whitley Automatic Spiral Plater WASP with Vacuum Source 602

Statebourne Crogenics Biostor 5 Liquid Nitrogen Dewar This was removed from a university lab where i (more)t was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Internal Dimensions are: D 70cm x W 40cm. It has 5 storage containers each with 9 draws & 1 storage container with 7 draws.

Miltenyi Biotec Auto Macs Pro Separator System Lab This system was removed from a university lab whe (more)re it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This system does not include the required Fluid Bottles, which are available for purchase from the manufacturer's website.

Perkin Elmer Janus G3 Standard Varispan Deck Liquid Handler This item was removed from a university  (more)laboratory where it was surplus to requirements. It powers up when switched on and is in good used cosmetic condition. Further testing has not been conducted, but we were informed they were in working condition prior to removal. Includes a deck plate for 24 microplates. WinPrep software is available for setup with a PC upon customer request. Specifications.- Model: Janus G3 - Serial No.: JA2049N3797

Thermo Scientific Multiskan FC microplate reader. The wavelength range is 340 to 850 nm, which allow (more)s a variety of applications from enzymatic kinetic studies to Lowry assays. Accuracy ± 1% for 0.3–3 Abs at 405 nm, ± 2% for 3–4 Abs at 405 nm. Eight-position filter turret with three standard filters (405, 450 and 620 nm) pre-installed. Slow, medium or fast linear agitation. Fast processing reading in 6 seconds. Automatic calibration and self-diagnosis. Quick access to the most used protocols. The internal software contains qualitative and quantitative calculations for simple, dual and kinetic measurements. USB interface User manual. Specifications

Select Incubat reconditioned incubator. Volume 36 L. Ventilation by natural convection. Adjustable  (more)from ambient temperature +5 ºC up to 80 ºC. Regulation and digital reading of temperature and time of operation. Stability ± 0.1 ºC. Uniformity ± 0.5% to temperature of work. Error from setpoint ± 2 % at working temperature. Resolution 0.1 ºC. Interior door of tempered glass. It is supplied with two trays and four guides. They do not have RS232 output .Thermostat adjustable.

Elga PureLab Option with DV35 Reservoir This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Hoefer TE77X Semi-Dry Transfer Unit Transfer Area Up to 21 x 26 cm Maximum Power Settings 30 V, 500 (more) mA, 15 W Maximum Gel Capacity 12 Mini Gels Features - Included safety circuit breaker—limits voltage and current from the user's power supply, preventing electrical damage to the transfer unit - Requires minimal current—does not generate the excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent buildup of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE77X Semi-Dry Transfer Unit is an efficient and robust system designed to transfer proteins from polyacrylamide gels in under an hour, using minimal buffer. With a spacious 21 x 26 cm transfer area, this unit can accommodate up to 12 mini gels simultaneously, allowing for high-throughput transfers in less time. Engineered to prevent excessive heat buildup, the TE77X supports up to two gel layers being transferred at once without risk of drying out or halting the transfer process. This unit features durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent protein transfer. The vented electrode design helps prevent bubble buildup, which can interfere with transfer quality, while the included safety circuit breaker protects the transfer unit from electrical surges. Equipped with platinum-coated titanium anodes and stainless steel cathodes, the TE77X is built for longevity and reliability. With minimal buffer requirements, it reduces reagent costs and preparation time, making it a cost-effective choice for any lab focused on efficiency and precision. INCLUDED: The Hoefer TE77X Semi-Dry Transfer Unit includes: - Molded Base with Platinum-Coated Titanium Anode and High Voltage Leads - Hinged Lid with Stainless Steel Cathode - Blotting Paper (21 x 26 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (23 x 27.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Beam scales C315.4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the C315.4P2 scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales C315.4P2 series is manufactured in mild steel powder coated version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE C315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

SCILOGEX SCI550-Pro LCD Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Se (more)nsor & Sensor StandThe SCI550-Pro is one of the most technically advanced hotplate-stirrers in the marketplace. With independent back-lit LCD displays for both heat and stirring functions and PID technology. The SCI550-Pro controls temperature at +/- 1ºC. It also incorporates a DC brushless (spark free) motor for extremely long life and excellent performance. It is widely used in chemical synthesis, physical and chemical analysis, biopharmaceuticals etc. Combining with glass ceramic work plate, brushless DC motor and external temperature sensor, the work plate temperature is optimized up to 550°C.Product Features - Easy-to-read independent back-lit LCD displays for heat and stirring. - Digital speed controlling, max. speed at 1500rpm - Built-in PID controller ensures safe heating of the medium with overheating protection. - Heat only, stir only or heat and stir together functions. - Max. heating plate temperature 550°C - Glass ceramic work plate provides excellent chemical resistant performance and most efficient heat transfer. - RS232 for remote control, providing PC control and data transmission. - Low temperature stability - External temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C. - Accessory PT-1000 stand available (built in stand mount) - Electronic speed control for constant speed even during changes in load - Maintenance free DC brushless motor for long life and more stirring power - Two rotating knobs enable easy adjustment of speed and temperature. - High magnetic adhesion - “HOT” warning will flash when the work plate temperature is above 50°C even when the hotplate is turned off. Click Here to View Product Video INCLUDED: The SCILOGEX SCI550-Pro LCD Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Sensor & Sensor Stand includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty