Radwag MPS 2000 Weighing Module

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)when we tried to connect it to a PC with software we had some issues. (Software not included). We installed software on a test PC and it did seem to connect to the RG3000, but it is stating that there is a Fatal Hardware Malfunction. The machine can't be used until the distributor has service it. After starting it again we got another error: Thermistor is Open. We have removed the casing to check inside the unit and cannot find any obvious issues. There is an LCD panel inside that is showing 'TEMP OVER 140/127.5/2.1/152.0'. This displays as soon as the unit is switched on, so it looks like there is some sort of temperature error happening. There are 4 x PTC EPCOS C810 Thermistors in the power supply section of the unit. It's possible that there is a fault with at least one of those. It is in otherwise reasonable cosmetic condition with marks from use, but is sold for spares/repairs The item holds up to 72 x 0.1ml strip tubes.

Wallac 1450 Microbeta Trilux Liquid Scintillation The system tripped ad RCD on the main supply durin (more)g testing. The internal PSU has shorted. It is sold for spares/repairs. Included are; Microbeta V4.6 Protocol Disk1450 Microbeta Trilux Main Program 4.6 Comes with:-Belinea 15" Monitor - Powers onHP KeyboardLogitech MouseHP Vectra VL5/166 MMX Series 5 DT - PC Does not power on. HDD removed. We left it with the system in case it has useful PCI cards.

A laboratory oven with an exceptional quality/price ratio! 100% Made in Italy and with all accessori (more)es already included as standard.Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-N 52 FALC Natural Convection

The series of MUYA electromagnetic high resolution modules is designed to be incorporated into custo (more)mer’s weighing systems. A new generation’s MUYA 5 ultra-microbalance module is designed to fulfill our customers’ high expectations regarding mass measurements carried out with the greatest precision. The system of internal adjustment improves the quality of work even more by affecting measurements results. Operation of MUYA electromagnetic high resolution module is based on an electromagnetic digital converter. Compact design and inbuilt electronics ensure great possibilities when it comes to module's adaptation capabilities. Due to high precision of a measurement it is recommended to build the module into the customer's device (e.g. anti-draft chamber), thus limiting ambient conditions influence. Power supplier for MUYA weighing module comes standard.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Raypa BOD-2 water/oil bath. 5 L capacity. Temperature range: ambient +5º to 200º C. Stability ± 0.4º (more) C, homogeneity ± 2º C. Digital with 1 ºC resolution. Timer up to 99.5 h. Drain tap. Stainless steel. Safety thermostat. Dimensions 12 x 29.5 x 14 cm. User manual. Raypa BOD-2 thermostatic baths have digital temperature regulation and reading by microprocessor with P.I.D. action. and a PT100 temperature probe, which gives them high precision. They also have a safety thermostat with manual reset that disconnects the equipment when activated.

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. The 'D' versions, 'PBD' and 'PBD C' models, are equipped with a max 1.1 bar pressure pump only, with a max. (pressure) of 32 L/min. The 'PB' and 'PB C' models are equipped with pressure and suction pumps, mac 0.7 bar and 0.4 bar respectively, with a max. (pressure) of 25 L/min. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PBD C model - For tanks of 320 mm deep - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

This listing is for 1 of 5 Spectroline Es-160/FBE UV Lamp. The unit is in full working condition an (more)d is ready for immediate release. The Spectroline Es-160/FBE UV Lamp is a handheld, long-wave UV lamp designed for various applications, including leak detection, curing, and inspection. Here are some key features and specifications: Tube: 6W, long-wave UV-A (365nm) Voltage: 120V/60Hz Dimensions: 63.5 mm (height), 3-1/4"W x 10"L x 4-1/4"H Handle: Detachable

VACUUBRAND MZ 1C Chemistry Diaphragm Pump Ultimate Vacuum 12 mbar / 9 torr Maximum Pumping Speed 0.5 (more) cfm at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - Convenient, quick and simple to use due to the top mounted power switch. - Optimized vacuum even with gas ballast for continuous purge. - Whisper quiet and very low vibration. - Maintenance-free drive system and proven long diaphragm life. Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE-sandwich diaphragms increase reliability and extend operating life. The MZ 1C pump is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. It features slim design for space-saving installation and good vacuum performance. A manual vacuum regulator valve with dial gauge for adjustment of pumping speed and ultimate vacuum is available as accessory. Two-stage chemistry-design diaphragm pumps are an excellent choice for continuous, oil-free pumping of gases at medium vacuum requirements. In contrast to water jet pumps, they do not consume water and therefore do not produce any contaminated waste water. Typical applications are rotary evaporators, gel dryers, filtrations and many other lab applications. The MZ 1C is a powerful pump for smaller vacuum apparatus enabling continuous pumping of solvent vapors. It´s a compact, stand alone pump with low ultimate vacuum. If the process requires atmospheric condensation of pumped vapors or electronic vacuum control, we recommend the pump families based on the MZ 2C NT or MD 1C. INCLUDED: The VACUUBRAND MZ 1C Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW