Radwag MAS.1.21 Weighing Module

Cold light source SCHOTT KL1500 COMPACT 150 watt halogen cold light source Developed and designed fo (more)r applications in machine vision, stereomicroscopy and macroscopy. Wide range automatic switching power supply that covers a range of 85 to 264 volts between 47 and 63 Hz

This MP FastPrep - 24 Sample Preparation System was removed from a university lab where it was surpl (more)us to requirements. The item powers on and is in a reasonably used cosmetic condition, unable to test further due to a 'Cancel Error' "Improper closing of the dome will be indicated by display Cancel" Due to this error, this item is sold as Spares or Repairs.

Stuart RE300 MS Rotary Evaporator with Ika HB-250 water bath. Speed range from 20 to 190rpm. Inducti (more)on motor. Waterbath with capacity of 3.5 litres and temperature range from ambient to 250 ºC. PTFE glassware included: vertical coil condenser, vapour duct and evaporation and collection flasks. User manual. Stuart RE300MS rotary evaporator with Ika HB-250 bath and complete glassware.

Laboratory turnkey Bioer GeneLab. Integral solution that enables the reduction of costs and commissi (more)oning times. Includes areas of separate work with the photo the paneling tight sandwich-type steel floor PVC a heat-sealed bag, seals type, scotland, lighting, furniture, pressurization positive/negative for contamination control, air filtration, germicidal light, locks between rooms, for transfer of samples, pre-installation of electrical systems, hvac, telephony and the internet. Different configurations to choose suitable for laboratories of molecular biology and cell culture, among others.

Muffle furnace Selecta SELECT HORN. Chamber capacity 9 L. Adjustable temperature up to 1150 °C. Accu (more)racy ±1 °C. Resolution: 1 digit. Digital electronic temperature and time controller that allows programming a ramp of up to 8 segments or two of 4 segments. Heating elements evenly distributed. Fiber-ceramic insulation. Up-and-over door with disconnection of operation in opening. It has some flaws in the paint that do not prevent its operation. Dimensions: inside 15*20*30 cm, outside 58*59*65 cm; 70KG. 3000 W. User manual. The Selecta Select-Horn electronic muffle furnace has an interior enclosure made up of high-quality refractory plates and evenly distributed heating elements with special long-lasting high-melting point wire. Excellent thermal insulation and reduced consumption. Quick temperature recovery when opening and closing the hinged door.

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the shakers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems.

Explosion-proof laboratory freezer with plastic drawers Dimensions (WxDxH): 597 x 615 x 820 mm Capac (more)ity: 129 l Temperature range: -9°C to -26°C

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Heidolph 036304390 Overhead Stirrer Impeller, BR 10 Cross-Blade Due to its blade dimensions, the cro (more)ss-blade impeller BR 10 is ideally suited for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 100 mm, ideal ground clearance: 5 mm, ideal filling level: 100 mm, and ideal volume: 800 ml. The cross-blade impeller BR 10 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036304390 Overhead Stirrer Impeller, BR 10 Cross-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty