Radwag MAS 220 Weighing Module

This Matrx by Midmark VIP 3000 Isoflurane Vaporiser was removed from a university lab where it was s (more)urplus to requirements. The unit has not been tested but is in good cosmetic condition and includes its original packaging.

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a universit (more)y lab where it was surplus to requirements. The system is in good cosmetic condition with marks from use. All modules power up. We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes. The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working. The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal. We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts. The system is made up of the following; 1 x Matrix Hydra IICat no. 109610 1 x Matrix 2 Position Stage 1 x Apogent Discoveries Matix Hydro Pump ModuleThe unit powers on with all 3 Fills working. 1 x Matrix P1 Control Box 1 x Innovadyne 1-Channel NanofillThe unit powers up. 1 x Grant Instruments Type MS1The unit powers up. Dell Laptop with Microsoft MouseModel - PP04XHydra II-Plus-One Control Software Version 3.1.3 InstalledThe unit powers up and the software runs. Software Discs:Matrix Hydra II-Plus-One Control Software Version 3.1.3Matrix Hydra II-Plus-One Control Software Version 3.1.2SuperLogics LE Software Suite Rev 2.92 x Socket Installation discs Various tubing and accessoriesOperating instructions

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)holds mains water pressure but has an issue with evaporation temperature being high, and/or and issue with auger rotation. It likely requires an NTC sensor. It is sold for spares/repairs

- Diameter of support rod: 12 mm. - Dimensions (W x D): 300 x 430 mm. - Height: 600 mm. - Max. load: (more) 10 kg.

Thermoregulation and thermal stability at their best - The Auto-Tuning thermoregulation system guara (more)ntees excellent thermal homogeneity and stability (±0.5°C) - Ecological cooling system and low operating costs - Selectable incubation temperature and working range from 3 to 50°C - Uniform temperature thanks to VELP ventilation technology - 3-digit DIGITAL DISPLAY, resolution 0.1°C - Transparent internal door for observation of the sample without temperature alterations Reliable and easy to control - Customizable lighting cycle timer - Equipped with 2 illuminated shelves (30,000 lux / shelf), each with six LED bars mounted horizontally under the shelf - Volume of 169 liters net - Internal sockets to power devices - Intuitive digital interface, with three buttons for easy setup of the instrument - Constant monitoring according to GLP (Good Laboratory Practice) - Adjustable recording time (in case of connection to VELP Ermes and TempSoft ™) - The optional TempSoft ™ incorporates high / low alarm thresholds - Quick and easy calibration Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with Good Laboratory Practice (GLP) FOC Connect is supplied with the MODBUS communication protocol.

IKA ICC 150 Lite Compact Immersion Circulator Working Temperature Room Temp. to 150°C Temperature St (more)ability DIN 12876 ±0.05 K Bath Depth Min. (0 Bar Back Pressure) 5.9 in. (15.0 cm) Features - High-quality compact immersion circulator for efficient operation - PID temperature control ensures precise and reliable performance - LED displays for working and safety temperature readings - Approved for use with flammable liquids in accordance with DIN 12876, safety class III - Integrated pressure/suction pump for internal and external applications - Optical and acoustic warning functions enhance operational safety - Adjustable safety circuit with a range of 0 to 160°C - Integrated stand simplifies cleaning and protects key components - Durable, low-maintenance design with a coated stainless steel housing - USB and RS232 interfaces for monitoring, control, and documentation The IKA ICC 150 Lite Compact Immersion Circulator is a versatile and high-performance solution for precise temperature control in laboratory applications. Designed with advanced PID technology, it provides reliable temperature stability to ±0.05 K across a working range up to 150°C. LED displays offer clear and real-time readings for both working and safety temperatures, while optical and acoustic warning functions enhance operational safety. Its integrated pressure/suction pump supports both internal and external applications, delivering exceptional flexibility in a compact design. Safety and durability are key features of the ICC 150 Lite. Approved for use with flammable liquids in accordance with DIN 12876, safety class III, it includes an adjustable safety circuit (0 to 160°C) and overflow detection to ensure secure operation. The integrated stand simplifies cleaning and protects critical components, while the coated stainless steel housing ensures durability and low maintenance. With USB and RS232 interfaces for seamless monitoring and control, this immersion circulator is an essential tool for efficient and reliable temperature management in any laboratory. INCLUDED: The IKA ICC 100 Lite Compact Immersion Circulator includes: - ICC 150 Lite Compact Immersion Circulator - Power Cord - Operators Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

This listing is for a Merck Samplicity G2 Filtration System.The unit is in full working condition an (more)d is ready for immediate release.The Merck Samplicity G2 Filtration System revolutionizes sample preparation for High Performance Liquid Chromatography (HPLC) by offering a vacuum-driven solution that enhances efficiency and user comfort.Key Features:Vacuum-Driven Filtration: Utilizes a vacuum pump to simplify the filtration process, decreasing the manual effort often required in traditional methods.Multi-Sample Filtration: Allows filtration of 1 to 8 samples simultaneously, increasing throughput by up to 35%—perfect for busy labs.User-Friendly Operation: Designed with a simple lever mechanism, enabling quick recovery of clean samples in seconds, which aids in maintaining workflow efficiency.Millex Filter Compatibility: Fully compatible with Millex filters, ensuring reliability and effectiveness in a variety of HPLC applications.Ergonomically Designed: Reduces manual strain compared to syringe filtration, promoting better user health and comfort during repetitive tasks.Applications: HPLC Sample Preparation:Ideal for preparing samples that require filtration before analysis, particularly those that are viscous or contain particulates.Filtration of Challenging Samples: Well-suited for samples that are difficult to filter, such as those with high viscosity or substantial particulate matter, ensuring consistent results.Key Benefits:Increased Efficiency:Streamlines the sample preparation process, significantly cutting down on time and effort, allowing for quicker analysis turnaround.Enhanced Accuracy:Provides reliable filtration, minimizing the risk of contamination or sample loss, crucial for maintaining analytical integrity.Reduced Manual Fatigue:The design alleviates the physical strain associated with manual filtration methods, improving user comfort and lowering injury risk.

Branson SFX250 Sonifier w/ 1/2" HornFeatures - 20 kHz ultrasonics for quiet tabletop operation. - Sa (more)mple sizes from 0.2 to 500 mL. - High-efficiency, handheld and stand-mountable converters require no internal cooling. - Scrollable, multifunction screen with pushbuttons. - Continuous or pulsed ultrasonics. - Amplitude control range from 10 to 100%. - Microtip mode limits amplitude to 70% to extend tool life. - Control modes include time, temperature, and energy. - Advanced energy control mode delivers precise energy input in continuous or pulse modes. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and sonification duration. The Branson SFX sonifer gives users ultimate control with an amplitute range of 10 to 100% along with continous or pulsed ultrasonics. These smaller, highintensity tips are ideal for processingsmaller samples in Eppendorf vialsor similar vessels. Sizes range from3/32" to 1/4". The SFX250 and SFX550 are part of the new SFX Series of Sonifiers from Branson, designed to bring the industry’s most advanced sample-processing capabilities to your laboratory. The SFX Series brings a new level of ease, precision, and repeatability with advanced energy and temperature control modes, process monitoring capabilities, and programming features. In Energy Mode, the SFX Series power supply manages the processing cycle to deliver a precise, user-determined input of ultrasonic energy (measured in joules), either continuously or pulsed. The SFX Series automatically compensates for any variability, extending or shortening the cycle as needed to deliver the precise energy output. With true temperature control (requires separate temperature probe), the SFX Series power supply maintains the temperature of the sample to within a user-specified range, automatically adjusting the ultrasonic pulse length to regulate the temperature rise and prevent overheating. For assured repeatability and precision on a greater scale, the SFX Series enables users to create and store up to 20 sample-processing programs. Program parameters include continuous or pulsed ultrasonics; time, energy, or temperature control modes; pulse on-time/energy, off-time, and total on-time/energy; or amplitude as a percentage. In operation, Sonifier SFX Series monitors ongoing processes on a scrollable, digital screen, providing continuous updates of key variables including power level, energy usage, sample temperature, and experiment progress. Features:Click Here to View Product Video INCLUDED: The Branson SFX250 Sonifier w/ 1/2" Horn includes: - Converter - 1/2" Horn - Cable - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Ohaus VXMNPS Digital Mini Pulsing Vortex Mixer, 120V Orbit 0.1 in (2.5 mm) Speed Range (On Mode) 30 (more)0 rpm to 2,500 rpm Control Analog Features - Analog control allows for variable speed adjustments from 300 to 2500 rpm in On Mode, and up to 3500 rpm in Touch Mode - Continuous-duty rating ensures reliable operation for extended periods in demanding laboratory environments - Small orbit of 0.1 in (3.5 mm) is ideal for effective mixing of microplates - Compact design with dimensions of 10.5 in x 4.5 in x 5.4 in, making it easy to fit into any lab space - sturdy construction with a durable Cycoloy housing for long-lasting use - Includes microplate adapter and cup head for versatile applications like ELISA assays, PCR preparations, and more - Easy operation with an analog knob for speed control The Ohaus VXMPAL Analog Microplate Vortex Mixer, 120V, is designed for reliable and continuous-duty mixing of microplates across a broad speed range. This analog model features variable speed control via a simple knob, allowing for precise adjustments from 300 to 2500 rpm in On Mode, and up to 3500 rpm in Touch Mode. Its robust construction, with a durable Cycoloy housing, ensures long-lasting performance in demanding laboratory environments. The mixer’s small 0.1-inch orbit makes it ideal for effective mixing of microplates in applications such as ELISA assays, PCR preparations, and cell disruptions. Compact and easy to use, it includes a microplate adapter and cup head, offering versatility for various lab tasks. INCLUDED: The Ohaus VXMNPS Digital Mini Pulsing Vortex Mixer, 120V includes: - Microplate Adapter and Cup Head - Power Cord - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Stainless steel 4-load-cell ramp platforms, equipped with LD4N platform lifting system useful for ma (more)intenance purposes. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.