IonOptix 10um Geo Factor 1.17 Stiffness 2.2 N/m Sensor for Optiforce

Suitable for laboratories that need to sterilize small tools, this small stove has excellent thermal (more) stability, with natural ventilation.     Inner chamber in aluminum for better heat diffusion.     Front panel with bimetallic thermoregulator with fluid expansion probe, mechanical timer from 0-120 minutes + infinite.     Equipped with 2 shelves with the possibility of inserting up to 5     Protection class IP40

This Amorgard ScrubKart Mobile Hand Wash Station was removed from a university lab where it was surp (more)lus to requirements. We were assured by the site that it is in good working order. The unit powers up but we did not test it further. It is in good cosmetic condition with some marks from use. Included with it are 4 x 10L Liquid Containers. 2 for clean water, and 2 for wastewater. Dimensions:L 65cm x W 75cm x H 1456cm

This Soxtec Avanti 2050 Auto Fat Extraction System was removed from a university lab where it was su (more)rplus to requirements. Included are; 1 x Foss Tecator 2050 Soxtec Avanti Auto Extraction UnitPart no. 10007330 1 x Foss Tecator 2050 Drive UnitPart no. 10007338 The item powers on with the drive unit supplying power and controlling the extraction unit. It was not tested further. It seems to be missing a control unit. The item is in reasonably good cosmetic condition with some marks from use.

Promega Glomax 20/20 Luminometer This system was removed from a university lab where it was surplus  (more)to requirements. The unit powers on and is in good condition with minimal wear. It successfully runs the luminescence measurement program. No further testing was conducted. Specifications: - Model: 2031-000 - Serial No.: 203001378 - Device Configuration: - 20/20 Luminometer Injectors: 0 - GUI Version: 5.0.11 - Firmware Version: 7.12 - FPGA Version: 0011 - FPGA ID: 0800

Baker Ruskinn Invivo2 400 Incubated Workstation Glovebox and Iconic Gas Control This system was remo (more)ved from a university lab where it was surplus to requirements. The unit powers up and has been temperature tested (thermometer not included).It is in good cosmetic condition internally/externally, with the display screen and internal light/socket in working order. The previous client has stated that it has a faulty O2 sensor, this was confirmed on-site during testing.Therefore, it is listed as Spares/Repair. Also includes; 2 x Power leads3 x Gas feed hoses1 x Data cable

Perkin Elmer Janus G3 Standard Varispan Deck Liquid Handler This item was removed from a university  (more)laboratory where it was surplus to requirements. It powers up when switched on and is in good used cosmetic condition. Further testing has not been conducted, but we were informed they were in working condition prior to removal. Includes a deck plate for 24 microplates. WinPrep software is available for setup with a PC upon customer request. Specifications.- Model: Janus G3 - Serial No.: JA2049N3797

Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up but has an issue with its cycle timer. It is sold for spares/repairs.

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: stainless steel wire Nominal value: 50 mg Material: stainless steel Exceptional Measurement Precision F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

M1 Mass Standard - knob weights - set (1 g - 1 kg), wooden box.

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Scale HY10.H for statistic control Scales HY10.PGC series is equipped with module for control of pac (more)ked goods. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after pre-defined quantity of packages (samples) has been controlled. Number of the packages is fixed by scale program depending on product batch size. Scales features 10,1" colourful, graphic touch screen display and full alphanumeric keyboard aiding scale operation and setting control parameters. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scales memory and at the same time it can be printed by printer connected to the scales. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).