Heidolph RZR 50 L

This AEI Technologies Carbon Dioxide Analyser & Sensor was removed from a university lab where i (more)t was surplus to requirements. Included are; Carbon Dioxide AnalyzerModel - CD-3A Carbon Dioxide SensorModel - P-61B The item powers on, connecting together with the cable. We were unable to test it further. The item is in a reasonable, used cosmetic condition. It is supplied with the original packaging.

This FluidX Xtp-1152 was removed from a university lab where it was surplus to requirements. This it (more)em powers up and is in good cosmetic condition. It has not been tested further.

Baker Hypoxycool Culture Media Hypoxia Conditioner This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside. It was tested temperature tested (thermometer not included), but no other functions would run without gas being connected. We are unable to do that at our facility. Internal dimensions 38 x 38 x 30cm (LxWxH)

Heraeus B12 incubator. Temperature range from ambient +5ºC to 70ºC. Heating time 40 min at 37 °C. 13 (more)1 L capacity. Natural convection. internal glass. Digital. Timer function to activate/deactivate the incubator. Stainless steel interior. Microprocessor control. 2 trays. Maximum load per shelf: 20 kg. Rear RS 232 port. External dimensions (LAF) 696*850*540mm; internal 552*610*390mm. weight 55 kilos User manual.emperature range from ambient +5ºC to 70ºC. Capacity 131 L. Natural convection. Internal glass. Digital. Microprocessor control. 2 trays. Manual. Features Specifications

Mini-rotator Bio RS-24 provides vertical rotation of the platform. The rotator is an ideal instrumen (more)t for preventing blood coagulation in tubes and for fulfilment of procedures of biological components extraction. The device is simple to operate; it is designed as a low cost solution. Rotator can be used in cold rooms or incubators, operating at ambient temperature range +4°C to +40°C. Speed control range: 5 – 30 RPM Digital time setting: 1 min–24 hrs/non–stop Vertical rotation movement: overhead, 360° Maximum continuous operation time: 8 hrs Overall dimensions (WxDxH): 325 x 190 x 155 mm Weight: 1.4 kg

This Edwards PRM 10 Vacuum Gauge Head Part no. D021-66-000 was removed from a university lab where i (more)t was surplus to requirements. The unit is in reasonably good cosmetic condition but has some marks from use. It has not been tested. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Envair Bio 2+ Class 2 Microbiological Safety Cabinet This was removed from a laboratory where it was (more) surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included. Internal dimensions:Dx55 Wx106 Hx70cm

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Gilson MyPIPETMAN Select P5000, 500-5000 uL PipetteFeatures - Designed to be ergonomic, safe, and re (more)liable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 500 to 5000 uL - 3 Year Manufacturer's Warranty