Heidolph Heat-On Block 1 Liter

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

Vortex stirrers with Ohaus microplate The high speed and small orbit make these mixers perfect for m (more)ixing microplates effectively. All models are designed for continuous laboratory operation. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: Touch / Standby / On switch; LED display for speed and time, buttons for adjusting default values. Single or double holders for microplates are available as accessories. - Safety with high-speed mixing: the exclusive accessory locking system allows the mixer to operate safely over the entire speed range. - High quality motor that allows continuous operation and load capacities up to 1.1 kg. - Effective speed control, from low rpm for gentle shaking to vigorous, high-speed, vortex mixing for difficult samples. The product includes: Small cup (code 30400210) Microplate support (Single) (code 30400215) Applications ELISA tests, PCR preparations, digestions, cell destruction Display Independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models), and marked knobs for variable speed control (analog models) Operation Detachable three-wire cable and plug (included) Communication N / A Structure Cycoloy Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

Select Incubat reconditioned incubator. Volume 36 L. Ventilation by natural convection. Adjustable  (more)from ambient temperature +5 ºC up to 80 ºC. Regulation and digital reading of temperature and time of operation. Stability ± 0.1 ºC. Uniformity ± 0.5% to temperature of work. Error from setpoint ± 2 % at working temperature. Resolution 0.1 ºC. Interior door of tempered glass. It is supplied with two trays and four guides. They do not have RS232 output .Thermostat adjustable.

Termobloque Fibertron 9560. Temperature max. of 120 ºC. Block for 24 tubes. Analog Control. Specific (more)ations: 220-240 V; 50-60 Hz

The VELP stirring rod with 6 hole vane is ideal for the low / medium viscosity range to a medium low (more) speed range. This stirring rod is compatible with ES, LS, DLS, LH, DLH, PW, OHS series stirrers. It generates a tangential flow with reduced turbulence and with a light mixing of the substances. When choosing the correct stirring rod it is important to consider the power of the stirrer, the viscosity of the substance and its volume.

Yamato LT-400A Overhead Stirrer, 100-120V Speed Range 10~300rpm Max Torque 0.9N•m (9.0kgf•cm) Motor (more) DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with higher torque for high viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Speed range 10~300 rpm. INCLUDED: The Yamato LT-400A Overhead Stirrer, 100-120V includes: - Clamp - Safety Cover - Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.