HACH COD REACTOR 16500

Chemically resistant oil-free diaphragm vacuum pump used for a wide range of laboratory applications (more). It features PPS heads, PTFE lined diaphragms and FFPM valves. Technical features Flow rate (max.) 30 l / min Final vacuum (max.) 15 mbar (abs.) Pressure (max.) 0.5 bar (rel.) Permissible fluid temperature 5-40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: PPS Applications Filtration Degassing Drying Fluid suction Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Small ecological footprint Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

MSE 4 x 200ml Swing-Out Rotor for Harrier 18/80R This item was removed from a university laboratory  (more)where it was surplus to requirements. The rotor is in good cosmetic condition and includes 4 x 200ml buckets. Specifications.- Maximum Speed: 6000 RPM. - Model: 43124-141 - Serial No.: B012R 9070

This BD Biosciences ACCURI C6 Cell Sorter System was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but as there were no software discs or testing solutions with it we had our service engineer observe the system initialising without the cover on. They reported that it initialised as it should. It is in very good cosmetic condition with only minor marks from use.

Baker Hypoxycool Culture Media Hypoxia Conditioner This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside. It was tested temperature tested (thermometer not included), but no other functions would run without gas being connected. We are unable to do that at our facility. Internal dimensions 38 x 38 x 30cm (LxWxH)

Termoagitadores MB100 Series. Models: MB100-2A (2 microplates); MB100-4A (4 microplates). Range tem (more)perature: RT+5ºC to 70ºC. Timer from 1 min to 99h59min. Resolution: ± 0.1 ºC. Accuracy: ± 0.5 º. Speed of agitation from 100 to 1200 rpm. Orbit 2 mm warm-up Time (20ºC to 70ºC) ≤25 min. It shows the price for the model MB100-2A. Use the drop-down for other models.

This listing is for a Brand New Leosmak LEO-010 Compact freeze dryer sold through ULMfreezedryers.co (more)mWe are stock holders in UKPrice before VAT - £7,300Are you ready to revolutionize the way you store food? The Leosmak LEO-010 Freeze Dryer is your ultimate solution for preserving the taste, texture, and nutritional value of your favourite foods. Designed for both home chefs and small businesses, this advanced freeze dryer ensures that your meals remain fresh and delicious for months, reducing waste and saving you money.What’s IncludedLEO-010 Freeze Dryer.Drainage hose with connector.1 litre of oil.Spare temperature sensor. Leosmak bag.Operating manual.Catalogue.Features 5 shelves, 5 trays, 0,7 m2 shelf area.Freeze dry 10KG fresh food per batch.GN 1/1 Stainless steel trays.Freezing and heating range: -45°C - +70°C.Short Freeze Drying Time: Our advanced technology ensures efficient and rapid freeze drying, preserving the quality of your food.100% Stainless Steel Construction: Durable, easy to clean, and designed to withstand rigorous use while maintaining hygiene.Washable Chamber: No electrical components in the chamber means easy maintenance and enhanced safety.Plug and Play Operation: Simple setup allows you to start freeze drying immediately, even in a home environment.Low Noise Operation: Designed for quiet performance, making it suitable for home use without disturbing your daily activities.Included Vacuum Pump: Comes with a high-quality vacuum pump to facilitate the freeze drying process.Fully Automatic Process: Set it and forget it! Enjoy hassle-free operation with minimal supervision.Wi-Fi Monitoring: Control and monitor your freeze dryer remotely via our Android or iOS application.Freeze drying of sweets & candies. Dimensions Freeze dryer exterior dimensions: 600mm W x 930mm D x 1070mm H.Perfect for counter top, cart, or table. Weight 157KG. Power Required power supply: 220V, 3,2 kW.Energy consumption: ~7,5 kWh/1kg/standard batch. Shipping Info Shipping dimensions: 120x80x140 cm.Gross weight: 175 kg.Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty Min. 24 months, extendable warranty.

Lasers: Blue Solid State: 488 nm, 55 mW, Software Controlled Red Solid State Diode: 638 nm, 50 mW, S (more)oftware Controlled Violet Solid State: 405 nm, 80 mW, Software Controlled Configuration: Nominal 90 µm spatially separated beam spots Flow cell: 430 µm x 180 µm rectangular channel Collection optics: Fixed integrated optics and quartz flow cell design with a numerical aperture of > 1.2 Detector filters: Forward Scatter: 488/20 Blue Laser: 525/40, 575/30, 614/20 , 675/20, 695/30, 755LP Dyes: FITC, PE, ECD, PC5 or PEC5.5, PECy7 Red Laser: 660/20, 725/20, 755 LP Dyes: APC or Alexa Fluor 647, APC-Alexa Fluor 700, APC-Cy7, APC-Alexa Fluor 750 Violet Laser: 450/50, 550/40 Dyes: Pacific Blue, Krome Orange Forward Scatter Detector: Fourier design providing up to 3 measurements of forward angle Side Scatter Detector: High performance photodiode with electronic attenuation Fluorescence Detectors: FL1 – FL6 Fluorescent Detectors Flow rates: Continuous pressure is applied to the sample tube based on user selected flow rates: Low, Medium and High Performance: Carryover: < 0.1%, Dead volume as low as 2 µL when using Beckman Coulter 12 x 75 mm polypropylene tube and adjustable probe Acquisition modes: 32 tube Multi Carousel Loader (MCL), Single tube sampling mode, Automated work list acquisition, Manual work list mode Mixing: The MCL vortexes each tube individually before sample acquisition Barcode reading: Carousel number, tube location, and tube barcode verified to worklist Biosafety: Biohazard contained wash station thoroughly rinses sample probe Throughput: 10000 normal leukocytes is 82 tubes/hour Scatter resolution: Resolves 0.4 micron particles from background noise using Forward Scatter, Maximum detection of up to 40 microns Fluorescence sensitivity: FITC < 107 MESF, PE < 64 MESF, PC5 < 13 MESF Acquisition rate: 25000 events per second, 90% yield Cytometer dimensions (WxHxD): 950 x 610 x 730 mm Cytometer weight: 104 kg Supply cart dimensions (WxHxD): 724 x 298 x 495 mm Supply cart weight: 30 kg Software included but requires a new licence purchase.

This Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules was removed from a uni (more)versity lab where it was surplus to requirements. &nbsp;The unit powers up and is in reasonably good cosmetic condition. It is missing one of its feet.

Labconco FreeZone 8L -50C Benchtop Freeze Dryer with PTFE coil and collector Features - Patented moi (more)sture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 8 Liter Benchtop Freeze Dryers are designed forlyophilizing moderate sample loads. The compact design is ideal for labs withlimited floor space. The upright stainless steel collector coil holds 8 litersof ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration systemcools the collector to -50C (-58F), suitable for aqueous samples.Lyo-Works™ OS provides a real time display of collector temperature, vacuumlevel and optional End-Zone™ end point detection system, shown on a 5"full color, capacitive touch screen. Models with PTFE-coated collectors thatcan withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 8Lof ice before defrosting -50C (for aqueous samples) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Lyo-Works OS provides a real time display of collector temperature and vacuum level One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700802000 FreeZone 8L -50C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty