Safety cabinet COMBISTORAGE 3 CHEMISAFE

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

This AEI Technologies Carbon Dioxide Analyser & Sensor was removed from a university lab where i (more)t was surplus to requirements. Included are; Carbon Dioxide AnalyzerModel - CD-3A Carbon Dioxide SensorModel - P-61B The item powers on, connecting together with the cable. We were unable to test it further. The item is in a reasonable, used cosmetic condition. It is supplied with the original packaging.

Purite Select Purification System L300150 with Storage Tank This was removed from a university lab w (more)here it was surplus to requirements. The system powers up and pressurises but was not tested further. It is in reasonable cosmetic condition with marks from use. Both filters, Pretreat 8 and Puripac PP8 expired 15/02/23 100L Storage Tank

Erlab Captair Filtair 606C fume hood. Pre-filter. Carbon filter NOT included. Front air velocity: 0. (more)4 to 0.6 m/s. Analogue air velocity flowmeter. Electrogalvanised steel structure and front and side panels made of chemically resistant acrylic. White light. Wall feedthrough. External dimensions: 600*970*600 mm. User manual not available. Filters must be ordered separately depending on the application. Available filters: AS for organic vapours (+350 €); BE+ for organic vapours and acid vapours (+530 €); F for formaldehyde vapours (+485 €); and, K for ammonia vapours (+570 €). The Erlab Filtair 606 fume hood is a device designed to protect the user from toxic and hazardous fumes during chemical experiments. With its advanced filtration system, this hood ensures efficient gas extraction, maintaining a safe and clean working environment in the laboratory. In addition, its compact and ergonomic design makes it ideal for small spaces, offering comfort and functionality to the user.

This listing is for a Watson Marlow 313S Peristaltic Pump.The unit is in full working condition and  (more)is ready for immidate realese.The Watson Marlow Peristaltic Pump Model 313S is a versatile and reliable solution for fluid transfer in various laboratory and industrial applications. Here are the key features and specifications:Key Features:Speed Ranges: The pump offers two selectable speed ranges:50 rpm400 rpmSpeed Control Ratio: Provides a 20:1 speed control ratio for precise adjustments, allowing for a wide range of flow rates.Operating Voltages and Frequencies: Compatible with a global power supply range of 110-240V and operates at 50/60Hz, making it suitable for use in different regions without the need for a voltage converter.Compact Dimensions: The pump has a compact size, measuring 285 x 167 x 120 mm (LxWxH), which helps save valuable bench space.Weight: Weighing 5.35 kg (12 lbs), it is lightweight enough for easy handling and placement in various settings.Power Rating: The pump operates at a power rating of 100 VA, ensuring efficient performance while maintaining low energy consumption.Applications:The Watson Marlow 313S peristaltic pump is suitable for various applications, including:Chemical and Pharmaceutical Processing: Ideal for transferring viscous and sensitive fluids without contamination.Laboratory Research: Commonly used in laboratories for applications requiring precise and controlled fluid transfer.Food and Beverage Industry: Useful for pumping food products or ingredients where hygiene and safety are critical.Water Treatment: Employed in processes requiring accurate dosing of chemicals and additives.

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your champions. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (610 x 610mm) with non-slip rubber mat included.

GBC Cintra 10 UV-Visible Spectrometer This was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further at our facility. The lab confirmed it was working when last used. It is in good cosmetic condition with minor marks.

Sequenom Agena MassARRAY Analyzer 4 System RS1000, PHX-1 & Accessories This was removed from a  (more)university lab where it was surplus to requirements. The system powers up and everything communicates but we were unable to test it further at our facility. The touchscreen on the nanodispense does not work, but we have replaced it with a monitor, mouse and keyboard. There is also a complete peripheral setup provided for the inbuilt PC in the PHX-1 system. Included in the system are; Sequenom Agena MassARRAY Analyzer 4 PHX-1Model: PHX-1Serial#: PX10060104 Sequenom Agena MassARRAY Nanodispenser RS1000Model: RS1000Serial#: 10P0413RS-01 The system also includes the following: Windows XP Software DiscNI Vision Deployment Engine for One UserMassARRAY Nanodispenser RS-1000 User's Guide v1.2.1WebPAM Software DiscFastTrak TX2300/TX4300 Quick Start GuideVarious Replacement parts (shown at end of slide)Various Plates for plate reader.

Accuris AP1096 IsoPure 96 Automated Purification System Sample Capacity 96 Samples / 50ul to 1000ul  (more)Display 7.0 Inch Color Touch Screen Program Memory 100 Programs (Internal Memory) Features - Compatible with all popular magnetic bead kits - Touch screen panel for on-board programming and operation - Process up to 96 samples in deep-well plates - 8-position carousel with 2 heating blocks - Sample volumes from 50µl to 1000µl - Lysis and elution temperature range of Ambient +5°C to 120°C - Variable mixing speeds with 10 levels to select from - Ultraviolet sterilization lamp (UVC) inside the processing chamber provides effective elimination of most bacterial, viral and stray genomic DNA contaminants The Accuris AP1096 IsoPure 96 Automated Purification System is a high throughput, automated system that improves the efficiency and reproducibility of magnetic bead-based purification protocols. Capable of processing up to 96 samples at one time, the instrument is easy to set up and program. Mixing, magnetic bead transfer, washing, and elution steps are performed automatically. The purification process can be completed within 10 to 60 minutes depending on the type of reagent kit used and complexity of the program. The IsoPure™ 96 can be programmed by using the color touch screen or the included mouse. After a protocol has been created, the instrument will calculate and display the estimated time for each step and the total time. Typical step settings include: - Tip Comb Loading and Unloading: Automate tip comb loading and unloading by designating the respective plate positions in the script. - Mixing: Parameters for mixing time, speed, and amplitude can be programmed for each step of the protocol. - Temperature Control: Heating of the sample mixture during the lysis and elution steps significantly improves the purity and yield of the target molecule. The IsoPure 96 is equipped with 2 heating blocks on the plate carousel that can be precisely set to temperatures from ambient + 5°C to 120°C. IsoPure deep well plates fit into the heating blocks for efficient heat transfer. A cooling fan inside the processing chamber maintains the ambient operating temperature to ensure consistent results. - Bead Collection and Release: The complete collection of magnetic beads from sample mixtures is crucial for maximizing the yield of purified analytes. The IsoPure software offers full control of magnetic parameters to ensure cleaner extractions. General settings allow control of magnet speed, position, repeat collection cycles, etc, to guarantee consistent yields. Accuris Instruments has partnered with leading magnetic bead kit manufacturers to develop and optimize protocols for specific applications. To request scripts for specific kits, or for assistance in optimization, please contact us. An ultraviolet sterilization lamp (UVC) inside the processing chamber provides effective elimination of most bacterial, viral and stray genomic DNA contaminants. This additional safeguard reduces the possibility of unwanted DNA/RNA contamination of critical samples that could be amplified downstream in a PCR detection assay. UV sterilization time can be adjusted based on specific program requirements to ensure a sterile environment prior to purification. The IsoPure 96 can store up to 100 program files which can be transferred between instruments, or to a computer for storage or sharing. Simply insert the included flash drive to export the selected files. Programming control can be done via the touch screen, or by using the included mouse. A PC can also be connected for remote programming. Accuris offers high-quality deep well plates and magnetic tip combs designed to fit the IsoPure 96. Produced using virgin polypropylene and packaged in a sterile facility, these consumables are guaranteed to be contaminant-free. The IsoPure 96 also accepts industry-standard 96 deep well plates and tip combs designed for high throughput purification systems. INCLUDED: The Accuris AP1096 IsoPure 96 Automated Purification System includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty