Büchi Glas Uster Tool Carrying Case Werkzeug Koffer Spare Parts Ersatzteile

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

Leitz MicroManipulator Lab This item was removed from a university where it was surplus to requireme (more)nt. The unit is in good mechanical working order and good cosmetic condition, we are unable to test it further at our facility.

This Tecan Genesis RSP 100 Liquid Handling System with 2200 new 1000ul Tips was removed from a unive (more)rsity lab where it was surplus to requirements. The item powers on and is in good cosmetic condition, we cannot test it further at our facility as it requires connection to a PC with relevant software installed. Includes the following: 1 x case of 96 Tecan Series Disposable Tips order No. 612 512.11 x Gemini Software Manual V3.101 x Tecan EVOware Training handbook1 x Gemini Software Training Course booklet1 x Genesis RSP Operating Manual1 x Genesis Instruments Setup and Service Manual V4.1

Perkin Elmer Janus G3 Standard Varispan Deck Liquid Handler This item was removed from a university  (more)laboratory where it was surplus to requirements. It powers up when switched on and is in good used cosmetic condition. Further testing has not been conducted, but we were informed they were in working condition prior to removal. Includes a deck plate for 24 microplates. WinPrep software is available for setup with a PC upon customer request. Specifications.- Model: Janus G3 - Serial No.: JA2049N3797

The MPS R device comprises electromagnetic MPS module and R touch panel featuring 5.7” display (more). It has been designed to be integrated into weighing systems already owned by the customer. Compact design plus integrated electronics make MAS module easy to be adapted into technological lines and built inside customer-owned devices. It is possible to perform the measurements using the under-pan weighing method wherein the load is suspended beneath the module or a regular weighing pan. Due to high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The module has been equipped with RS232 and USB type B interfaces. Dedicated freeware software, R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. An innovative algorithm for automatic search of electromagnetic weighing modules is a guarantee for a remarkable ease of connection of a module to a computer. With R Panel software, the complete functionality of R series balances is available via PC. R Panel functionality has been implemented in RLab program as one of its numerous functions. MPS.R can also be integrated with E2R Weighing Records and E2R PGC.

When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution. Consi (more)stently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure deionization system, the PURELAB Chorus 1 enables you to focus on attaining accurate results while ensuring an uninterrupted workflow. Advanced PureSure Deionization – Eliminates trace ions that leach into your water and provides advanced warning to change the purification packs. Fully Recirculating –  Ensuring microbial purity and guaranteeing pure water at the point-of-use. Real-time TOC Monitoring – Provides complete confidence in organic purity. Integrated Filtration – Ultrafiltration or microfiltration filters out endotoxins, proteins, nucleases, and particulates. Full Spectrum UV Treatment Dispense Flowrate Up to 2.0 l/min Inorganics (at 25°C): 18.2 MΩ.cm Total organic carbon (TOC): 1 – 3 ppb Bacteria: <0.001 CFU/ml Bacterial Endotoxin: <0.001 EU/ml pH: Effectively neutral Particles: < 0.05 µm RNase: <1 pg/ml DNase: <5 pg/ml Purification pack capacity: Liters to 18.2 MΩ.cm = 94,100/(µS/cm + (2.3 x ppm CO2)) Source – originally from potable supply, then pretreated: Preferably RO produced by PURELAB Chorus 3 or filtered service deionization (SDI) or distilled. Fouling index (max): 1 (5 – 10 micron membrane prefilter is recommended for all non-RO feeds Service deionization (SDI) – MΩ.cm: 1 MΩ.cm minimum resistivity at exhaustion Reverse Osmosis (RO) – µS/cm: Recommended <30 µS/cm Free Chlorine: 0.05 ppm max TOC: <50 ppb max (RO feed) Carbon dioxide: 30 ppm (max recommended) Silica: 2 ppm (max recommended) Particulates: Filtration down to 5 – 10 micron advisable to protect internal and/or point of use filters Temperature: 1 – 35°C (Recommend 10 – 15°C) Flowrate (maximum requirement): 130 l/hr (34 USG) Drain requirements: Up to 2 l/min (0.5 USG) Feedwater pressure: 0.7 bar (10 psi) maximum; 0.07 bar (1 psi) minimum Dimensions (HxWxD): 435 x 375 x 340 mm Weight: 19 kg Excluding new filters

Factory settings: 2 – 3°C Suitable for: 2x 10L box or 2x 18L bag Dimensions (HxWxD): 800 x 635 x 435 (more) mm

Memmert UF75plus Forced Circulation Oven 74L, 115V Working Temperature Range Min. 10°C above ambien (more)t up to +300°C Oven Type Forced Air Circulation Chamber Volume 74 L (2.61 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 74 L (2.61 cu.ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF75plus Forced Circulation Oven 74L, 115V is a versatile and high-performance oven designed to meet the rigorous demands of laboratory applications. Its working temperature range from 10°C above ambient to +300°C provides the flexibility needed for various thermal processes. Equipped with TwinDISPLAY, this oven offers precise control through its multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays, ensuring reliable and easy monitoring of all critical parameters. The 74L (2.61 cu.ft.) chamber, with its stainless steel interior and deep-drawn ribbing, allows for uniform heating, while its easy-to-clean design adds to its convenience and longevity. The UF75plus prioritizes safety with comprehensive mechanisms such as the overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB. These features are further enhanced by AutoSAFETY technology, which includes over- and undertemperature monitoring, ensuring that any deviations trigger timely alarms. The oven's advanced functionality is supported by the AtmoCONTROL software, allowing users to program, manage, and transfer data through a USB or Ethernet interface. With additional features like Function SetpointWAIT, which ensures the process begins only when the target temperature is reached, and the ability to adjust fan speed and fresh air admixture in 10% increments, the UF75plus is a top-tier solution for precise, safe, and efficient thermal processing. INCLUDED: TheMemmert UF75plus Forced Circulation Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Highest Precision The E1 class mass standard of 50 kg is a cylindrical standard with the highest pre (more)cision, ensuring accuracy at the highest level. Made of high-quality materials to guarantee stability and reliable results. Ideal for laboratory, research, and industrial applications where weighing precision is crucial.

Heidolph Titramax 1000 Vibrating Platform Shaker The largest model of the Titramax series contains a (more)ll thefeatures of the Titramax 100: a shaking orbit of 1.5 mm, speeds of up to 1,350rpm, and a timer. With a storage capacity of up to six multi-well plates, ahigher number of samples can be processed. The option to integrate the Titramax1000 into the modular incubation system also allows temperature-controlledprocesses to be carried out without problems. With this model, easy loading and removal of the plates canbe carried out comfortably due to the recess and the spacings in the rubbermat.Click Here to View Product Video INCLUDED: The Heidolph Titramax 1000 Vibrating Platform Shaker includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 3 Year Manufacturer's Warranty