Adventurer AX822 Ohaus

This Solartron Schlumberger 1286 Electrothermal Interface was removed from a university lab where ti (more) was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Milestone Ethos plus 2 Microwave Solvent Extraction Labstation This system was removed from a univer (more)sity where it was surplus to requirement. All units are in good cosmetic condition, with the primary unit (Milestone Ethos plus 2) and PC Set-Up turning on, however, there is no power in the LabTerminal 800 Controller. The system is sold for spares/repairs. -1x Milestone Microwave Laboratory Systems LabTerminal 800 Controller1x easywave chip card for the controllerS/N- 0205722 -2x Rotor' for microwave - Relevant vessels and safety shields for rotors -2x ATC-FO sensors for microwave -2x Torque wrenches for rotor -2x Extraction Pipes 1x Monitor (IIyama Prolite B2206WS) and Dell Tower Optiplex GX620Includes: Pipette tracker v3.3 Software

This Matrx by Midmark VIP 3000 Isoflurane Vaporiser was removed from a university lab where it was s (more)urplus to requirements. The unit has not been tested but is in good cosmetic condition and includes its original packaging.

This Miltenyi Biotec autoMACS Pro Cell Separator was removed from a university lab where it was surp (more)lus to requirements. The item turns on and is in good condition with only minor signs of use. When the device started up, it ran into an error with code 7033. The error message warned that the clock timer was not set, and we needed to select the "set_time" option from the user settings. We tried to dismiss the warning by pressing the OK button, but the touchscreen did not respond. Unfortunately, this meant we were unable to perform any further testing. Due to this item is sold as Spares/Repairs.

Applied Biosystems 3130xl Genetic Analyzer This was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition but has some marks from use.

It is the ideal solution for laboratories and institutions requiring the highest precision. The cyli (more)ndrical mass standards are made from the highest quality materials, ensuring their stability and resistance to changes in environmental conditions. This makes them perfect for the calibration of precise measuring instruments. Product Features: Highest Class of Accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden Packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set Includes: 4 mass standards. Applications E1 class standards are ideal for the calibration and verification of precise analytical and laboratory balances, indispensable in metrology laboratories, as well as in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

IKA Roller 10 Basic ShakerRoller shaker with 10 rolls provides smooth rocking androlling action at a (more) fixed speed. Used for mixing blood samples, solid andliquid suspensions and viscous samples. The unit can be used with allconventional tubes and cylindrical bottles. Easily removable attachmentsprovide for quick cleaning in case of sample spills. - Usable at 4 to 50 °C in incubators - Suitable for continuous operation - Removable rolls enable shaking of larger tubes - Easy operation with touch keypad - Shaking diameter: 24,5 mm (height) - Speed range: 30 rpm (fixed) INCLUDED: The IKA Roller 10 Basic Shaker includes: - ROLLER 10 Basic - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 1 Year Warranty Extension with IKA Registration) IKA Roller 10 Basic Shaker SpecificationsType of movementrollingPermissible ON time100 %Speed min.0 rpmSpeed fix30 rpmSpeed displaynoneTimer displaynoneOperating mode continuous operationRolls, number 10Rolls, Ø 32 mmRolls, length327 mmWorking area length350 mmRolls, luffing angle fixed3 °Rolls, max stroke at roll end16 mmRolls, changeable, removableyesDimensions (W x H x D)380 x 115 x 545 mmWeight8.242 kgPermissible ambient temperature4 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage100 - 240 VFrequency50/60 HzPower input24 WDC Voltage24 VCurrent consumption1000 mAComparison of ModelsSpecificationIKA Roller 10 BasicIKA Roller 10 DigitalIKA Roller 6 BasicIKA Roller 6 DigitalType of MovementRollingRollingRollingRollingSpeed Range30 rpm (fixed)5 - 80 rpm30 rpm (fixed)5 - 80 rpmTimerNoYesNoYesNumber of Rolls101066Rolls Diameter32 mm32 mm32 mm32 mmRolls Length327 mm327 mm327 mm327 mmWorking Area Length350 mm350 mm350 mm350 mmDimensions (W x H x D)380 x 115 x 545 mm380 x 115 x 545 mm240 x 115 x 545 mm240 x 115 x 545 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Eppendorf 4 x 50ml Adapters, Cat. # 022638351 New in box Eppendorf 4 x 50ml Adapters, Cat. # 0226383 (more)51 for the A-4-62 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 4 x 50ml Adapters, Cat. # 022638351 are used with the Eppendorf 5810/R Centrifuges. INCLUDED: The Eppendorf 4 x 50ml Adapters, Cat. # 022638351 includes: - Full 6 Month Parts and Labor Warranty

Corepoint Scientific PRF072WWW-0A Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Fr (more)eezer Temperature Setpoint Range Refrigerator: 1°C to 10°C / Freezer: -15°C to -25°C Capacity Refrigerator: 5.2 cu. ft. / Freezer: 1.3 cu. ft. Defrost Method Refrigerator: Cycle / Freezer: Auto Features - Compact, space-saving design with freestanding refrigerator and auto defrost freezer combo - Separate microprocessor temperature controllers and digital displays for precise temperature management - Three adjustable shelves in the refrigerator and two in the freezer with back rails - Audible and visual high/low temperature alarms with remote alarm contacts - Two probes in both the refrigerator and freezer for accurate monitoring - Keyed door locks, magnetic door gaskets, and integrated door handles for enhanced security - Environmentally friendly HFC-free refrigerant (R600a) and foam insulation - Leveling legs and stacking kit included for flexible placement and stability - Auto defrost freezer for reliable performance and reduced maintenance The Corepoint Scientific PRF072WWW-0A Solid Door Laboratory Combo offers a versatile 1°C to 10°C refrigerator and -15°C to -25°C auto defrost freezer in a compact, space-saving design. This freestanding unit features separate microprocessor temperature controllers and digital displays for precise temperature management. With a total capacity of 5.2 cu. ft. for the refrigerator and 1.3 cu. ft. for the freezer, it includes three adjustable shelves in the refrigerator and two in the freezer, all equipped with back rails. The combo unit is equipped with audible and visual alarms, remote alarm contacts, and two probes in both the refrigerator and freezer for accurate monitoring. Additional features include keyed door locks, magnetic door gaskets, integrated door handles, leveling legs, a stacking kit, two probe access ports, and environmentally friendly HFC-free refrigerant (R600a). This auto defrost freezer and refrigerator combo ensures reliable performance and maximizes facility floor space while minimizing long-term maintenance costs. INCLUDED: The Corepoint Scientific PRF072WWW-0A Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Freezer includes: - Stacking Kit - Leveling Legs - Keys for Door Locks - 3 x Adjustable Shelves for Refrigerator - 2 x Adjustable Shelves for Freezer - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty