Laboratory vacuum tap with base

Bio-Rad GelAir Dryer The GelAir drying system is perfect for drying polyacrylamide and agarose gels. (more) With timer control On/off mode works Function modes : Fan only; fan and heat; off Dryer capacity : 4 shelves Without shelve , Without GelAir Drying Frames Dimensions (WxDxH) : 27x43x30 cm Weight : 8 kg

Gene Quant pro RNA/DNA calculator BIOCHROM Pharmacia Gene Quant pro RNA / DNA calculator. Technical  (more)specifications: 100-240 V 50/60 Hz 80 VA. External dimensions (D)x(H)x(W): 34 x 16.5 x 26.5 cm. Equipment not tested, not calibrated

Brandnew. Excellent condition - Excellent price. 12 months warranty. Delivery Scope: - 100x Base pla (more)tform - 100x Microscope slide - 100x Filter card 9,5 mm - 100x Filter card 12,5 mm - 100 x Insert - 100x 2.2ml PP tube with a lid Tested suspension types: - Natural biological fluids such as cerebrospinal fluid, body cavity fluids, synovial fluid, discharges, pus, etc. - Suspensions in isotonic smear solutions, tissue puncture specimen, expectorations, bronchial washings, etc. Features and benefits: - Obtaining of an equal cellular preparate and supernatant from the same sample of tested biological suspension. - Obtaining of specimen (cytospin) by way of filtering the supernatant onto a filtering paper. - Rapid placement of cells on a microscope slide by centrifugal metod with permeation of supernatant onto a filtering paper. - Possibility of supernatant recover on a microscope slide by automatic drain off into a test tube. - Prevention of aerosoling by securing fluid escape into the centrifugal chamber. - Avoidance of infections by application of single-use inserts.

Thermo Haake K10 circulating refrigerated bath. Temperature range from -10 to 100 ºC. Accuracy ± 0.0 (more)2 ºC. Capacity 3 L. Flow 12.5 L/min. PID temperature sensor. Overtemperature and low liquid level protection. Bath opening 13*10*15 cm; total dimension 19.5*36* cm. This Thermo Haake K10 circulating refrigerated bath is ideal for circulating liquids at constant temperature through external closed systems, such as rotary evaporators, photometers, refractometers, viscometers, polarimeters, and spectrophotometers, among others. Furthermore, this refrigerated bath can be used to keep samples at a constant temperature thanks to its electronic PID temperature sensor. Its handling is simple. The pump contains two speeds to reduce turbulence within the bath.

Racks of aluminum for 50 tubes Eppendorf, 10mm in diameter.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

CS 120UB PVC - CHEMISAFE UNDERCOUNTER CABINET - Completely made with a thickness of 18 mm in HD PVC  (more)- Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2+2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

IKA MultiDrive control MT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - Versatile crushing capabilities for hard, soft, or fibrous samples with a range of vessels for coarse and fine crushing - MultiDrive control unit also mixes, grinds, and includes a dispersion vessel and a disposable tube for diverse applications - Features a USB interface for convenient actuation and documentation - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a powerful 1000 Watt output - Interval operation mode enhances coarse crushing and thorough blending with simple activation - Integrated cooling in the milling cup for indirect heat dissipation, keeping coolant and sample separate - User-friendly operation ensured by a clear TFT-display Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output. Interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation.Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control MT Package includes: - 5 Spare Seals - IKA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive MT 150.5 Milling tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty