Laboport SH 840 G KNF vacuum pump system

Technical features Flow rate (max.) 6 l / min Final vacuum (max.) 100 mbar (abs.) Pressure (max.) 2. (more)4 bar (rel.) Permissible fluid temperature 5-40 ° C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PPS Applications Filtration Aspiration of liquids Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Ecological Maintenance free Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Optidrive I55 gear pump

VACUUBRAND RZ 6 Rotary Vane Vacuum Pump Ultimate Vacuum 0.002 mbar (0.0015 Torr) Maximum Pumping Sp (more)eed 4.0 CFM at 60Hz Number of Stages 2 Features - High flow rates even at vacuum levels approaching ultimate vacuum - High water vapor tolerance due to efficient gas ballast; very good ultimate vacuum even with gas ballast - Vacuum-tight at switch-off; external anti-suckback valve not needed - Large oil volume: Long intervals between oil changes - Ease of maintenance due to telescopic design These powerful rotary vane pumps feature a particularly compact design and low weight for pumps of this capacity. They are the ideal solution for a wide range of laboratory and process applications that require low ultimate vacuum at medium to increased gas flow rate. Various packages including pump, oil mist filter, etc. are available. Rotary vane pumps are used when an ultimate vacuum between a few mbar and down to 10-3 mbar must be attained. Typical applications are degassing, lyophilization, fine vacuum distillation and drying chambers. The pumping unit PC 3 is the perfect choice for applications requiring special protection of pump and environment. Designed for use in chemical laboratories, the cold trap helps the pumps to handle large volumes of condensable vapors. The cold trap is metalized for extended coolant life and protected against implosion. INCLUDED: The VACUUBRAND RZ 6 Rotary Vane Vacuum Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 UFEM 1.10 FT.18S2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit (more) most laboratory liquid metering and dosing needs. The UFEM 1.10 FT.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant fluoropolymer flow path materials: PTFE head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 FT.18S2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards XDS35i Dry Scroll Pump Ultimate Vacuum 1 x 10-2 mbar Inlet Connection NW40 Displacement 43 m (more)3h-1 / 25 ft3min-1 Features - Scroll pumps provide oil-free pumping, making them an excellent alternative to rotary vane pumps for clean applications - The XDS pumps feature an innovative bearing shield that isolates the vacuum environment from lubricants, ensuring a totally dry operation and protecting bearings from process gases - Adjustable gas ballast enhances vapor handling, allowing the pumps to be used in applications previously unsuitable for scroll pumps - Achieves a peak pumping speed of 35 m³/h (50 or 60 Hz) for rapid and effective operation - Capable of handling a maximum inlet pressure for water vapor of 35 mbar (23 Torr) - Operates at a nominal rotation speed of 1750 rpm for consistent performance - Exceptional leak tightness of <1 x 10⁻⁶ mbar ls⁻¹ for reliable and efficient operation Edwards XDS35i Dry Scroll Pump Scroll pumps are an excellent alternative to rotary vane pumps where oil free pumping is desirable. The XDS pumps in particular use an innovative bearing shield to isolate the vacuum environment from all forms of lubricant not only making them totally dry, but also protecting the bearing from any process gases. Vapour handling is enabled by an adjustable gas ballast; this allows the range of pumps to satisfy many applications that were previously off limits to other scroll pumps. Click Here to View Product Video INCLUDED: The Edwards XDS35i Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Pitco 35C+ 16 Ltr Tube Fired Gas Commercial Deep Fat Fryer This was removed from a university cateri (more)ng department. It was surplus to requirements. The unit has not been tested as we do not have a gas supply at our facility. It is in reasonably poor cosmetic condition and is in need of a deep clean, and some maintenance.

Kodak DirectView CR500 Computed Radiography Single Plate Reader This item was removed from a univers (more)ity where it was surplus to requirement. This is the reader/imaging part of a radiography system, no other parts of the system are included. It is in excellent condition and powers on, no further testing has been done. The power lead is included.

VACUUBRAND MD 12 NT Diaphragm Pump Ultimate Vacuum 2 mbar (1.5 Torr) Maximum Pumping Speed 7.1 CFM  (more)at 60Hz Number of Heads/Stages 8/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Reduced process times - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs The MD 12 NT diaphragm pump is an especially powerful pump for oil-free evacuation and pumping of non-aggressive gases. The three-stage design of this eight-cylinder pump provides the advantageous combination of very high pumping speed and excellent ultimate vacuum. The flow path consists of aluminum, stainless steel and carefully selected plastics to permit a wide range of applications. The fabric-reinforced double diaphragms are made of highly flexible FKM for extended operating life and high vacuum performance. Eight-cylinder NT pumps feature quiet operation, with smooth and easy-to-clean surfaces. Like all VACUUBRAND diaphragm pumps they operate absolutely oil-free and do not have any sliding components in the gas path. In normal operation they are completely free of abrasion. This eliminates most of the particulate impurities frequently generated inside of scroll or piston pumps. The MD 12 NT is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases, especially for applications in physics and analytics. Due to the very good ultimate vacuum the MD 12 NT is often used as an alternative to rotary vane pumps, for example for vacuum ovens, for very quick and efficient degassing of viscous media, exhaust gas analytics and especially as backing pump for large turbomolecular drag pumps. The particularly high pumping speed enables the usage of bigger vacuum apparatus and with high gas throughput. The pump is extraordinarily silent and exhibits very low vibration making it an excellent choice for sensitive equipment such as electron microscopes. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. INCLUDED: The VACUUBRAND MD 12 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Boekel Scientific 260250 Orbitron Rotator II, 115V The Boekel Scientific Orbitron II Laboratory Mixe (more)r, adjustable speed nutating mixer, is excellent for any application requiring a gentle, low foaming lab agitation. The unit has adjustable speed and is supplied with one white, non-slip dimpled mat and one white, non-slip fat mat. Features: Pad is removable for easy cleaning and test tube transport Gentle, low foaming agitation Adjustable speed from 6 to 23 orbits per minute Small footprint Thin power cord easily passes through incubator door gaskets Rugged steel platform has notches for bungee cords if necessary Fixed position platform Supplied two mats, one dimpled and one flat, and a 12 x 12 tray Can be used in incubator or cold room INCLUDED: The Boekel Scientific 260250 Orbitron Rotator II, 115V includes: - 12 x 12 Tray with Dimpled Mat and Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty