Vacuum pump system Laboport SC 840 G KNF

Varian HS 602 Two Stage Rotary Vane Vacuum Pump This item was removed from a university lab where it (more) was surplus to requirements. It is in very good cosmetic condition and powers on, we are unable to conduct further at our facility.

Edwards Model E2M2 Rotary Vane High Vacuum Pump 2 Two stage Lab This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and draws suction but has not been tested further. It is in reasonably good cosmetic condition, with some marks from use.

Edwards nEXT240T HC - CF100 160W Turbomolecular Pump Ultimate Vacuum <5x10-10 mbar Inlet Connecti (more)on DNISO100-K Pumping Speed Nominal 1439.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for improved performance - Offers direct I/O or serial control; compatible with TAG and TIC controllers for system integration - Oil cartridge and bearings can be replaced in the field with minimal tools - Features multiple drag stages for enhanced compression ratios and increased backing pressure tolerance - Suitable for a variety of demanding applications including high-energy physics, electron microscopy and industrial development - Features a patented bearing suspension system to reduce noise and vibration transmission to the vacuum system - Includes a purge port for safe operation with specialized gases - The permanent magnet upper bearing ensures a hydrocarbon-free environment, reducing contamination The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240T HC - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards XDS46iC Dry Scroll PumpFeatures - Peak pumping speed of 23.5 CFM - Ultimate vacuum of 0.05 m (more)bar (0.04 Torr) - Bearing shield ensures separation between process gases and bearing lubrication to ensure a clean vacuum and no possibility of contamination to lubrication from process gases, which prolongs bearing life - Axial air gap motor reduces overall pump size and gives low power and noise - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single-sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time - Fitted with Chemraz internal valve pads and stainless steel exhaust port for increased corrosion resistance XDS scroll pumps have become industry standard when dry pumping is essential, proving to be a robust and clean vacuum pump solution in a range of applications and processes. The XDS35i pump has an innovative bearing shield that isolates the vacuum environment from all forms of lubricant, making it not only lubricant-free but hermetically sealed. XDS35iNGB variant has had the gas ballast feature removed for applications such as rare gas recirculation and gas recovery. The XDS46i shares many of the same features of the XDS35i but with a peak speed of 40 m3h-1. The pump has been optimised for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar, making it ideally suited for LCMS and ICPMS applications requiring higher pumping speeds. This C variant has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications using corrosive substances. This C version is fitted with Chemraz® internal valve pads and stainless steel exhaust port. INCLUDED: The Edwards XDS46iC Dry Scroll Pump includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump Head, R4HF Four Channel, High Flow The Gilson MINIPULS 3 Peristal (more)tic Pump Head, R4HF Four Channel, High Flow is a versatile high flow pump head with a maximum flow rate of 250 ml/min and a minimum flow rate of 1 ml/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R4HF Four Channel, High Flow includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND PC 611 Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping (more) Speed 2.2 CFM at 60Hz Number of Heads/Stages 4/3 Features - VACUU-SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible result - Easy-to-use application editor allows own process sequences - Meets high vacuum requirements for most high boiling solvents - PC 611 Select allows simultaneous operation of two independent vacuum applications with electronic vacuum control This chemistry vacuum pumping unit is an economic space-saving solution for simultaneous operation of two independent vacuum applications with one single pump. Based on our popular MD 4C NT three-stage chemistry diaphragm pump, the PC 611 select is frequently used for vacuum applications involving even high boiling point solvents. This pump has sufficient capacity for parallel operation of two demanding applications. One application is controlled by the VACUU-SELECT vacuum controller, via an electronic solenoid valve. The second application is controlled by a manually controlled diaphragm valve. Both vacuum ports have integrated check valves to protect against cross contamination and interference. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it detects the boiling pressure and switches to 2-point control mode to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage, and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. INCLUDED: The VACUUBRAND PC 611 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus 30573847 ISTHBLHTSN Thermal Shaker, 120V Orbit 3mm Speed Range 300 to 3,000 RPM Heating Rate ( (more)/min) 5°C/min (/min) Features - Best in class temperature performance. Enhanced electronics and software allow for fast and accurate temperature control you can trust. - Intuitive touchscreen for simple operation and programming. - Set the functions and the comprehensive help screens in one of six languages to guide the user through the operation of the unit. - Easily create programs for repeat applications. Storage for five separate, 5-step programs. - The USB port allows the transfer of test data to a flash drive for data logging and program storage. OHAUS Thermal Shakers are designed for heating and cooling applications that require consistentand precise high-speed shaking with dependable temperature control from 17°C below ambient to100°C. Temperature can be user-calibrated when precision is required. Customize applications withinterchangeable blocks to accommodate tubes & microplates. Intuitive touchscreen allows the user toview all steps of the program while monitoring the progress. INCLUDED: The Ohaus 30573847 ISTHBLHTSN Thermal Shaker, 120V includes: - Screwdriver for Block Removal - Detachable 3-wire cord and plug - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA ROTAVISC hi-vi II HELI Complete Viscometer Speed Range 0.01 - 200 rpm Setting Accuracy Speed 0. (more)01 ±rpm Time Setting Range 0.017 - 6000 min Features - Measures viscosity in diverse settings, from labs to quality control. - Package includes spindle set, protective bracket, temperature sensor, and HELISTAND. - User-friendly 4.3″ TFT display for intuitive menu navigation. - High accuracy: deviation of +/- 1% and reproducibility of +/- 0.2%. - Features stepless speed adjustment for versatility. - Motorized HELISTAND for dynamic viscosity measurement. Regardless of a simple or demanding viscosity measurement -IKA ROTAVISC hi-vi II HELI Complete determines the viscosity of extremelyviscous liquids in all areas of application ranging from the laboratory toquality control. The scope of delivery includes a standard spindle set (SP 7-SP 12), aprotective bracket, temperature sensor and HELISTAND stand incl. T-spindle set. Easy to operate The generous 4.3″ TFT display allows for an intuitive menu guidance. A digitalspirit level also supports the correct set-up of the start-up condition. Thesimple ramp function simplifies repetitive tasks. Highest measurement accuracy The level of measurement accuracy of the ROTAVISC rotational viscometer forboth Newtonian and non-Newtonian fluids is +/- 1 % of the measuring range. Thereproducibility is +/- 0.2 %. Stepless speed ROTAVISC is a viscometer, which offers stepless speed adjustment. Viscosity measurement in motion The motorized IKA HELISTAND moves the mounted viscometer and its rotating bodyslowly and uniformly up and down in the sample ROTAVISC hi-vi II HELI Complete Viscosity measuring range: 800 - 320.000.000 mPas Click Here to View Product Video INCLUDED: The IKA ROTAVISC hi-vi II HELI Complete Viscometer includes: - ROTAVISC hi-vi II HELI Complete - SP set-2 - PT 100.8 - HELISTAND - T-SP-SET - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Manufacturer: ERWEKA Model: TPK 2 S/N: 124164.10d5 MFG date: 2005 Description: The ERWEKA Valve-Box (more) is testing unit for Dry Powder Inhalers.With Dry Powder Inhalers, both the emitted and fine particle dose are affected by the strength and duration of the patient’s inspiration.The ERWEKA Valve-Box allows the user to adjust the air flow from the Vacuum pump in such way, that it complies with the latest pharmacopoeial specifications.If required hard-copy documentation of the test-parameters can be created. Specifications and features: TPK Version 1.07AThe TPK 2 menu system automatically guides the user through the correct test set-up procedure.A series of menus guide the user through the operation of the instrument.Two external pressure ports.4-line LCD display of all parameters.USB printer port interface for data output.U: 240 vF: 50-60 Hz Items delivered: - ERWEKA TPK 2- Power Supply- Instruction Manual as PDF via E-Mail request Condition: The Valve-Box is in very good cosmetic condition and 100% functional tested.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW