GARNER DENVER VTA 80 C 100 Vacuum Pump

Technical features Flow rate 0.5–3.0 l/min Suction (max.) 3 mWg Operating pressure (max.) 1 bar (rel (more).) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

VACUUBRAND ME 4R NT Diaphragm Pump Ultimate Vacuum 100 mbar (75 torr) Maximum Pumping Speed 2.5 cfm (more) at 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping, evacuation and compression - High flow rate even near ultimate vacuum - Adjustment of outlet pressure and vacuum level with regulator valves - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs This one-stage diaphragm pump works as a vacuum generator and as well as a compressor. All parts in contact with pumped media are made of aluminum and selected plastics (PTFE diaphragms and valves). They enable a wide range of applications for non-corrosive gases. The inlet and outlet connections of the ME 4R NT are equipped with regulator valves for vacuum and overpressure, respectively. Both the compression pressure and vacuum level can be adjusted. Inlet vacuum level and outlet pressure are indicated by manometers. This one-stage diaphragm pump is an excellent choice for continuous, oil-free pumping and evacuation of non-corrosive gases and also for compression. Typical applications are vacuum ovens, pressure and vacuum filtrations and generation of compressed, absolutely oil-free air. Inlet- and outlet pressure can be adjusted continuously using the regulator valves. The manometers on inlet- and outlet side enable easy setting of the desired vacuum and pressure levels.INCLUDED: The VACUUBRAND ME 4R NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate and two separ (more)ator bottles on the suction and pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5°C and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Filtration Degassing Vacuum oven Centrifugal concentration Qualitative characteristics Ideal for extremely aggressive / corrosive gases and vapors High compatibility with steam and condensate Integrated gas ballast valve Integrated control of the rotation speed 3-color status display for running / stand-by / error Compact, silent and reliable Chemically resistant compound vacuum system diaphragm vacuum pump, base plate and two separating bottles on the suction and pressure sides Modular; expandable 100% oil-free transfer - then pure transfer, evacuation and compression of gases High compatibility with steam and condensate Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Syringe Size: From 10 µl to 50/60 ml Flow Rate Range (Min/Max): 0.0014 µl/hr with 0.5 µl syringe to  (more)26.55 ml/min with 50/60 ml syringe Maximum Force: 8 kg Maximum Pressure: 8 p.s.i. with 50/60 cc syringe; 100 p.s.i. with 1 ml syringe Step Rate (Min/Max): 1 pulse in 27.6 sec / 200 steps/sec Pusher Advance/Step: 0.8 µm pusher advance per motor step Pusher Travel Rate (Min/Max): 0.7 µm/min to 15 mm/min Dimensions (HxWxD): 114 x 229 x 114 mm Weight: 2.1 kg

CDS Chemical Data Systems 190 Pyroprobe ( No Probes) This was removed from a university lab where it (more) was surplus to requirements. The unit powers up but we were unable to test it further. It is in reasonably good cosmetic condition with marks from use.

This item has just arrived in our stock. Please enquire for further details.

MARSHALL Select MS-OS500 Orbital Shaker, 100-500 RPM Speed Range 100 to 500 RPM Platform Size (W x  (more)D) 12.6 x 12.6 in. (32 x 32 cm) Maximum Load 16.5 lb. (7.5 kg) Features - Orbital shaking motion with a 10 mm orbit size for smooth, uniform mixing - Compact footprint suitable for labs with limited space - Independent LCD display for easy monitoring and setting of speed and time - Timer operation up to 19 hours, 59 minutes with a continuous operation mode available - Maintenance-free brushless DC motor ensures long-lasting, reliable performance - Overspeed detection and protection for enhanced operational safety - Wide range of optional platforms to accommodate flasks and other popular vessels - RS232 interface for remote PC control and data transmission - IP21 protection class provides basic protection against solid objects and dripping water - Designed for smooth and uniform shaking across all speed settings The MARSHALL Select MS-OS500 Orbital Shaker is a highly efficient and versatile laboratory instrument designed to accommodate a maximum load of 16.5 lb. (7.5 kg) with a platform size of 12.6 x 12.6 inches. It operates within a speed range of 100 to 500 RPM, delivering smooth and uniform shaking thanks to its orbital shaking motion and a 10 mm orbit size. This shaker is equipped with a maintenance-free brushless DC motor that ensures reliable, long-term operation. Featuring an independent LCD display, the MS-OS500 allows for easy monitoring and setting of speed and time, with options for continuous operation or timed sessions up to 19 hours, 59 minutes. The compact footprint makes it an ideal choice for laboratories with limited space but requiring robust performance. Safety features include overspeed detection and protection to ensure safe operation under all conditions. The shaker's versatility is enhanced by a wide range of optional platforms that can accommodate flasks and other popular vessels, making it suitable for a variety of applications. Additionally, the unit includes an RS232 interface, enabling remote control and data transmission for integration into automated lab environments. With an IP21 protection class, it is safeguarded against solid objects and dripping water, further enhancing its durability and reliability in busy laboratory settings. INCLUDED: The MARSHALL Select MS-OS500 Orbital Shaker, 100-500 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

SENTRON ARGUS portable pH meter Measuring ranges: pH: 0 - 14 pH Resolution: 0.01/0.1 Temperature: 0  (more)- 60°C Dimensions: 11 x 5 x 5 cm Weight: 1kg Sold without probe

Stainless Steel HRP.H Platform Wherever high readability and precision are important. Wherever good  (more)repeatability in harsh industrial conditions matters. Stainless Steel HRP.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable Stainless Steel HRP.H Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. Stainless Steel HRP.H Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential Stainless Steel HRP.H Platforms work with one of two weighing terminals: PUE HY10 or PUE 7.1. The terminals’ software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.